1) length and centre
定尺定心
1.
On the basis of the studies on the effect of hot-centering machine on the production of hot-rolled seamless tubes and the advantages and disadvantages of several types of the present hot-centering machine, A new type of hot-centering machine was designed by ourselves which could realize the length and centre and could centre simultaneously at the head and the end.
文章主要通过研究热定心机在热轧无缝钢管生产中的作用及目前普遍采用的几种热定心机的优缺点,从而设计出一种新型的能定尺定心、能首尾同时定心的双向热定心机。
2) Cut-to-length
定尺
1.
Based on the process control and requirement of the continuous casting machine(CCM),with the PLC control system,full automatic cntrol of cut-to-length was realized by combining cutting technology of the flames cutter machine with manipulating the imagines to length of steel billet by untouched-mode.
介绍了在结合连铸机生产过程控制及其要求的基础上,在PLC系统控制下,采用火切机切割和非接触式图像定尺控制技术相结合,实现了连铸机定尺切割的全自动的设计。
2.
The technology of using image analysis and pattern recognition to implement the non-touching automatic billet cut-to-length is mainly introduced.
运用图像分析和模式识别技术 ,实现非接触式的方坯自动定尺切割。
3.
5 continuous caster at the Steelworks by heavier interference of flame cutting to infrared non-contact cut-to-length system and not high enough cutting precision,the PLC cut-to-length system was developed,satisfactorily solving the cut-to-length problem.
为解决炼钢厂5#连铸机的红外无接触定尺系统受火焰切割干扰较大,切割精度不高,经常造成铸坯长短尺的问题,开发了PLC定尺系统,很好地解决了定尺问题。
3) cut-to-length
定尺切割
1.
Application of non-touching cut-to-length system in bloom caster;
非接触式定尺切割系统在方坯连铸机上的应用
2.
The thesis is to simply introduce how to use a pickup-camera to capture imagine,and through manipulating the imagines to measure the length of steel billet by untouched-mode ,and how to use the result to control the cutting device to move automatically ,assuring the small tolerance of cut-to-length.
简单介绍利用摄像头进行图像采集后,通过对图像信号进行处理,实现非接触式板坯长度测量,并依据测量结果,驱动切割设备自动定位,实现连铸钢坯的高精度自动定尺切割。
4) the ratio of the fixed length
定尺率
1.
In order to improve economic benefit,we should control the dimension of the material;improve the ratio of the fixed length and finish.
控制原料尺寸,提高定尺率和成材率是途径之一。
5) dividing shear
定尺剪
1.
With development of the industrial control system,programmable logic controller(PLC) is widely used in dividing shear of Baosteel Heavy Plate Mill(HPM),especially in the fields of the main motor control of dividing shear,collection and analysis of PDA data,control of pinch rolls, adjustment control of knife gaps,shearing process control,etc.
随着工业控制系统的不断发展,可编程控制器在宝钢分公司厚板厂定尺剪系统中得到了全新的应用,尤其在定尺剪的主电机控制、PDA数据采集和分析、夹送辊控制、剪刃间隙调整控制、剪切过程控制等方面得到了应用。
2.
This paper primarily discusses the electrical main drive control principle of the dividing shear which is the last shear equipment in the shear line of Baosteel 5 m Heavy Plate Mill.
主要介绍了宝钢 5m宽厚板剪切线中最后一台剪切装置—定尺剪的电气主传动控制方法。
6) sizing and evaluation
定尺评估
1.
Mud/gas separator sizing and evaluation in unbalanced drilling;
欠平衡钻井用泥浆/气体分离器的定尺评估
补充资料：定心
【定心】
（术语）修禅行而远离乱意也。无量寿经下曰：“深心定心。”智度论二十六曰：“定心者，定名一心不乱。乱心中不能得见实事，如水波荡，不得见面。如风中灯，不能得点。”
（术语）修禅行而远离乱意也。无量寿经下曰：“深心定心。”智度论二十六曰：“定心者，定名一心不乱。乱心中不能得见实事，如水波荡，不得见面。如风中灯，不能得点。”
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条