1) PVC pipe
PVC管
1.
The author suggests that it may use in PVC pipes.
较详细地介绍了有机锑(主要是硫醇锑)热稳定剂的表征及应用范围,同时还介绍了它与其他热稳定剂并用时的效果及用作PVC热稳定剂时的常用配方,建议今后在PVC管材中使用。
2.
Some quality problems occur in PP-R and PVC pipes construction because the material property is not well enough and the connecting technique is uneasy to control.
由于PP-R和PVC管材本身特性不理想,加之施工中的连接工艺普遍不规范并难以掌握,导致一些工程质量问题的发生,因此,文中建议对这两类管材的施工质量应该严格控制,同时还应逐步限制使用。
3.
Described in this article is the design and application of PVC pipes in municipal drainage works.
介绍PVC管在市政排水工程中的设计应
2) PVC tube
PVC管
1.
Application of subsurface drip irrigation with PVC tube to tomatoes in greenhouse;
PVC管地下滴灌系统在温室番茄灌溉中的应用研究
3) PVC pipe
PVC管材
1.
Aimed at the disadvantage existed in the bulging terminals forming mold of,φ400mmPVC pipe material, φ400mm PVC mold with eight sliding blocks is designed, this mold has high precision measure, stable performance and low manufacture cost, the application in actual practice has shown good results.
针对原有!400mmPVC管材的胀口成型模具的不足,设计了八滑块结构的!400mmPVC胀口模具,该模具尺寸精度高,性能稳定且制作成本低,在实际生产中取得了理想的应用效果。
2.
A bulging die with8sliding blocks for BSφ400PVC pipe was developed.
针对原400PVC管材胀口成型模的不足,设计了1副八滑块结构的胀口模,并介绍了模具的结构特点及主要零件设计。
3.
PVC pipe、PVC leather、PVC planking and PVC ornament etc.
综述近十余年来国内各种PVC材料粘接的研究进展,分类介绍PVC膜、PVC管材,PVC革、PVC板材和PVC装饰材料等所用胶粘剂的概况,讨论了各种材料所适用的胶粘剂种类,并通过剥离强度,粘接强度等主要性能指标分析了各胶粘剂的主要性能。
4) PVC-U pipe
PVC-U管材
1.
Characteristics of PVC-U pipe and its application in wastewater treatment;
PVC-U管材的特性及其在污水处理中的应用
2.
The formulation design, technical process and technical control of the procedures in the production of fishery float by use of PVC-U pipe wastes are introduced.
介绍以PVC-U管材洗机料生产渔用浮标的配方设计、工艺流程及各工序的工艺控制。
3.
The operating principle, design philosophy, determination of the main design parameters, structure characteristics and the key parts of the extrusion mould for PVC-U pipes were analyzed theoretically.
对PVC-U管材挤出成型模具工作原理、设计原则、主要设计参数的确定、结构特点及关键部件进行了理论分析,并结合生产中取得的经验数据加以改进。
6) PVC-U pipe fitting
PVC-U管件
1.
Counter some hard nuts such as the flowing dapples and bedding on the product surface existing in the molding of the plastics parts, the optimum design of the runner of the injection mold for PVC-U pipe fittings is carried out.
针对3种类型PVC-U管件注塑模具的常用浇注系统在管件成型中经常出现的产品表面及浇口周围存在流动斑纹、分层等难以解决的问题,对PVC-U管件注塑模具浇注系统进行了优化设计。
补充资料：管山吃山﹐管水吃水
1.比喻干什么事情﹐就靠什么生活。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条