1) spark plasma sintering(SPS)
脉冲放电等离子烧结
2) spark plasma sintering(SPS)
放电等离子烧结
1.
0Cr were prepared by spark plasma sintering(SPS).
0Cr合金粉末为原料,研究了采用放电等离子烧结工艺制备Ti-A l基合金。
2.
The silicon carbide ceramic was prepared by Spark Plasma Sintering(SPS).
本文用放电等离子烧结(SPS)的方法制备了SiC陶瓷,研究了SPS烧结温度、压力和保温时间对烧结试样力学性能的影响。
3.
Using Si3N4-AlN-Al2O3-Y2O3 ceramic system as binding,polycrystalline cubic boron nitride(PcBN) was prepared by spark plasma sintering(SPS).
采用放电等离子烧结工艺(spark plasma sintering,简称SPS)在氮气气氛中制备了以Si3N4-AlN-Al2O3-Y2O3系为基的立方氮化硼聚晶(polycrystalline cubic boron nitride,简称PcBN)。
3) SPS
放电等离子烧结
1.
Heat treatment and magnetic properties of ferromagnetic bulk glassy alloy prepared by SPS;
放电等离子烧结铁磁性大块非晶的晶化处理及其磁性能研究
2.
STUDY ON CARBON POLLUTION AND DECARBONIZATION PROCESS OF SPSED BaTiO_3 CERAMICS;
放电等离子烧结钛酸钡陶瓷的碳污染及脱碳工艺研究
3.
Nd_2Fe_(14)B/α-Fe Nanocomposite Magnets Prepared by Sonochemistry-SPS Process;
超声化学-放电等离子烧结制备Nd_2Fe_(14)B/α-Fe双相复合磁体
4) spark plasma sintering
放电等离子烧结
1.
Influence of sintering parameters on carbonyl iron powder prepared by spark plasma sintering;
烧结参数对羰基铁粉放电等离子烧结的影响
2.
Study on microstructure and oxidation characteristics of TiAl alloy prepared by spark plasma sintering;
放电等离子烧结的钛铝合金组织及氧化性能研究
3.
Microstructure of a bulk nanocrystalline Al-Zn-Mg-Cu alloy prepared by cryomilling and spark plasma sintering;
放电等离子烧结制备Al-Zn-Mg-Cu纳米晶合金的组织
5) spark plasma sintering (SPS)
放电等离子烧结
1.
Study of Dental Materials Prepared by Spark Plasma Sintering (SPS);
放电等离子烧结（SPS）技术制备牙科材料的研究
2.
0Cr were prepared by spark plasma sintering (SPS), and the relationship among sintering temperature, microstructure and mechanical properties was studied.
0Cr合金粉末为原料,采用放电等离子烧结工艺制备出TiAl基合金,并研究了制备工艺、显微组织与室温力学性能三者的关系。
3.
The synthesized powders were sintered by pressureless sintering technique in a graphite furnace with a flowing nitrogen atmosphere and by spark plasma sintering (SPS) technique respectively.
利用低温燃烧合成前驱物制备出平均粒度为100 nm的AlN陶瓷粉末,比较了该粉末的常压烧结和放电等离子烧结的特性。
6) pulsed discharge plasma
脉冲放电等离子体
1.
Study on electron temperature of pulsed discharge plasma;
大气脉冲放电等离子体电子温度的研究
2.
In order to realize the degradation of biorefractory organic compounds in aqueous solutions and to develop some new techniques for wastewater treatment,a multi-needle-to-plate high voltage pulsed discharge plasma system was established in the paper.
为了满足有机物难生化降解的特殊处理要求,研究建立了多针-板电极形式的高压脉冲放电等离子体体系,以苯酚作目标物,考察该体系中影响苯酚降解的因素并分析了降解产物。
3.
In the paper, xylene was studied as typical VOCs and destructed by pulsed discharge plasma in a wire-coaxial reactor.
本论文选取典型VOCs物质二甲苯为研究对象,采用脉冲放电等离子体方法进行了处理,设计研制了一套线-筒式等离子体气体处理装置,分别研究了峰值电压、反应物浓度、停留时间、催化剂对去除率的影响,比较了单个反应器和两个同类反应器串联使用的处理效果,并就反应产物进行分析了。
补充资料：电容放电脉冲加热法
分子式：
CAS号：
性质：提高原子吸收石墨炉升温速率的方法。以电容放电供电方式，对石墨管原子化器供给瞬间大电流，进行脉冲加热，实现快速升温(100K/ms)。用各向异性热解石墨管产生等温条件。保证试样迅速原子化的技术。
CAS号：
性质：提高原子吸收石墨炉升温速率的方法。以电容放电供电方式，对石墨管原子化器供给瞬间大电流，进行脉冲加热，实现快速升温(100K/ms)。用各向异性热解石墨管产生等温条件。保证试样迅速原子化的技术。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条