1) ZrO_2 laminated ceramics
ZrO2层状复合陶瓷
1.
The micro-appearance feature, the formation of twin lines of monoclinic, the phase transformation and the crystal orientation relationship of ZrO_2 laminated ceramics were studied by scanning electron micro scope(SEM),transmission electron microscope(TEM), X-rays instruments, etc.
利用扫描和透射电子显微镜及X rays衍射仪等,对ZrO2层状复合陶瓷的显微形貌特征、断裂相变量及晶体学位向关系进行了深入研究。
2.
The formation of indentation cracking has some relationship with the transformation stress induced by martensitic transformation, besides the relationship with the residual stress by volume change in the plastic zone in ZrO_2 laminated ceramics.
在ZrO2层状复合陶瓷中,压痕裂纹的形成除了因塑性区体积变化产生的残余应力外,还与相变应力有关。
2) Laminated ceramic composites
层状复合陶瓷
1.
Based on the multilayer beam model, with a view to the heterogeneity of the material, this paper focused on the fracture behavior of the laminated ceramic composites by the finiteelement method.
基于多层梁模型,在考虑材料非均匀性的基础上,采用有限元数值模拟的方法研究 了层状复合陶瓷的断裂行为。
2.
In this paper,the different mechanisms that can be used to reinforce laminated ceramic composites were reviewed,optimum design f such composites was analyzed and preparation was concluded.
层状复合陶瓷具有显著的增韧效果 ,其独特的层状结构为陶瓷材料的设计和制备工艺技术提出了新的研究课题 ,成为当前陶瓷增韧技术研究的热点。
3.
The dated work about laminated ceramic composites is reviewed- The preparation methods, the bonding be-tweed interfaces and the effects of interfaces on the Iaminated ceramic composites were discrided.
本文综合评述了层状复合陶瓷研究现状，分析了层状复合陶瓷的制备工艺和界面结合情况以及界面对层状复合陶瓷性能的影响。
3) laminated ceramics
层状复合陶瓷
1.
the composites composed of the monolithic Si3N4 ceramics and Si3N4/BN laminated ceramics have been prepared through bullet-proof structure designing,and the behavior of armour pierced-resistance of such materials was studied.
提出混杂结构设计的构思,并成功地制备了具有混杂结构的Si3N4/BN层状复合陶瓷,同时研究了材料的抗穿甲燃烧弹冲击的能力。
2.
The behaviors of impact resistance and armour pierced-resistance of Si3N4/BN laminated ceramics were studied.
研究了Si3N4／BN层状复合陶瓷的抗冲击破坏及抗穿甲破坏行为。
4) laminated composite ceramics
层状复合陶瓷
1.
Study on fracture behavior of BN - SiC laminated composite ceramics;
BN-SiC层状复合陶瓷的断裂行为研究
5) laminated A12O3 Ceramic matrix Composites
A12O3层状复合陶瓷
6) laminated ceramic
层状复合陶瓷
1.
The simple die_pressing technique was used to fabricate three layer Al 2O 3/ZrO 2 laminated ceramics in the form of film/substrate systems.
45 %Al2 O3/ZrO2 / 45 %Al2 O3层状复合陶瓷的弯曲强度达 682MPa,断裂韧性达 16。
2.
The paper reviews the current work about the fracture properties of laminated ceramic,including the analyses of several principal toughening mechanism and the effects of certain variables.
本文着重讨论了层状复合陶瓷断裂特性，包括几种主要的增韧机制的分析和影响因素的讨论。
补充资料：生物惰性陶瓷涂层-金属复合材料
分子式：
CAS号：
性质：生物惰性陶瓷涂于医用金属基底上形成的复合材料。陶瓷材料主要是氧化物生物陶瓷和医用碳素材料。金属材料包括不锈钢、钴基合金和钛基合金等。制备涂层的方法有等离子喷涂、气相沉积、离子溅射、浸渍、烧结、电泳和热解等。复合材料主要用于制造人工骨、关节柄、关节臼、人工心瓣膜和人工牙根等。
CAS号：
性质：生物惰性陶瓷涂于医用金属基底上形成的复合材料。陶瓷材料主要是氧化物生物陶瓷和医用碳素材料。金属材料包括不锈钢、钴基合金和钛基合金等。制备涂层的方法有等离子喷涂、气相沉积、离子溅射、浸渍、烧结、电泳和热解等。复合材料主要用于制造人工骨、关节柄、关节臼、人工心瓣膜和人工牙根等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条