1) blast loading
爆炸荷载
1.
The studies on blast loading and blast effects on RC structures;
爆炸荷载及爆炸对RC结构影响的研究
2.
Lethality rate of building collapse to blast loading;
爆炸荷载作用下建筑结构倒塌的致命率
3.
Analysis of dynamic respo nses and failure modes of R/C beams under blast loading;
爆炸荷载作用下钢筋混凝土梁的动力响应及破坏形态分析
2) blast load
爆炸荷载
1.
Finite element analysis for CFST columns under blast load;
爆炸荷载作用下钢管混凝土柱的有限元分析
2.
Optimal design of RC panels against blast loads using energy-based approach;
爆炸荷载作用下RC单向简支板的优化设计
3.
Dynamic response and failure modes of RC column under blast load;
爆炸荷载下钢筋混凝土柱的动力响应及破坏形态分析
3) explosion load
爆炸荷载
1.
Fracture of steel frame-structure under explosion load is investigated in this paper with dynamic finite element software ANSYS/LS-DYNA.
采用有限元软件ANSYS/LS-DYNA研究空间钢框架在爆炸荷载作用下,从开始发生变形直至倒塌的全过程。
2.
Because the duration of explosion load is very short,and the wave velocity is very quick in the structure,the reaction of structure on the load of explosion mainly belongs to the vibration theory.
爆炸荷载作用下结构的分析分为两类:波动理论和振动理论。
3.
In the model test,tunnels bear explosion load including plane charge and mass charge.
通过物理模型试验,研究洞室在平面装药和集中装药爆炸荷载作用下不同加固方案的对比抗爆效果。
4) explosive load
爆炸荷载
1.
The functions of explosive load on architectural structure and its developing circumstance;
爆炸荷载对建筑结构作用的研究与发展状况
2.
Under the explosive load,shotcrete and rock bolt support and integral lining structures are usually used for chambers in rock mass.
在爆炸荷载作用下,岩体洞室通常采用喷锚支护结构和整体被复结构。
3.
To know the bonding and fixation of insert rebar under explosive loads, the behavior of adhesive anchors under explosive tensile loads was studied with the finite element method (FEM) ANSYS and appropriate calculating model.
为研究爆炸荷载作用下植筋的粘结锚固性能,采用ANSYS有限元分析软件,选取合理计算模型,对植筋试件在爆炸荷载作用下受力特性进行了数值计算。
5) explosion loading
爆炸荷载
1.
Numerical simulations on rock damage under explosion loading are studied by use of the new rock dynamic damage model established.
计算结果较好地反映了爆炸荷载作用下岩石的损伤演化规律，客观地再现了爆破破岩的物理过程。
2.
An integral equation in transformed filed that represents the displacement field in the tunnel subjected to explosion loading has been deduced by using integral transformation.
基于圆柱形薄壳结构理论,建立爆炸荷载作用下隧道结构的动力平衡方程。
6) Explosive loading
爆炸载荷
1.
Strain field and damage analysis of clamped square plates subjected to explosive loading;
爆炸载荷作用下固支方板的应变场及破坏分析
2.
Large deformation in the energy-absorbing unit of a multi-row steel pipe structure under explosive loading is of great significance to the design of an explosion-resistant energy-absorbing unit.
钢管拼装吸能元件在爆炸载荷作用下的大变形问题,对于抗爆结构的吸能装置设计具有重要意义。
3.
Cylindrical explosive devices were used to develop the dynamic fracture criteria of thin cylindrical shells under internal explosive loading.
以柱形爆炸装置为研究对象 ,讨论了其薄壁壳体在爆炸载荷下的动态断裂准则。
补充资料：核爆炸地震波探测(见核爆炸探测)
核爆炸地震波探测(见核爆炸探测)
nuclear explosion seismic detection
hebaozho dizhenbo tanee核爆炸地震波探测(nuclear explos，onseismie detecuon)见核爆炸探汉，l。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条