1) SPPO
水基微乳液
1.
The lightly sulfonated poly(phenylene oxide) (SPPO) ionomers in different mixing solvents were emulsificated by water to form a series of waterborne microemulsions.
以乙酰磺酸为磺化剂制备了磺化度为３～１７ｍｏｌ％的磺化聚苯醚（ＳＰＰＯ）并中和成盐，在一定的温度和搅拌速度下，加水将ＳＰＰＯ乳化成水包油的稳定水基微乳液。
2.
Sulfonated poly(phenylene oxide)(SPPO) ionomers in different mixing solvents were emulsified by water to form a series of waterborne microemulsions.
以乙酰磺酸为磺化剂制备了磺化度为３ ～１７ ｍｏｌ％ 的磺化聚苯醚（ＳＰＰＯ） ，并中和成盐，在一定的温度和搅拌速度下，加水将ＳＰＰＯ 离聚体溶液乳化成水包油的稳定水基微乳液。
3.
In this article,the lightly sulfonated poly(phenylene oxide)(SPPO)ionomers in different mixing solvents were emulsificated by water to form a series of waterborne microemulsions,The principle of emulsification was explained,The aggregated structure of SPPO chains in organic solvents was discussed.
以乙酰磺酸为磺化剂制备了磺化度为 3%～ 1 7%mol的磺化聚苯醚 (SPPO)并中和成盐 ,在一定的温度和搅拌速度下 ,加水将SPPO乳化成水包油的稳定水基微乳液。
2) waterborne emulsion
水基微乳液
1.
In this work, the polystyrene was modified to sulfonated polystyrene ionomer(SPS) and was emulsified to a stable polymer waterborne emulsion by using the technology of phase inversion.
将聚苯乙烯制成磺化聚苯乙烯离聚体,利用相反转技术,将磺化聚苯乙烯离聚体制成具有纳米级稳定的水基微乳液,利用磺化聚苯乙烯颗粒内部作为反应场所,引发另一单体丙烯酸丁酯聚合,制备聚丙烯酸丁酯/磺化聚苯乙烯复合水基微乳液。
3) waterborne microemulsion
水基微乳液
1.
The lightly sulfonated poly(phenylene oxide)(SPPO) ionomers in DMSO/CHCl3 mixed solvents were emulsified by water to form a series of waterborne microemulsions.
以乙酰磺酸为磺化剂制备了磺化度摩尔分数为３％～１７％的磺化聚苯醚（ＳＰＰＯ），在一定的温度和搅拌速度下，加水将ＳＰＰＯ离聚体溶液乳化成水包油的稳定水基微乳液。
2.
The lightly sulfonated poly(phenylene oxide) (SPPO) ionomers in different mixing solvents were emulsificated by water to form a series of waterborne microemulsions.
在一定的温度和搅拌速度下 ,加水将SPPO离聚体溶液乳化成水包油的稳定水基微乳液。
4) SPS
水基微乳液
1.
Waterborne emulsions of lightly sulfonated polystyrene ionomer(SPS) were prepared by neutralizatioin with ammonia liquor and addition of water.
在一定的温度和搅拌速率下，加水将ＳＰＳ乳化成水包油的稳定水基微乳液。
2.
Waterborne emulsions of lightly sulfonated polystyrene ionomer (SPS) were prepared by neutralization with ammonia liquor and addition of water.
将聚苯乙烯改性制成磺化聚苯乙烯离聚体，溶解在甲苯／甲醇混合溶剂中，缓慢加水将聚苯乙烯乳化成稳定的水包油的水基微乳液。
5) hybrid waterborne emulsion
复合水基微乳液
6) water-based latex
水基乳液
补充资料：微乳液
分子式：
CAS号：
性质：简称微乳。通常由油、水、表面活性剂、助表面活性剂和电解质等组成的透明或半透明的液状稳定体系。分散相的质点小于0.1μm，甚至小到数十埃。其特点是分散相质点大小在0.01～0.1μm间，质点大小均匀，显微镜不可见；质点呈球状；乳液呈半透明至透明，极稳定，用离心机亦不能使之分层；与油、水在一定范围内可混溶。分散相为油、分散介质为水的体系称为O/W型微乳状液，反之则称为W/O型微乳状液。微乳液一般需加较大量的表面活性剂，并需加入辅助表面活性剂(如极性有机物，一般为醇类)方能形成。广泛应用于工业生产中，如地板抛光蜡液，机械切削油等。微乳液在石油开采中用于提高采收率。
CAS号：
性质：简称微乳。通常由油、水、表面活性剂、助表面活性剂和电解质等组成的透明或半透明的液状稳定体系。分散相的质点小于0.1μm，甚至小到数十埃。其特点是分散相质点大小在0.01～0.1μm间，质点大小均匀，显微镜不可见；质点呈球状；乳液呈半透明至透明，极稳定，用离心机亦不能使之分层；与油、水在一定范围内可混溶。分散相为油、分散介质为水的体系称为O/W型微乳状液，反之则称为W/O型微乳状液。微乳液一般需加较大量的表面活性剂，并需加入辅助表面活性剂(如极性有机物，一般为醇类)方能形成。广泛应用于工业生产中，如地板抛光蜡液，机械切削油等。微乳液在石油开采中用于提高采收率。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条