1) winding tension
卷绕张力
1.
Application of DSP chip in tire cord winding tension control system
DSP芯片在帘子布卷绕张力控制系统中的应用
2.
And the winding effectiveness was improved by controlling winding tension, winding weight, travers frequency, finish application, lateral blowing, etc.
从卷绕成型的原理探讨了影响CKV453纺丝卷绕机卷绕成型的因素,通过调整卷绕张力、卷绕重锤、往复次数、上油及侧吹风等,最终改善了该纺丝机的卷绕成型。
3.
In this paper,the formation of winding tension,contralling properties and the relation between the rotation speed of leady drive motor and winding diameter are introduced.
主要从原理上阐述了粗纱卷绕张力的形成、控制实质及粗纱卷径与主传动电机转速关系 ,并采用变频器S曲线功能和转矩提升功能控制主电机软起动、缓慢停车、稳定运行 ,实现对粗纱卷绕张力的控制 ,解决了粗纱生产质量稳定问
2) permanent tension convolution
恒张力卷绕
1.
The paper proceeds from the mathematical model of permanent tension convolution system.
文章从恒张力卷绕系统的数学模型出发,提出了采用变频器、PLC实现的两种控制方式,具有较高的实用价值,可应用于造纸、纺织、冶金等行业。
3) winding tensility
卷绕恒张力
4) winding tension control
卷绕张力控制
1.
Design of the new winding tension control system in the sizing machine;
浆纱机卷绕张力控制系统的改造
5) Unwinding Tension
退绕张力
1.
Innovation of Unwinding Tension Control Loop of S422 Sizing Machine;
S422型浆纱机退绕张力控制回路的改进
2.
Electronic Determination of Roving Unwinding Tension and Horizontal Position Selection of Guide Rod(Sequel);
粗纱退绕张力的电测及导纱杆水平位置的选择
3.
New auto-control system for unwinding tension of warp sheets from sizing beam in re-beaming machine;
新型并轴机浆轴丝片退绕张力控制系统
6) winding tension
缠绕张力
1.
On the base of the mechanical analysis and mathematical deduction,the formulation of balanced winding tension in non-resin winding is put forward under determinate correlative postulates and application area.
通过力学分析和数学推导,在一定的相关假设和适应范围下,得出了干纱缠绕中均衡缠绕张力的逐层施加公式。
2.
Put forward the application of space joist-frame structure in gypsum core model frame,used the ANSYS software to do the analysis for change when bearing winding tension and inertia force,confirmed its feasibility of mechanics.
将空间桁架结构应用于石膏芯模骨架,并用ANSYS软件分析这种结构在承受缠绕张力和惯性力时的变形情况,以确定其力学可行性。
3.
During the manufacture process of the composite material barrel, residual stresswould be made with the cure temperature and the winding tension.
复合材料身管在加工过程中，由于固化温度、缠绕张力等因素的影响，在身管中产生一定量的残余应力。
补充资料：磁带卷绕机
分子式：
CAS号：
性质：把分切后的大盘磁带按规定长度分卷成小盘的设备叫卷绕机，把分切后的大盘磁带按规定长度直接进行装盒的设备叫磁带装盒机。如盒或带卷绕机、盒式带装盒机，计算机磁带卷绕机和录像带装盒机等。
CAS号：
性质：把分切后的大盘磁带按规定长度分卷成小盘的设备叫卷绕机，把分切后的大盘磁带按规定长度直接进行装盒的设备叫磁带装盒机。如盒或带卷绕机、盒式带装盒机，计算机磁带卷绕机和录像带装盒机等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条