说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 中间储罐
1)  middle vessel
中间储罐
1.
Study on simulation of batch extractive distillation with a middle vessel;
带有中间储罐的间歇萃取精馏的模拟研究
2.
The solvent selection and batch extractive distillation with a middle vessel (BEDM) were studied by theoretical analysis and experiment.
本文通过理论分析和实验相结合的方法,主要研究了萃取精馏溶剂的选择以及带有中间储罐塔的间歇萃取精馏过程的操作性能和设计计算问题。
2)  intermediate tankage
中间罐区储油量
3)  tank spacing
储罐间距
1.
As the result of the influence of some dynamic factors such as tank spacing,pore water pressure change,the issue of the settlement tends to complex.
由于沉降问题受到储罐间距、孔隙水压力变化等动态因素的影响,使得问题的解决趋于复杂。
4)  medium-pressure gas tank
中压储气罐
1.
This article introduced the design process of the medium-pressure gas tank,the design variable determination basis as well as the item which should be paid attention in the design process.
本文介绍了中压储气罐的设计过程、设计参数的确定依据以及在设计过程中应注意的事项。
5)  tundish [英]['tʌndiʃ]  [美]['tʌndɪʃ]
中间罐
1.
the weirs and dams in the continuous casting tundish will no longer play any role in improvement of the steel quality if the hot metal is alreay refined to a rather high level of cleanliness before pouring into the tundish.
钢水进入中间罐之前,在钢包炉内精炼时,若已将钢水纯度提到相当高的程度,则中间罐挡墙已不再具有继续改善钢质量的作用。
2.
In order to further lowering production cost and increasing the baking quality of tundish, No.
为降低生产成本、提高中间罐烘烤质量 ,济钢第一炼钢厂对连铸机中间罐烘烤工艺进行改造。
3.
A physical model for molten steel taking in gas from ladle to tundish during continuous casting was built.
建立了盛钢桶到中间罐钢液吸气的物理模型,利用NaOH水溶液 CO2系模型来研究注流及中间罐液面的吸气(CO2)速率,从而考察操作参数对中间罐钢液吸气速率的影响。
6)  middle vessel
中间贮罐
补充资料:中间罐预热站


中间罐预热站
tundish preheating station

zhongjianguan yurezhan中l’ed罐预热站(tundish preheating Station) 将周转使用的中间罐内衬在60一120min之内预热到1000℃以上,以减少钢水进入中间罐后的温降,保持最佳的浇注状态的连铸设备。中间罐预热站设置在浇注平台上连铸主作业线的两侧,每侧一个。预热站由立柱、前端带烧嘴的回转臂、驱动装置、风机、空气和燃气管线和阀门等以及电控设备组成。驱动可以用电动缸,亦可用液压缸。燃料可以用焦炉煤气、天然气或轻油。水口预热装置用于中间罐水口的预热,是独立的装置,但燃气管线常从中间罐预热站中分出来。水口预热有两种方式:直接加热式和抽气式。直接加热式是以带有支承结构的烧嘴对中间罐水口直接加热。抽气式是用中间罐预热的燃烧气体,使其通过水口使之达到预热的方式。这种方式还需配备小风机,文氏管喷射器以及压缩空气喷射源等。在采用外装式浸入式水口操作的连铸机上,还需配备浸入式水口烘烤炉,对备用浸入式水口进行预热,以便在事故状态下,可以随时更换经预热过的浸入式水口。 (俞姜)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条