1) blowoff impulse
喷射冲量
1.
The behavior of blowoff impulse in 3 dimensional (3 D) braided composites radiated by pulsed electron beam were studied experimentally on “FLASH Ⅱ” accelerator.
采用微型红外通光传感技术和直接测量特定时间间隔系列的探头原理 ,在“闪光二号”脉冲电子束加速器上 ,进行了三维编织复合材料等的喷射冲量特性实验研究。
2.
The blowoff impulse in materials radiated by the pulsed soft X-ray on Qiangguang-Ⅰ accelerater was measured by using an impulse equipment in which the target-pendulum moves in the rotational way.
采用靶摆旋转运动式冲量探头,在“强光一号”加速器上,测量了脉冲软X射线辐射材料产生的喷射冲量。
3.
When a pulsed,high-energy,high-intensity particle beam such as electron beam bombards a solid target, there will often exist melting, vaporizing and mass blowoff phenomena on the front surface,which give it a blowoff impulse load.
采用通光式传感法和直接测量特定时间间隔的探头原理，在“闪光２号”装置上进行了电子束辐照硬铝靶产生的喷射冲量耦合系数与能通量关系的研究。
2) blow-off impulse
喷射冲量
1.
The blow-off impulse of composites induced by pulsed soft X-ray was studied on "Qiang guang-I" pulsed accelerator.
采用自行研制的微型红外通光测试系统,对三种复合材料和硬铝在脉冲软X射线辐射下的喷射冲量进行了实验测量研究。
2.
The blow-off impulses in Ly-12 aluminum irradiated by intense pulsed X-ray were computed according to experimental time spectrum of X-ray source.
结合实际的时间谱,计算了强脉冲X射线辐射Ly-12铝靶材所产生的喷射冲量效应,喷射冲量数值计算结果与实测结果进行了比较,两者基本一致。
3) Jet impingement
喷射冲击
5) multi-pulse injection
多脉冲喷射
1.
Controlled premixed charge compression ignition of diesel engine based on multi-pulse injection was developed.
实验结果表明,采用155°和125°喷射锥角的油嘴,改变多脉冲喷射定时可控制预混燃烧放热幅度,影响NOx与HC和CO排放的折衷关系。
2.
Based on the understanding of multi-pulse injection mode modulation system and combustion process, a series of typical injection modes were designed.
基于多脉冲喷射模式调制的电控开发系统和对柴油HCCI燃烧过程的认识,设计了一系列的典型调制多脉冲喷油模式,包括交错式(SM)、驼峰式(HM)、均衡式(EM)和递增式(PIM)。
6) jet impact force
喷射冲击力
补充资料：冲量
| 冲量 impulse 力的时间累积效应的量度。是矢量。如果物体所受的力是大小和方向都不变的恒力F，冲量I就是F和作用时间t的乘积。如果F的大小、方向是变动的，冲量I应用矢量积分运算。冲量通常用来求短暂过程（如撞击）中物体间的作用力，即由物体的动量增量和作用的时间而估算其作用力。此力又称冲力。冲量的单位和动量相同，在国际单位制中为千克·米／秒。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条