1) single pulse electrodpositing
单脉冲电沉积
2) pulse electrodeposition
脉冲电沉积
1.
Process of pulse electrodeposition of nanocrystalline Ni-Cr alloy from trivalent chromium bath;
三价铬脉冲电沉积纳米晶Ni-Cr合金工艺
2.
Pt-Ru-La/C electrocatalyst for DMFC prepared by pulse electrodeposition;
脉冲电沉积法制备DMFC用Pt-Ru-La/C电催化剂
3.
Cobalt/platinum multilayer prepared by pulse electrodeposition in a single cell and its characterization;
单槽脉冲电沉积制备钴/铂多层膜及其性能表征
3) electro-pulse deposition
电脉冲沉积
1.
High temperature corrosion behavior of microcrystalline aluminide coatings by electro-pulse deposition;
电脉冲沉积铝化物微晶涂层的高温腐蚀行为
4) pulse current electrodeposition
脉冲电沉积
1.
A nanostructured nickel alloy and a Ni/Si3N4(w) composite were fabricated by pulse current electrodeposition,and their superplastic tensile deformation behaviors were investigated at strain rates ranging from 1×10?3 to 2×10?2 s?1 and temperatures ranging from 673 to 823 K.
采用脉冲电沉积技术制备纳米镍合金及Ni/Si3N4(w)复合材料,在应变速率为1×10-3~2×10-2 s-1,温度为673~823 K的条件下,研究它们的超塑性拉伸变形行为,确定最佳超塑性条件并获得最大伸长率。
5) pulse plating
脉冲电沉积
1.
Based on study on the influence of solution composition and pulse parameters, namely, pulse on-time, off-time and peak current density on deposition layer in the pulse plating process, desirable diamond tools are easily obtained by using the alternating pulse deposition.
课题主要研究了脉冲电沉积法制备纳米镍钴材料的制备工艺及所制备材料的性能,并对该技术如何应用在金刚石工具进行了研究。
2.
,metal Cu nanocrystalline layers were plated on the surface of metal substrates by pulse plating,then the Cu nanocrystalline layers were used to synthesize CuO nanoneedles by thermal oxidation method at 700℃ in the air.
采用脉冲电沉积技术在金属 Cu 基板表面电沉积纳米晶 Cu 薄膜,在空气中采用热氧化法制备出一维金属 CuO 纳米针材料。
6) Pulse electro-deposition
脉冲电沉积
1.
Pt-Ru-Eu/C electric catalysts were prepared by pulse electro-deposition method.
采用脉冲电沉积法制备Pt-Ru-Eu/C电催化剂,循环伏安法(CV)测定催化剂的甲醇电氧化活性,用XRD,EDS和XPS表征电极及催化剂的物性结构、表面元素组成和价态形式。
2.
The Pt-Ru-Ho/C catalysts for methanol electro-oxidation have been prepared by pulse electro-deposition method.
采用脉冲电沉积法制备了碳载的Pt-Ru-Ho电催化剂,循环伏安法(CV)和交流阻抗法(EIS)测定催化剂的甲醇电氧化活性,用XRD、EDS和XPS表征电催化剂的物性结构、表面元素组成和价态形式。
3.
The precursors of active material were impregnated in porous carbon black layer in advance, and Pt or Pt alloy were firstly deposited on the surfaces of carbon black nearby Nafion particles by the pulse electro-deposition method.
预先将活性物前驱体置于碳黑层的Nafion微粒体内,利用脉冲电沉积法,使Pt或Pt合金优先沉积于Nafion与碳黑的接合部,以提高催化剂层贵金属的有效率。
补充资料：脉冲电磁场
见瞬变电磁场。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条