说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 内混式二相流雾化喷嘴
1)  internal-mixing twin-fluid atomizer
内混式二相流雾化喷嘴
2)  Y-jet internal-mixing double-stage atomizer
Y型内混双级雾化喷嘴
1.
Experimental study on flow characteristics of a Y-jet internal-mixing double-stage atomizer;
Y型内混双级雾化喷嘴流量特性研究
3)  internal-mixing-oil-nozzle
内混式喷嘴
1.
In internal-mixing-oil-nozzle running state,when oil working-pressure higher than the certain atomizing-gas pressure,the pressure in the mixing chamber may be higher than the atomizing-gas pressure and the first critical-point working-state occurred that some part of oil flew backwards into the gas-pipeline system by the air holes.
对某内混式喷嘴采用冷态流量实验研究与数据处理相结合的方法,确定了这两类临界工况,为内混式喷嘴的可靠运行提供了依据。
4)  internal-mixing nozzle
内混式喷嘴
1.
In flux calculation on internal-mixing nozzle,the pressure in the mixing chamber was often regarded as the production of atomizing medium pressure and critical compression ratio of this atomizing medium,but it has large error to the experimental result.
研究结果表明,内混式喷嘴混合室内压力并不等于雾化介质进口压力与临界压比之积,而与喷嘴的结构特性及运行参数密切相关。
2.
Experimental study on flux characteristic of internal-mixing nozzle;
实验结果表明,不同内混式喷嘴或同一喷嘴在不同运行参数下的流量系数值变化很大,与通常设计计算时的推荐值偏差最大达100%以上。
5)  secondary water mist nozzle
二级雾化喷嘴
6)  two-fluid nozzle
气流雾化喷嘴
1.
The experiments showed that the two-fluid nozzle can be mounted at the bottom or the lateral wall of the bed for powder granulation or coating.
气流雾化喷嘴是喷动流化造粒装置的主要部件。
补充资料:GPD低压混流式喷雾干燥机

 

工作原理:
      
    GPD系列低压混流式喷雾干燥机系气液两相混流式干燥设备,热风从塔顶沿塔壁进入塔内,物料由塔下部向上呈喷泉状喷出,与热风进行先逆流后并流的传热传质的运动过程。具有系统风阻小,单机干燥强度高,生产能力大的特点,尤其适用于无机类和低热敏性物料的大规模,连续化的干燥生产。

性能特点:

l.可实现对高固形物含量物料的干燥生产。
2.干燥产品的流动性良好,颗粒直径大。
3.适用于白炭黑、高岭土、陶瓷坯料、铁氧体等无机类和低热敏性物料的干燥生产。
4. 单机生产能力大,可采用油、气、汽、煤、电等多种热源,从25kg H2O/h~10,000kg H2O/h 生产能力的干燥设备均有产品.

   
 

 ①系统鼓风机  ②热源  ③料槽  
④料泵 ⑤干燥塔 ⑥旋风分离器 
⑦布袋除尘器    ⑧系统引风机


     技术特性:

          

 型 号
   项 目 

GPD

25500100015002000320040005000
蒸发能力
Kg H2O/h
25500100015002000320040005000
塔体直径
m
2.04.55.05.56.06.56.87.0
塔体高度
m
7.08.5111213151618
占地 长×宽
(m×m)
5×45×612×1015×1015×1218×1218×1220×15
雾化方式

低压喷咀雾化

进风温度120700
雾化压力1.5-3.5Mpa

其它

l 蒸发能力指进风温度为350℃时脱除纯水的能力
l
热源:蒸汽、电加热、燃煤、燃油、燃气、热风炉和烟气炉等。


   应用物料:

化学工业:白炭黑、混凝土外加剂、硫酸钡、碱式硫酸铬、氧化铝、氧化钛、高
          岭土、铁氧体、块滑石、碳化物、肥料 ,腐值酸、染料、洗涤剂、
          CR助剂、胶乳、净水剂、树脂、塑料、化剂、冰晶石等。 
食品工业:糊精、麦芽糖、蛋白粉、蛋黄粉、低聚糖、颗粒油脂、速溶咖啡、淀
          粉、香料、果蔬颗粒。 
乳品工业:脱脂奶粉、全脂奶粉、豆奶粉、冰淇淋粉、乳精粉、酷朊酸钠等。 
医药工业: 中西药粉剂、抗生素、生化产品、维生素、农药粉剂、水解蛋白、
          酶、单细胞蛋白等。 
建材工业:陶瓷坯料、釉料、超细粉料等 
环    保: 烟气脱硫、造纸黑液及药厂废液处理等。 
其    它:鱼粉废液、饲料     
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条