说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 塑性滞回能
1)  Plastic hysteresis energy
塑性滞回能
1.
In this paper, the crack initiation life es-timate equation is deduced by using the fatigue damagecontinuous curve with the basis of experimental data ob-tained from the crack initiation plastic hysteresis energyas a control parameter.
以萌生阶段中塑性滞回能作为控制参量,根据实验数据拟合出疲劳损伤的连续曲线,得到裂纹萌生寿命估算公式。
2)  the plastic-loop
塑性滞回环
1.
The deformation characteristics and the plastic-loop of the fine-sandstone is studied under the loading and(unloading) condition at the three different deformation-rates and the two different stress-levels,the results show: 1) There is really the plastic-loop in the deformation curve for the loading deformation curve is different form the unloading deformation curve.
通过对循环载荷条件下细粒砂岩在不同载荷水平、不同位移速率时的变形特性及其塑性滞回环演化规律的分析发现:1)循环载荷条件下岩石的加、卸载曲线不重合,将形成一封闭的塑性滞回环,该塑性滞回环从第2循环起将趋于稳定;2)不同载荷水平和不同位移速率下第1循环时的各拟合参数值与第2循环相比存在有较大变化,但从第2循环曲线起,各拟合参数均将逐渐趋于恒定;3)随着位移速率和载荷水平的变化,其拟合参数将随之而发生变化;4)在相同位移速率和相同载荷水平条件下,同一次循环时岩石变形曲线的加载段与卸载段的相应拟合参数值不同。
2.
The experimental results show that there is really the plastic-loop in the deformation curve for the loading deformation curve is different from the unloading deformation curve.
通过对细粒砂岩在不同位移速率、不同载荷水平时循环加、卸载条件下变形的演化规律的实验研究发现,细粒砂岩在循环加、卸载条件下的卸载曲线与加载曲线不相重合,将形成一封闭的塑性滞回环,且该塑性滞回环从第2次循环起几乎不发生变化。
3)  hysteretic behavior
滞回性能
1.
Investigation on hysteretic behavior of concrete-filled steel tubular frame by finite element method;
有限元法研究钢管混凝土框架的滞回性能
2.
Experimental investigation of hysteretic behavior of different semi-rigid connections in steel framed beam and pillar;
钢框架不同型式梁柱半刚性节点滞回性能试验研究
3.
Load-displacement hysteretic behavior of concrete filled CHS columns after exposure to ISO-834 standard fire;
火灾作用后圆钢管混凝土柱荷载-位移滞回性能研究
4)  hysteresis behavior
滞回性能
1.
The test of the specimen was conducted under lateral cyclic loading to study the hysteresis behavior of SRC.
目前我国规范关于钢框架-内填RC剪力墙组合结构体系(SRCW)的有关内容基本空白,通过了解国际上在SRCW结构体系研究领域的发展状况,以尚未研究的半刚连接钢框架(柱弱轴)-RC剪力墙结构为研究对象,通过1∶3比例将原结构缩放为一两层单跨试件结构,进行了水平循环荷载下的滞回性能试验。
2.
To investigate the hysteresis behavior of composite steel frame with PR connection-reinforced concrete infill wall structural systems, a nonlinear finite element program SRCWNP was developed.
为了系统研究半刚接钢框架-RC剪力墙结构的滞回性能,编制了非线性有限元程序SRCWNP。
3.
Three centrically braced frames filled with foamed aluminum subjected to reversed cyclic load are tested in the paper with the purpose of researching their hysteresis behavior.
对3榀中心支撑框架进行了滞回性能研究,其中2榀框架的支撑部分填充了泡沫铝材料,主要考察支撑填充泡沫铝后对框架整体滞回性能的影响。
5)  hysteretic performance
滞回性能
1.
The hysteretic performance analysis of X typed mild steel shock damper
X形软钢阻尼器的滞回性能分析
2.
The lateral resistant ability under three kinds of vertical loads and the hysteretic performance under cyclic loading are analyzed and contrasted for four steel frames,six steel plates shear wall piece with slits(two rows) and six steel frames-steel plate shear wall with slits.
本文对4种钢框架、6种带缝(两排)钢板剪力墙片(四周与构件无连接)和6种固接的钢框架-带缝钢板剪力墙结构在3种不同竖向荷载作用下的抗侧能力和往复荷载下的滞回性能进行了研究,并对比分析。
3.
Pseudo - static test including four pieces of panel type of diagonal - shaped buckling - restrain- ed brace(DBRB) has been carried out to investigate the hysteretic performance,in which the effects of different width to thickness ratio of steel plate brace,edge reinforcement of panel,reinforcement ratio of panel and the unbonded materials are considered.
通过对两组共四块单斜式无粘结内藏钢板支撑剪力墙的拟静力试验研究,考察了内藏钢板支撑的宽厚比、墙板端部加强方式、墙板内纵横向钢筋网的配筋率和无粘结材料的变化对单斜支撑墙板滞回性能的影响。
6)  hysteretic behaviors
滞回性能
1.
The theoretical model proves to be valid by comparing the calculating results and the test results on the experimental components,followed by in-depth study on CFST arches hysteretic behaviors of vertical moment-curvature,longitudinal load-displacement and transverse load-disp.
首先对试验构件进行计算,与试验结果吻合较好,然后深入研究钢管混凝土拱肋竖向弯矩-曲率、纵桥向荷载-位移以及横桥向荷载-位移滞回关系,从中看出钢管混凝土拱肋具有良好的延性和吸能性质,并得出拱肋滞回性能的各种影响因素。
补充资料:磁滞回线
      图示强磁物质磁滞现象的曲线。它反映这类物质的磁通密度或磁化强度与磁场强度的关系。
  
  当一种强磁物质的磁性状态改变时,磁化强度滞后于磁场强度,这种现象称为磁滞。
  
  在原处于磁中性状态的强磁物质中施加外磁场,它就被磁化。随着外磁场强度H 的逐渐增大,物质中的磁化强度J将沿起始磁化曲线a增大,当磁化强度增大到Js以后,H 继续增加,磁化强度就不再增加了,这种状态称为磁饱和。上述过程如图中曲线 Oab段所表示。
  
  如果强磁材料饱和后,使磁场强度从大于Hs的值逐渐减小至零,磁化强度随之减小至Jr,磁化状态由图中的b点转移到c点。当磁场强度由零逐渐变至-Hs时,J由Jr减小,最后达到反向饱和值-Js,磁化状态由图中的c点沿cde段磁化曲线达到e点。此后当使H由-Hs变至Hs时,磁化强度由-Js变至Js,磁化状态如图中的e点沿efgb回到b点。在以上过程中,J-H 平面上表示磁化状态的点的轨迹形成一个对原点对称的回线,称为饱和磁滞回线。
  
  饱和磁滞回线上H=0时,J 的值(即其在J 轴的截距的大小)称为剩余磁化强度Jr,也就是剩余磁通密度Br;在J=0时, H 的值(即其在H 轴的截距的大小)称为关于磁化强度的矫顽力HCJ;在B=0时, H 的值称为关于磁通密度的矫顽力HCB。根据磁滞回线可以由HCJ,HCB中的任一个求出另一个。一般HCJ≥HCB。对有理想矩形磁滞回线的材料HCJ=HCB
  
  如果磁场强度在±Hm间缓慢变化,Hm<Hs,则对应每-Hm值,经多次反复磁化后,磁化状态沿一条不饱和的对称的磁滞回线进行。这样便可在不同的Hm值下测得一族磁滞回线。 Hm愈小的磁滞回线,其剩磁和矫顽力也愈小。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条