抗冲蚀性,washout resistance,在线英语词典,英文翻译,专业英语

1) washout resistance

抗冲蚀性

2) erosion resistance

抗冲蚀性能

3) erosion resistance

耐磨抗冲蚀性能

It was found that ZrN coating is mainly composed of(111) preferred orientation of ZrN phase;ZrN coating does not effect the corrosion and fatigue performance of TC11 titanium alloy,but demonstrates marked improvement in erosion resistance.

采用真空多弧镀设备在TC11钛合金表面沉积超硬耐磨ZrN防护涂层,通过增压气流固体颗粒冲蚀实验评价ZrN涂层的耐磨抗冲蚀性能,划痕仪测试涂层与基体的结合力,SEM、X射线分析涂层组成及观察涂层冲蚀前后表面形貌,盐雾及电化学实验测试涂层耐腐蚀性能。

4) impact

抗冲

Development of impact propylene copolymer with high melt flowability;

高流动抗冲共聚聚丙烯开发进展

Homogeneous design of experimentation was applied to gaseous copolymerization of ethylene-propylene over spherical Ziegler-Natta catalyst to prepare ethylene-propylene impact copolymer.

运用均匀设计法对乙烯-丙烯气相共聚进行实验设计,将反应条件与聚丙烯乙丙抗冲共聚物(简称共聚物)的组成进行关联。

Flame-retardant ABS toughened by the impact modifier and CPE for specially-used engineering plastics was prepared from ABS757 matrix and BA-59P/Sb 2O 3 with the addition of the high-efficiently synergistic flame retardant system,and its retardant property was examined.

以丙烯腈、丁二烯、苯乙烯三元共聚物ABS 757为基体树脂 ,通过添加高效阻燃复合体系 ,研究了这一体系的阻燃性能 ,同时研究了采用抗冲击改性剂与氯化聚乙烯 (CPE)复合增韧阻燃ABS体系的增韧效果 ,制备了阻燃ABS有色工程塑料。

5) impact modification

抗冲改性

The molecular composition and molecular structure of MBS,CPE and ACR,which were used as the impact modifier of PVC,were analyzed,and their impact modification mechanism were studied as well as their influences on the low temperature impact strength,weather resistence,Vicat softening point and toughness of PVC products.

对PVC冲击改性剂——MBS、CPE和ACR的分子组成和分子结构进行了分析,研究了其抗冲改性机理及对PVC制品低温冲击强度、耐候性、维卡软化点、韧性的影响。

6) impact work

抗冲击功

参考词条

高抗冲抗冲金抗冲击值抗冲破坏抗冲系数抗冲磨性抗冲耐磨高抗冲性长程脑电图 Win9x保护环

补充资料：抗蚀性

分子式：
CAS号：

性质：在成像(或光刻)的图形区域中，光掩模涂层或防护材料(如光致抗蚀剂)的抗腐蚀能力。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引抗冲共聚抗冲击抗冲元件抗冲强度抗冲级SMA 抗冲击性

1) washout resistance 抗冲蚀性 2) erosion resistance 抗冲蚀性能 3) erosion resistance 耐磨抗冲蚀性能 1. It was found that ZrN coating is mainly composed of(111) preferred orientation of ZrN phase;ZrN coating does not effect the corrosion and fatigue performance of TC11 titanium alloy,but demonstrates marked improvement in erosion resistance. 采用真空多弧镀设备在TC11钛合金表面沉积超硬耐磨ZrN防护涂层,通过增压气流固体颗粒冲蚀实验评价ZrN涂层的耐磨抗冲蚀性能,划痕仪测试涂层与基体的结合力,SEM、X射线分析涂层组成及观察涂层冲蚀前后表面形貌,盐雾及电化学实验测试涂层耐腐蚀性能。 4) impact 抗冲 1. Development of impact propylene copolymer with high melt flowability; 高流动抗冲共聚聚丙烯开发进展 2. Homogeneous design of experimentation was applied to gaseous copolymerization of ethylene-propylene over spherical Ziegler-Natta catalyst to prepare ethylene-propylene impact copolymer. 运用均匀设计法对乙烯-丙烯气相共聚进行实验设计,将反应条件与聚丙烯乙丙抗冲共聚物(简称共聚物)的组成进行关联。 3. Flame-retardant ABS toughened by the impact modifier and CPE for specially-used engineering plastics was prepared from ABS757 matrix and BA-59P/Sb 2O 3 with the addition of the high-efficiently synergistic flame retardant system,and its retardant property was examined. 以丙烯腈、丁二烯、苯乙烯三元共聚物ABS 757为基体树脂 ,通过添加高效阻燃复合体系 ,研究了这一体系的阻燃性能 ,同时研究了采用抗冲击改性剂与氯化聚乙烯 (CPE)复合增韧阻燃ABS体系的增韧效果 ,制备了阻燃ABS有色工程塑料。 5) impact modification 抗冲改性 1. The molecular composition and molecular structure of MBS,CPE and ACR,which were used as the impact modifier of PVC,were analyzed,and their impact modification mechanism were studied as well as their influences on the low temperature impact strength,weather resistence,Vicat softening point and toughness of PVC products. 对PVC冲击改性剂——MBS、CPE和ACR的分子组成和分子结构进行了分析,研究了其抗冲改性机理及对PVC制品低温冲击强度、耐候性、维卡软化点、韧性的影响。 6) impact work 抗冲击功参考词条高抗冲抗冲金抗冲击值抗冲破坏抗冲系数抗冲磨性抗冲耐磨高抗冲性长程脑电图 Win9x保护环补充资料：抗蚀性分子式： CAS号：性质：在成像(或光刻)的图形区域中，光掩模涂层或防护材料(如光致抗蚀剂)的抗腐蚀能力。说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com