2) HVOF
超音速火焰喷涂
1.
Research on the slurry erosion resistance of coating produced by HVOF;
超音速火焰喷涂涂层耐泥浆冲蚀性研究
2.
Study of Properties of Conventional and Nanostructured WC-12Co Coatings Deposited by HVOF;
超音速火焰喷涂微米和纳米结构WC-12Co涂层及其性能
3.
Effect of HVOF spraying parameters on properties of WC-Co coating;
超音速火焰喷涂参数对WC-Co涂层性能的影响
3) high velocity oxy-fuel spraying
超音速火焰喷涂
1.
WC-Co coating were prepared on 45 steel substrate by means of high velocity oxy-fuel spraying(HVOF).
利用超音速火焰喷涂(HVOF)工艺制备了WC-Co涂层,测定了涂层孔隙率、显微硬度及干摩擦磨损过程中涂层材料失重,得出涂层干摩擦因数随时间的变化关系,分析了涂层摩擦磨损机制。
2.
WC-Co and NiCr-Cr2C3 coatings were prepared on 45 steel substrate by means of high velocity oxy-fuel spraying(HVOF).
采用超音速火焰喷涂(HVOF)工艺制备了WC-Co和NiCr-Cr2C3涂层,测定了涂层孔隙率、显微硬度及油润滑下摩擦磨损过程中涂层材料失重,得出涂层摩擦系数随时间的变化关系,分析了涂层摩擦磨损机理。
3.
Nanostructured and microstructured WC/12Co coatings were prepared by high velocity oxy-fuel spraying.
采用超音速火焰喷涂工艺分别制备了纳米结构和微米结构的WC/12Co涂层。
4) high velocity oxygen fuel spraying
超音速火焰喷涂
1.
Study of reactive high velocity oxygen fuel spraying for Ti-Ni-C coatings;
Ti-Ni-C系反应超音速火焰喷涂合成研究
2.
Nickel-based alloy(Ni60) self-lubricating composite coatings containing Ni-coated MoS2 and Ni-coated graphite as the compounded lubricants were prepared on steel substrate by high velocity oxygen fuel spraying.
以Ni60为基体粉末,Ni包MoS2和Ni包C(石墨)为复合自润滑粉末,以均匀设计方法设计喷涂粉末配比,采用超音速火焰喷涂技术制备涂层,测试了涂层的抗拉结合强度、摩擦系数和磨损失重,并对涂层的结合强度、摩擦系数和磨损失重进行了回归分析。
5) High velocity oxygen fuel spray
超音速火焰喷涂
1.
Microstructure and property of reactive high velocity oxygen fuel spraying TiC-TiB_2-Ni coatings
反应超音速火焰喷涂TiC-TiB_2-Ni涂层的组织性能
2.
The application of the high velocity oxygen fuel spray on the metal seated ball valve;
介绍了超音速火焰喷涂装置的结构组成和工作原理,论述了喷涂零件处理方法和应用效果。
6) high velocity Oxy-Fuel
超音速火焰喷涂
1.
Study on the Enhancement of Bongding Strength for High Velocity Oxy-Fuel Sprayed Cermet Coating;
超音速火焰喷涂金属陶瓷涂层结合强度强化方法的研究
2.
Two kinds of thermal barrier coatings with NiCoCrAlY bond coatings deposited by electron beam-physical vapor deposition(EB-PVD) and high velocity oxy-fuel thermal spraying(HVOF),respectively,as well as 8wt%Y2O3-ZrO2 ceramic layers deposited in one batch by EB-PVD were prepared on near-α titanium alloys.
在TC11钛合金上制备两种以NiCoCrAlY为粘结层,8wt%Y2O3-ZrO2(YSZ)为陶瓷层的热障涂层,粘结层制备技术分别为电子束物理气相沉积(EB-PVD)和超音速火焰喷涂(HVOF),陶瓷层由EB-PVD同炉沉积。
3.
Fe-based amorphous alloy coatings were successfully prepared by high velocity oxy-fuel(HVOF) thermal spraying process on the surface of Cr18Ni9Ti stainless steel.
利用超音速火焰喷涂(HVOF)技术,在Cr18 Ni9 Ti不锈钢基体上成功制备了Fe基非晶合金涂层。
补充资料：反应超电势
分子式：
CAS号：
性质：在电极反应的迁越步骤前后，往往有一些化学反应发生，称为偶联化学反应。若其速率较小而使电极电势发生额外的偏离，这就是反应超电势。例如氢离子在铂上还原的阴极反应中，吸附的氢原子复合成氢分子这一步骤较慢，即引起反应超电势。
CAS号：
性质：在电极反应的迁越步骤前后，往往有一些化学反应发生，称为偶联化学反应。若其速率较小而使电极电势发生额外的偏离，这就是反应超电势。例如氢离子在铂上还原的阴极反应中，吸附的氢原子复合成氢分子这一步骤较慢，即引起反应超电势。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条