1) regenerative combustion
蓄热燃烧
1.
Based on the analysis of regenerative combustion method and the existing regenerative ladle heater,a new regenerative space combustion ladle heater is developed in combining with the practice ladle heating situation in Laiwu Steel Corporation.
在分析蓄热燃烧方法和现有蓄热式烤包器的基础上,结合莱钢炼钢厂钢包烘烤现状,研制开发了新的蓄热式空间燃烧烤包器。
2.
The principle and development history of regenerative combustion and its applications in metallurgical furnaces were introduced.
:文章对蓄热燃烧技术的原理、发展历史及其在冶金工业炉中的应用进行了介绍 ,并对蓄热燃烧中的换向阀及换向控制、NOx的控制等关键问题进行了分析 ,冶金工业炉需要实施这一项蓄热燃烧节能技术改造 ,以提高其热能利用率 ,减少环境污
3.
According to the application of regenerative combustion technology,flue gas flowing in the furnace,and the features of its system s heat transfer,it was set up in the paper a new kind of calculation for effective heat efficiency of combustion and furnace chamber,heat recovery rate,and total heat efficiency.
针对蓄热燃烧技术的运用和烟气在炉内的流动过程及系统的传热方式的特点,本文建立1种燃烧有效热效率、炉膛有效热效率、热回收效率与总热效率之间新的计算式,并对其中的各种影响因素进行了分析,其分析结果对炉型设计、热效率计算、技术改造等起到指导作用。
2) regenerative combustion
蓄热式燃烧
1.
Application of non-commutitative fuel direction regenerative combustion in melting furnace for anuminium;
不换向蓄热式燃烧技术在环形熔铝炉上的应用
2.
Application of regenerative combustion technology in ladle burner;
蓄热式燃烧技术在炼钢厂烤包器上的应用
3.
The new technologies of heating steel slab billet using natural gas as fuel and regenerative combustion way are mainly described,as well as obvious energy saving results are gained.
着重叙述了用天然气作燃料,采用蓄热式燃烧方式加热钢板坯的新技术,以及加热炉取得了显著节能效果。
3) regenerative ceramic burner
蓄热燃烧烧嘴
4) regenerative combustion system
蓄热式燃烧系统
1.
The successful application of a new-type regenerative combustion system for the heating furnace in a track beam plant is presented, together with a detailed explanation of the characteristics of the new-type combination burner as the core link,which deserves widely spreading as a successful example.
介绍了在某钢厂轨梁厂加热炉上成功使用的蓄热式燃烧系统,对核心环节新型组合式烧嘴的特点做了详细说明,做为成功范例,值得广泛推广。
2.
The high-efficient regenerative combustion system and switching system are organically combined with the furnace body.
该炉将高效蓄热式燃烧系统、换向系统与炉体有机结合 ,生产实践证明 :炉膛温度最高可达 14 0 0℃ ,废气排放温度低于 15 0℃ ,各项指标均符合设计要求。
5) regenerative combustion technology
蓄热燃烧技术
1.
Combined with the actual production,it is proved that the application of blast furnace gas and air double regenerative combustion technology on slab heating furnace is feasible.
结合张家港宏昌钢板厂3#蓄热式板坯加热炉的生产应用,对板坯加热炉的加热温度以及炉温均匀性等基本要素进行了研究,经对生产实际情况的综合分析,验证了高炉煤气、空气双蓄热燃烧技术在板坯加热炉上应用的可行性。
2.
Gas consumption would be decreased if the combustion system of soaking pit is rebuilt applying regenerative combustion technology.
应用蓄热燃烧技术改造传统均热炉燃烧系统,可以节约燃气的消耗率,提高炉内温度场的均匀性。
3.
The basic principle on regenerative combustion technology was introduced,fuel oil consumption and thermal efficiency of both the traditional and the regenerative furnace were calculated,and the calculated results on energy-saving benefit were analyzed.
介绍了蓄热燃烧技术的基本原理,对传统的加热炉和蓄热式加热炉分别进行了燃料油用量和热效率等的计算,并对计算结果进行了节能效益分析。
6) regenerative combustion technology
蓄热式燃烧技术
1.
Industrial application of regenerative combustion technology;
蓄热式燃烧技术的工业应用
2.
介绍蓄热式燃烧技术在炼钢厂钢包烘烤器上的应用、使用效果、技术特点和节能效益情况。
3.
Introduces the applications of regenerative combustion technology in designing the walking-beam reheating furnace for Yuzun high wire in Qinggang.
介绍了蓄热式燃烧技术在青钢钰尊高线步进梁式加热炉设计中的应用情况。
补充资料：蓄热式换热
分子式：
CAS号：
性质：工业中的换热方式之一。利用固体填充物贮蓄热量以达到换热目的。当气体通过时，根据气体的温度高于或低于填充物的温度，可将热量传给填充物或从填充物吸取热量。常用于冶金工业，也用于化学工业等。例如炼钢平炉和煤气炉常用来预热空气等。
CAS号：
性质：工业中的换热方式之一。利用固体填充物贮蓄热量以达到换热目的。当气体通过时，根据气体的温度高于或低于填充物的温度，可将热量传给填充物或从填充物吸取热量。常用于冶金工业，也用于化学工业等。例如炼钢平炉和煤气炉常用来预热空气等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条