1) Structural Phase
结构相
1.
In addition to yarn rigidity,yarn linear density and drawing that fabric is stretched in warp-wise and weft-wise during the finishing,weaving set faotors have a great influence on fabric structural phase.
除纱线的刚度、经纬纱的特数和后整理过程中织物经纬向受力等因素外 ,织造参变数对织物结构相的影响是很大的。
2.
Aiming at the woven seersucher,this article,based on the structural features of the fabric,expounds the relationship between the structural phase and the fell of the cloth,and discusses the forming machanism of seersucher as well as the key factors of seersucher formation.
文章从织物的结构形态出发,针对织造法加工的泡泡纱织物,阐述了不同的织物结构相和织口变化之间的关系,论证了泡泡纱形成的主要原理和泡泡纱形成的关键要素。
2) phase structure
相结构
1.
The phase structures and hydrogen storage properties of (Ti_(0.1)V_(0.9))_(1-x)Fe_x(x=0~0.06) alloys;
(Ti_(0.1)V_(0.9))_(1-x)Fe_x(x=0~0.06)合金的相结构及储氢性能
2.
Microstructural morphology and phase structure of rapidly solidified Cu-Sn alloy;
快速凝固Cu-Sn合金的组织形态及相结构
3.
Microstructure, phase structure and microhardness of as-cast Ti-Sc binary alloys;
铸态Ti-Sc二元合金的组织特征、相结构和显微硬度
3) morphological structure
相态结构
1.
Effects of coupling agents on curing characteristics and physical-mechanical properties of the two kinds of composites were investigated,and the morphological structure of the composites were observed by scanning(electron) microscope.
采用乳液共混法制备了淀粉/丁苯橡胶(SBR)以及间苯二酚甲醛树脂(RF)改性淀粉/SBR复合材料,考察了偶联剂对2种复合材料硫化特性、力学性能的影响,并用扫描电镜观察了其相态结构。
2.
The morphological structure of dynamically vulcanized thermoplastic(elastomer)(TPV) ethylene propylene diene monomer(EPDM)/polypropylene(PP) was investigated with scanning electron microscope.
用扫描电镜研究了三元乙丙橡胶(EPDM)聚/丙烯(PP)动态硫化热塑性弹性体(TPV)相态结构的形成过程,探讨了交联密度、制备工艺、螺杆转速对EPDM/PP TPV相态结构的影响。
3.
The morphological structures of NBR/PP TPV were analyzed.
苄酯4种增塑剂对丁腈橡胶(NBR)聚/丙烯(PP)热塑性硫化胶(TPV)邵尔A硬度、耐油性能和流变性能的影响,并用透射电镜分析了4种增塑剂对NBR/PP TPV相态结构的影响。
4) similar structure
相似结构
1.
The similar structure of pressure distribution in the homogenous reservoir;
均质油气藏试井分析解的相似结构
2.
Robust control for generalized interconnected systems with similar structures;
具有相似结构的广义互联系统的鲁棒控制(英文)
3.
It is discovered to the similar structure of the solution′s form in the three kinds of ou.
针对复合油藏,建立了考虑井筒储集和表皮效应和三种外边界(无穷大、定压、封闭)条件下的试井分析模型;利用Laplace变换,在Laplace空间中得到了储层压力和井底压力分布的精确解;经全面和深入的分析,发现了描述该类油藏在三种外边界条件下的渗流特征的解式之间具有的相似结构,并作了进一步的讨论。
5) crystalline structure
晶相结构
1.
Influence of K_2O impurity on the crystalline structure of cordierite synthesized from waste aluminum slag;
K_2O杂质对铝型材厂工业废渣合成的堇青石材料晶相结构的影响
2.
Effects of preparation methods on crystalline structure of Ni-Mo oxide catalysts;
制备方法对Ni-Mo氧化物催化剂晶相结构的影响
3.
Using the technologies such as X-ray diffraction (XRD) and Scanning electron microscope (SEM), the article discussed the influence of the factors such as crystalline structure of standards and samples and their preparation on the analytical result when analyzing silicon dioxide content in organic glass filler ash with X-ray fluorescence spectrometry (XRF
利用X射线衍射(XRD)和扫描电子显微镜(SEM)等分析技术,探讨了用X射线荧光光谱法(XRF)分析有机玻璃填料灰渣中二氧化硅含量时标样和样品晶相结构及样品制备方法等因素对分析结果的影响。
6) phase
[英][feɪz] [美][fez]
相结构
1.
Manufacturing Process, Electrochemical Properties and Phase Structures of Mm(NiMnTiCo) 5 Hydrogen Storage Alloys;
Mm(NiMnTiCo)_5贮氢合金的制备工艺、电化学性能及相结构研究
2.
In this paper, the experiment methods of Transmission Electron Microscope (TEM) are adopted to study the microstructure and the phase of Ti-700 titanium alloy which has been heat-treated within the two-phase area.
采用透射电子显微镜(TEM)研究了两相钛合金Ti-700在不同热处理制度下的显微组织和相结构。
3.
With the help of scanning electron microscope, energy - dispersive x - ray analyzer and x - ray diffractometer, the plasma sulphur-nitrocarburised case’s surface and subsurface characteristics of topography and phase were analysed,The mechanism for the formation of the surface sulphides layer was proposed.
采用扫描电镜、能谱仪、X射线衍射仪等分析研究了离子硫氮碳共渗层表面与次表面形貌特征与相结构,探讨了其形成机制。
补充资料:结构相对指标
结构相对指标是在资料进行分组的基础上,以总体总量作为比较标准,求出各组数量占总体总量的比重,来反映总体内部的构成比重的综合指标。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条