1) coating and cladding
涂布包裹
1.
The coating and cladding technology for nitrogen increasing of Sbased compound fertilizer or for sulfur coating of ureabased compound fertilizer, the drum coating and cladding machine, and the fast ur.
分析我国控释和缓释肥料研制的现状和进展,重点介绍上海化工研究院开发的涂布包裹技术,及该技术用于硫基复肥增氮或尿基复肥包硫的实施情况,还介绍了开发的转鼓涂布包裹机、尿素快速熔融器等专用设备情况,指出涂布包裹技术进一步工业实施应注意的问题和方向。
2) drum coating and cladding machine
转鼓涂布包裹机
1.
The coating and cladding technology for nitrogen increasing of Sbased compound fertilizer or for sulfur coating of ureabased compound fertilizer, the drum coating and cladding machine, and the fast ur.
分析我国控释和缓释肥料研制的现状和进展,重点介绍上海化工研究院开发的涂布包裹技术,及该技术用于硫基复肥增氮或尿基复肥包硫的实施情况,还介绍了开发的转鼓涂布包裹机、尿素快速熔融器等专用设备情况,指出涂布包裹技术进一步工业实施应注意的问题和方向。
3) oil coating process
包裹油涂层技术
4) encapsulation
[英][in,kæpsju'leiʃən] [美][ɪn,kæpsə'leʃən]
包裹
1.
NanoSolve-a new type of technique for the encapsulation of lipophilic actives;
NanoSolve——一种包裹亲油性活性物的新技术
2.
Modified hyperbranched and linear polyethylenimine (PEI) as nano-sized inverted micelles for the encapsulation and release of polar guest molecules was comparatively studied.
本论文对比性地研究了改性后的超支化及线性聚乙烯亚胺(PEI)作为反相纳米胶束对极性客体分子的包裹及释放行为。
3.
The effect of paraffin oil content,emulsifier content,and the content of the first phase on the stability of paraffin oil W/O/W multiple emulsion was studied by determining the encapsulation of Vitamin-C.
选用低温稳定性较好的W/O/W型多重乳液包裹易被氧化的维生素C。
5) enwrap
[英][in'ræp] [美][ɪn'ræp]
包裹
1.
The choice of surfactant and the conditions of enwrapping on preparation of magnetic fluid;
磁流体制备中表面活性剂的选择及其包裹条件的影响
2.
The XRD spectra,FT-IR spectra and magnetic characteristic show that the enwrapping of Co_3O_4() .
X-射线衍射(XRD)、红外光谱(IR)及磁性能测定表明,聚苯乙烯对Co3O4纳米粒子的包裹是成功的。
6) coating
[英]['kəʊtɪŋ] [美]['kotɪŋ]
包裹
1.
Studies on Preparation of PbNb_2O_6 Micropowder by Liquid-Phase Coating on Solid Particles Method;
液相颗粒包裹法制备PbNb_2O_6微粉的研究
2.
Investigation on Properties of Al_2O_3 / Cu Composite Prepared by Liquid-coating and Hot-pressing Method;
包裹和热压制备Al_2O_3/Cu复合材料及性能研究
3.
Cu coated SiC composite powders were made by the heterogeneous precipitation coating method and the hot pressing process was used to prepare SiCp/Cu composites with 20%-65%SiC particles.
采用非均相沉淀包裹法制得铜包SiC复合粉体,利用热压烧结工艺制备了含有体积分数为20%~65%SiC颗粒的SiCp/Cu复合材料。
补充资料：凹印辊涂布机
分子式：
CAS号：
性质：全称辊式涂布机。即用一组以上的回转辊筒把一定量的涂料涂布到平面状材料上的装置。改变两辊之间的压力，可调节涂布的厚度。典型的辊涂机有辊舐涂布机，压辊涂布机(凹印辊涂布机)，正、反辊式涂布机等。此外用小直径涂布辊代替涂布刮刀的涂布机亦称辊涂机。
CAS号：
性质：全称辊式涂布机。即用一组以上的回转辊筒把一定量的涂料涂布到平面状材料上的装置。改变两辊之间的压力，可调节涂布的厚度。典型的辊涂机有辊舐涂布机，压辊涂布机(凹印辊涂布机)，正、反辊式涂布机等。此外用小直径涂布辊代替涂布刮刀的涂布机亦称辊涂机。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条