1) stainless steel stent
不锈钢支架
1.
Influence of different controlling methods on release property of paclitaxel from stainless steel stent surface;
不同调控方法对不锈钢支架表面紫杉醇释放性能的影响
2.
Fiber laser precision cutting of stainless steel stent of high linear density
光纤激光精密切割高线密度不锈钢支架
3) 316L stainless steel cardiovascular stent
316L不锈钢冠状动脉支架
1.
Development of restenosis of 316L stainless steel cardiovascular stent;
316L不锈钢冠状动脉支架再狭窄研究进展
4) stainless steel insert
不锈钢骨架
1.
Through surface chemical treatment and coating CH-252 adhesive, the stainless steel insert could be cured with NR/SBR compound, and manufactured into the drainage valve rubber seal of beer jar according to quality requirements.
不锈钢骨架经表面化学处理后 ,涂开姆洛克CH2 5 2粘合剂 ,可与天然胶 /丁苯胶配制的胶料硫化成一体 ,制作出符合质量要求的啤酒罐排酒阀橡胶密封
5) stainless steel space trusses
不锈钢网架
1.
Results of analysis of the ultimate load-bearing capacity hy the method given in this paper showed that the stainless steel space trusses could be used in middlet space structures.
由于不锈钢材料没有明显的屈服点，而是由比例变形阶段直接进入强化阶段，本文据此建立了不锈钢压杆的单杆受力模型，利用荷载增量法对网架的极限承载力进行了追踪分析，得到了不锈钢网架的荷载位移曲线，结果表明不锈钢网架用于中小跨度的承重结构是可行的。
6) stainless steel
不锈钢
1.
Vacuum hot roll bonding of TC4 titanium alloy and 0Cr18Ni10Ti stainless steel;
TC4钛合金与0Cr18Ni10Ti不锈钢真空热轧连接
2.
Research on cyclic ion nitriding technology catalyzed by rare earth for 2Cr13 stainless steel;
2Cr13不锈钢的稀土催渗循环离子渗氮工艺研究
3.
Analysis of the components of acid chemical coloring solutions for stainless steel;
不锈钢酸性化学着色液成分的分析方法
补充资料：Z-型支架
Z-型支架
介入放射学器材。Z-型支架属自胀式支架。包括Gianturco-Z-型支架，改良型Gianturco-Rosch 支架，螺旋型Z-支架，可回收式Z-支架。Gianturco-Z支架系不锈钢丝弯成Z形，然后围成圆柱状。支架的直径、长度可以根据需要而制造。一般钢丝的直径0.25～0.5mm，支架体的长度10～35mm，支架的直径5～30mm。制作工艺比较简单。缺点是单体支架容易移位，多体连接支架连接部的张力不够均匀。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条