说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 高能复合射孔
1)  high energy composite perforation
高能复合射孔
1.
Application of high energy composite perforation technique to low permeability formations;
高能复合射孔压裂技术在低渗透油藏中的应用
2)  compound perforation
复合射孔
1.
Movement mechanism experiment of top control fluid in compound perforation;
复合射孔上部压井液运动机理试验
2.
By doing some optimizations such as optimizing technology,optimizing the detonator amount of compound perforation,selecting phase angle and improving the pattern of placing holes,a perforatio.
通过优选工艺技术、复合射孔加药量优化、相位角优选、布弹方式改进等措施,提出一套射孔完井技术方案,对提高单井产能具有重要意义。
3.
Deep penetration compound perforation technology joins organically the perforation technology and high-energy gas fracturing technology,which is a new perforation tec.
深穿透复合射孔技术把射孔技术与高能气体压裂技术有机结合,具有改造油层作用的一项新型射孔技术。
3)  composite perforation
复合射孔
1.
Experimental verification of numerical analysis accuracy of composite perforation;
复合射孔数值模拟精度的实验验证
2.
According to the conditions of the bad reservoir physics character of Jilin Yingtuo oilfield,all the new perforated and completed wells must being hydrafrac to increase production and some bottom hole water of them having developed much,producing water after hydrafrac and high exploitation expense,hang composite perforation tech is utilized to be well completion to increase production and effect.
针对吉林英坨油田储层物性普遍较差,所有新井射孔完井后都要进行水力压裂增产,且部分井底水发育良好、水力压裂后出水多、开发费用大等实际情况,优选采用下挂式复合射孔工艺技术进行完井射孔,起到了增产、增效的作用。
3.
built-in style,oversleeve-style,symmetry style and hanging style perforators,a method of optimizing effective composite perforation by correct determining peak value of pressure and amount of gunpowder,under the precondition of operation safety,according to the hole structure and formation damage is proposed.
通过对内置式、袖套式、对称式和下挂式四种不同类型复合射孔器的设计结构、作用原理及安全性对比分析,建议根据不同井身结构、地层污染程度等情况,合理设定峰值压力及火药用量,在确保作业安全前提下,优选高效复合射孔器。
4)  fracture perforating
复合射孔
1.
Application of packer in fracture perforating;
封隔器在复合射孔中的应用
2.
A new projectile-filling device was developed to realize the fracture perforating under the condition of high foramen density.
提出了一种新型装药结构并实现在高孔密条件下的复合射孔,所开发的产品进行了地面混凝土靶测试、地面动态压力-时间(p-t)过程测试和现场应用试验。
3.
During a fracture perforating operation, there are some events of spacer gun flexion.
夹层枪的压扁现象在复合射孔施工作业中会时有发生,压扁程度严重时导致卡枪等事故。
5)  combined perforating
复合射孔
1.
Application of combined perforating technology in Xianhe Wang 541 block;
复合射孔技术在现河王541区块的应用
2.
Based on characteristics and effect parameter of the powder burning, researched were the powder burning characteristics of built-in,suspended and sleeve combined perforating systems.
火药燃烧对地层的作用参数可用于优化复合射孔施工设计,提高复合射孔效果。
3.
The combined perforating technology in horizontal wells is very dangerous because of its thick perforating zones, large quantities of explosives and high risk operation.
水平井复合射孔由于射开厚度大,设计药量多,施工风险高,极易发生安全事故。
6)  Complex perforation
复合射孔
1.
It is of great significance for scientific research and oil application to describe the fracture mechanism process of the rockmass around oil well, driven by detonation gas during the complex perforation.
油井复合射孔二次爆燃气体对地层压裂作用是流固动力耦合、裂缝动态扩展的岩体力学前沿交叉课题,具有重要的科学意义与明确的应用前景。
2.
This paper describes a creative research and practice of a new technique-complex perforation and sand control on solving sand production problem in the oilfield .
本文创造性地研究并实践了一种解决油田生产出砂问题的新技术,即复合射孔防砂技术。
3.
Studied is fracturing charge burning mechanism under the condition of top packer and influence factors of top packer in complex perforation.
对复合射孔过程中上部封挡的压裂火药燃烧特性及其影响因素进行了研究,按照封挡距离位置的不同,把上部封挡分为近作用层位封挡和远离作用层位封挡,根据各自的封挡特点建立了其最大承受压力的计算模型,最后通过1个计算实例对复合射孔过程中的上部封挡进行了进一步的分析。
补充资料:惜别行送刘仆射判官(仆射乃其主将刘乃仆射
【诗文】:
闻道南行市骏马,不限匹数军中须。襄阳幕府天下异,
主将俭省忧艰虞。只收壮健胜铁甲,岂因格斗求龙驹。
而今西北自反胡,骐驎荡尽一匹无。龙媒真种在帝都,
子孙永落西南隅。向非戎事备征伐,君肯辛苦越江湖。
江湖凡马多憔悴,衣冠往往乘蹇驴。梁公富贵于身疏,
号令明白人安居。俸钱时散士子尽,府库不为骄豪虚。
以兹报主寸心赤,气却西戎回北狄。罗网群马籍马多,
气在驱驰出金帛。刘侯奉使光推择,滔滔才略沧溟窄。
杜陵老翁秋系船,扶病相识长沙驿。强梳白发提胡卢,
手把菊花路旁摘。九州兵革浩茫茫,三叹聚散临重阳。
当杯对客忍流涕,君不觉老夫神内伤。



【注释】:



【出处】:
全唐诗:卷234_12
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条