1) friction-reducing groove
减摩槽
1.
Based on it, a new type of three-dimensional chip-breaking grooves with friction-reducing grooves is designed, and the conclusion that the friction-reducing grooves can reduce the main cutting force and improve the chip-breaking performance of the cutter is conf.
据此设计了一种带减摩槽的三维槽型刀片,并通过切削试验证明了减摩槽能有效减小主切削力并改善刀片断屑性能。
2.
Based on it,two new types of three dimensional chip-breaking grooves with friction-decreasing grooves are designed,and the conclusion that the friction-reducing grooves can reduce the main cutting force and improve the chip-breaking performance of cutter is confirmed by cutting test and cutting resistance of check.
据此,设计了两种带减摩槽的三维槽型刀片,并通过切削试验、切削力检测验证了减摩槽能有效减小主切削力并改善刀片槽型断屑性能的结论。
2) antifriction
[英][,ænti'frikʃən] [美][,æntɪ'frɪkʃən]
减摩
1.
Nano composite coatings of wear resistance and antifriction were fabricated by electrical brushing containing nano-particles Al_2O_3 and PTFE.
分析了将纳米三氧化二铝(Al2O3)和聚四氟乙烯(PTFE)颗粒加入常规电刷镀液中制备纳米耐磨和减摩复合镀层的组织、显微硬度、耐磨性和摩擦因数。
2.
The antifriction and antiwear mechanisms of different low molecular weight liquid crystal were illustrated.
比较了不同小分子液晶润滑剂或添加剂的润滑机理和减摩抗磨性能的差异 ;总结和分析了大分子液晶微观和宏观增强复合材料的摩擦磨损机理和性能 ;并对液晶摩擦学今后的研究和发展方向提出了展
3) reducing friction
减摩
1.
The comparative study of properties between Pb-Sn coatings and some conventional aeronautical lubricating and reducing friction coatings had been performed in this paper.
减摩涂层是降低航空发动机零件磨损的有效手段之一,为此,制备了铅锡合金镀层,并通过摩擦磨损仪、盐雾试验、金相显微观察和镀层结合力测试等手段,对所研究的铅锡合金减摩镀层与几种常用航空润滑减摩镀层的摩擦磨损性能进行了对比研究。
2.
Then, improving measures about instrument pipe, air-power coming out of earth, reducing friction were emphasized.
着重介绍了对切土头、气压出土、减摩等工艺的技术改进措施。
4) anti-friction
减摩
1.
Preparation of Scuffing Resistance Anti-friction Material for Bolt at High Temperature;
螺栓抗咬死减摩防锈材料的研制
2.
Bearing capacity and anti-friction behavior of ultrasonic vibration bearing;
超声波悬浮推力轴承承载能力及减摩性能
3.
Anti-friction and Wear Resistance Mechanism of FeS Layer;
FeS层的减摩耐磨机理
5) friction-reducing
减摩
1.
The effect of four types of repairing accelerants on friction-reducing and self-repairing of TiO_2/SiO_2 nano-additive were studied in Kunlun vehicle gear lubricant,the mechanism was analyzed.
在昆仑牌GL-5车辆齿轮油中研究了4种修复促进剂对TiO2/SiO2纳米添加剂减摩及修复效果的影响,并分析其作用机制。
2.
Several new-type of high temperature resin matrix antifriction-reducing composites and nano-solid lubricants at home and abroad in recent years was surveged.
综述了近年来国内外几种新型耐高温树脂基减摩复合材料和几种新型纳米固体润滑剂 ,介绍了它们的性质、制备方法、应用以及树脂基减摩复合材料的减摩机理 ,分析了耐高温树脂基减摩复合材料存在的问题 ,并提出了今后的发展方向。
3.
Their friction-reducing and antiwear properties under different experimental conditions were introduced.
液晶分子自身独特的低剪切特性使其在摩擦学领域得到了广泛应用,本文主要从溶致液晶、热致液晶两类液晶材料的结构特性出发,介绍了润滑作用机理,列举了几种类型液晶添加剂在各种普通润滑剂和合成油脂中的减摩抗磨效果。
6) friction reduction
减摩
1.
According to the condition of material failure and mechanical equipment breakdown, a kind of tribo-treatment lubricant with excellent antiwear property and friction reduction property was developed based on tribochemical treatment technique.
针对摩擦磨损引起的材料失效和机械设备损坏状况,基于原位摩擦化学处理技术研制了一种抗磨、减摩和润滑性能优异的摩擦处理剂。
2.
The load-carrying capacity, friction reduction and antiwear properties of borate containing the R2NC ( =S ) S-group, added in liquid paraffin under boundary lubrication conditions were evaluated using four-ball machine and HQ -1 ring-on -block tribotester.
用四球机和HQ-1环块实验机考察了一种舍硫代氨基甲酸基团的硼酸酯在液体石蜡中的承载能力、减摩和抗磨性能,并考察了其挽腐蚀性和热稳定性。
3.
The result shows that the lubricant contained "ZY-1"additive represents a function of self-covering layer on the surface of the friction,and that the function in view of friction reduction is superior to that of Shell lubricant.
对研制的无铅基的"ZY-1"添加剂汽车润滑油与美国名牌壳牌润滑油进行了一系列的摩擦性能对比测试,结果表明含"ZY-1"添加剂的润滑油具有在摩擦面上形成自保护层的作用,在减摩方面的性能优于壳牌润滑油,具有广阔的使用前景。
补充资料：电镀减摩合金
分子式：
分子量：
CAS号：
性质：借电化学作用，在金属制件表面上沉积一层锡基或铅基巴氏合金的方法。用于提高轴衬的减摩性、耐摩性、摩合性和抗蚀性，以及修补轴衬的磨损部分。例如电镀铅锡锑合金作为减摩合金时，可将钢铁或铜合金轴瓦等制件作阴极，铅锡锑合金板作阳极，挂入含有氟硼酸铅、氟硼酸锡和氟硼酸锑等成分的电解液中，进行电镀。当电镀铅锡铜合金时，可将轴瓦制件作阴极。铅锡铜合金板作阳极，挂入以氢氟酸、硼酸、氧化铅、硫酸锡和氧化铅所配成的电镀液中，进行电镀。
分子量：
CAS号：
性质：借电化学作用，在金属制件表面上沉积一层锡基或铅基巴氏合金的方法。用于提高轴衬的减摩性、耐摩性、摩合性和抗蚀性，以及修补轴衬的磨损部分。例如电镀铅锡锑合金作为减摩合金时，可将钢铁或铜合金轴瓦等制件作阴极，铅锡锑合金板作阳极，挂入含有氟硼酸铅、氟硼酸锡和氟硼酸锑等成分的电解液中，进行电镀。当电镀铅锡铜合金时，可将轴瓦制件作阴极。铅锡铜合金板作阳极，挂入以氢氟酸、硼酸、氧化铅、硫酸锡和氧化铅所配成的电镀液中，进行电镀。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条