1) EBR polymerizer
EBR聚合釜
1.
Waste water treatment of EBR polymerizer and grafting reactor in ABS equipment;
ABS装置EBR聚合釜和接枝釜工艺废水处理技术研究
2.
The results showed that by reclaiming and reusing the waste water of EBR polymerizer and grafting reactor,the overall COD decreased 20% and the amount of waste water decrease.
试验结果表明,采用对EBR聚合釜洗釜水和ABS接枝釜洗釜水回用的清洁生产方法,在生产工艺条件和产品质量不受影响的情况下,可回收废水中的有用物料,减少装置废水排放量,使废水总COD值下降 20%。
2) polymerizer
聚合釜
1.
The application of high-pressure water fluidics in the cleaning of polymerizer;
高压水射流技术在清洗聚合釜中的应用
2.
The control of temperature during the warming up of polymerizer;
聚合釜升温过程中温度的控制
3.
Influences of different samples on the examination results of tensile strength of polymerizer head;
不同试样对聚合釜封头拉伸性能检测结果的影响
3) 30m3 polymerizer
30m3聚合釜
1.
The process of SG-8 resin production by 30m3 polymerizer were introduced.
介绍了采用30m3聚合釜生产SG-8型PVC树脂的工艺特点,分析了影响聚合釜生产能力的因素。
2.
According to the characteristics of volume shrinkage constantly in suspension polymerization of vinyl chloride monomer, the process of continuous water injection in midway of polymerization was developed, and it was used in 30m3 polymerizer, and got lots of benefits, such as reducing energy consumption, increase in batch yield and economic benefits.
介绍了利用氯乙烯单体在悬浮聚合反应过程中体积不断收缩的特点,开发的聚合反应中途连续注水工艺,将其应用于30m3聚合釜,降低了消耗、提高了单釜产量和经济效益。
4) polymerization kettle
聚合釜
1.
Based on the features of PVC polymerizayion kettle in Taiyuan Chemical Company Group and its requirements to temperature,the combination control methods to program control,cascade control and follow up control were adopted to control the temperature of polymerization kettle and gained satisfied effect.
针对PVC聚合釜的特点及其对温度控制的要求,采用程序控制、串级控制、随动控制等多种控制方式相结合的组合控制手段对聚合釜的温度进行控制,取得了令人满意的效果。
2.
The influence factors of heat on the top of condenser with its temperature, fluctuate and disability for the first polymerization kettle in polypropylene plant and the cause of temperature control run away were analyzed .
分析了扬子石油化工公司聚丙烯装置的第一聚合釜飞温、波动、失控的影响因素,提出了相应整改措施。
3.
In this short paper the actual information of polyproplene production in the plastic plant is introduced, improvements on the substitution heat ability of polymerization kettle has been made and succeed.
结合高效催化剂在聚丙烯生产中的应用 ,对聚合釜换热能力进行了一些改进 ,介绍了改进的设计和取得的实际效
5) polymerizer
预聚合釜
1.
The development of BLF43 prepolymerizer and its structural characteristics;
BLF43型预聚合釜的开发及结构特点
6) 108 m3 polymerizer
108m3聚合釜
补充资料：聚合釜
分子式：
分子量：
CAS号：
性质：制备高分子化合物的主要设备。一般是立式圆柱形高压釜，带有夹套，以便通入蒸汽或冷水来加热或冷却。用于乳液聚合的，内有不锈钢的水平桨式搅拌器，由电动机通过传动装置和减速器传动。釜的外壁常用碳钢制成，内衬不锈钢，也有衬搪瓷的。聚合时可以单釜间歇生产，也可以是多釜串联连续生产。聚合反应物由一个釜的下部进入下一釜的上部。釜上装有温度、压力等仪表，以及进出料口等。用于本体聚合的，则釜内不装搅拌器，且不串联。此外，还有在长方形金属箱的浅盘中，以一定的速度流入而进行聚合的。
分子量：
CAS号：
性质：制备高分子化合物的主要设备。一般是立式圆柱形高压釜，带有夹套，以便通入蒸汽或冷水来加热或冷却。用于乳液聚合的，内有不锈钢的水平桨式搅拌器，由电动机通过传动装置和减速器传动。釜的外壁常用碳钢制成，内衬不锈钢，也有衬搪瓷的。聚合时可以单釜间歇生产，也可以是多釜串联连续生产。聚合反应物由一个釜的下部进入下一釜的上部。釜上装有温度、压力等仪表，以及进出料口等。用于本体聚合的，则釜内不装搅拌器，且不串联。此外，还有在长方形金属箱的浅盘中，以一定的速度流入而进行聚合的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条