1)  Crystalline plastics
结晶型聚合物
2)  crystallization
结晶
1.
Crystallization Properties of PPS/GF/Nano-CaCO_3 Ternary Composites;
PPS/GF/Nano-CaCO_3三元复合材料的结晶性能
2.
Influence of Fillers on Crystallization Performance of PP;
填料对PP结晶行为的影响
3)  crystal
结晶
1.
Phospholipids purification with alcohol solution and removal impurity by refrigerating crystal;
乙醇提取冷冻结晶去杂精制磷脂酰胆碱
2.
Study on the Crystalline Structure of Silane Graft Linear Low-density Polyethylene;
硅烷接枝LLDPE结晶结构的研究
3.
Impact of cooling rate on NaCl crystal granularity;
冷却速率影响NaCl结晶粒度的研究
4)  crystalline
结晶
1.
Application of DSC and X-ray diffraction in the analysis of lactose crystalline;
DSC与X-射线衍射技术在乳糖结晶分析中的应用
2.
Purification and Crystalline of Penicillin G Acylase;
大肠杆菌108(pPAHD1)青霉素G酰化酶的纯化与结晶
3.
The effect of β nucleating agent on the crystalline property of polypropylene(PP)is investigated.
研究了β成核剂对PP结晶性能的影响,并对β晶型PP进行了DSC扫描分析和广角X射线衍射分析。
5)  crystallize
结晶
1.
Synthesis and characterization of crystallized & cross-linked high water vapor permeable polyurethane;
高透湿结晶交联型聚氨酯的制备及其性能
2.
And then the solution of salt has condensed and crystallized.
对水煤气净化系统氨积累成因进行分析,由于流体流动边界层的存在,氨与部分冷凝水在换热器管程内壁反应形成盐溶液并在管程内冷却结晶,从而造成铵盐结晶。
3.
The technical process as follows:deliquate brine—dissolve mineral-adjust concentration—cultivate—crystallize—separate—mirahilite.
其工艺流程为：淡卤→化矿→配兑→保卤→结晶→新法分离→芒硝。
6)  crystallinity
结晶
1.
The cohesive energy desity,viscosity and viscosity average molecular weight plus crystallinity of aramid paper before and after heat-calendering were determined.
测定了热压光前后纸基芳纶纤维的内聚能密度、结晶度大小、粘度及粘均相对分子质量,研究了芳纶纸基纤维玻璃化温度与内聚能密度及结晶度的关系。
2.
In this paper, based on the x-ray diffraction experiment, the crystallinity,preferred orientation and mechanics behavior of PSA fiber after thermal treating were discussed in detail.
芳砜纶(PSA)纤维有着优异的耐高温性,通过X衍射对纤维结晶和取向度测试分析,研究了纤维在经过热处理后的力学性能的变化。
3.
In order to control the crystallinity of the hard and soft segments,1,2-PG and PNA,which contain(dissymmetrical) and symmetrical side methyl groups respectively,were incorporated into the hard-segment and the soft-(segment) respectively.
通过在软段和硬段中分别引入带有对称和非对称侧甲基结构的PNA、1,2-PG,采用WAXD、SEM、FT-IR、DSC等方法,考察了软硬段结构及硬段含量的改变对聚氨酯胶粘剂软硬段结晶行为、微相分离结构,以及对粘接性能、力学性能的影响。
参考词条
补充资料：结晶性压电聚合物
分子式：
CAS号：

性质：与非晶性压电材料相对应，指结晶度较高的压电聚合物，一般完全结晶的压电聚合物比较少见，一般多为具有永久偶极矩的聚合物。结晶度较高的聚合物，以聚偏二氟乙烯为例，由熔融液态转变为结晶体时形成螺旋状的分子晶体，称为α晶体，压电特性不显著。当这种晶体在60℃时进行拉伸，可以转换成锯齿状的分子晶体，称为β晶体，偶极矩加大，具有显著压电效应。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。