1)  Oxidation under pressurized oxygen
氧压氧化
2)  oxygen pressure
氧压
1.
Study on low grade sulfide zinc-lead ore flotation and separation through acid leaching with oxygen pressure;
低品位硫化铅锌矿混合浮选-氧压酸浸分离铅锌的研究
2.
With varying the oxygen pressure of the sample fabrication,the resistivity of LCMO film and the metal-insulator transition temperature T_P are changed.
随着样品制备氧压的变化,LCMO薄膜电阻率和金属-绝缘体转变温度TP都有所变化。
3.
Effect of oxygen pressure on the preparation of TI-system superconductors at pres-sure 0～3MPa is reported.
系统地研究了在０～３ＭＰａ氧压下Ｔ１系超导材料的制备过程及其超导性质。
3)  Oxygen compressor
氧压机
1.
The transformation scheme of cooling water for bottle-filling oxygen compressor and problems for cautious during the implement in Air Separation Works of Tiantie Group are introduced, which provide the theoretic basis and practical guide for saving water resources in cooling water circulation and the funds.
介绍了天铁集团空分厂充瓶用氧压机冷却水的改造方案,及实施中应注意的问题,为解决冷却水循环节约水资源和资金提供理论依据及实践指导。
2.
In order to meet the needs of oxygen amount required by blast furnace ironmaking,the piston-type oxygen compressor with final pressure 3 MPa should be changed to the oxygen compressor with final pressure 0.
介绍了为适应高炉炼铁用氧需要,将设计终压3MPa的活塞式氧压机改造为终压0。
3.
The paper makes a comparison of operating parameters when oxygen compressor use energy-saving lubrication and use normal lubrication.
对氧压机试用节能润滑油前后的相关参数进行比较,通过计算验证该设备使用此油后的节电率,取得了预期的经济效益。
4)  pore-free die casting
充氧压铸
1.
This paper introduces the characteristic and technical parameters of pore-free die casting,and summarizes the applied survey of pore-free die casting.
　介绍了充氧压铸工艺的特点和工艺参数,综述了充氧压铸工艺的应用概况。
5)  low oxygen pressure
低氧压
1.
Oxidation behavior of two-phase Cu-Ni-Fe alloy under low oxygen pressure at 800～900 ℃;
Cu-Ni-Fe双相合金在800～900℃的低氧压氧化
2.
The oxidation behavior of nano-sized Fe-75Cu coatings, prepared by sputtering deposition, was studied at 600 and 800 ℃ under low oxygen pressures, by which only Fe can be oxidized.
采用热重分析实验研究了用磁控溅射沉积制备的Fe-75％Cu(质量分数)纳米涂层在低氧压条件下(只有Fe可被氧化)的氧化,探讨了纳米晶粒尺寸及氧分压对双相合金高温氧化机制的影响。
6)  pressure oxidation
氧压煮
1.
Current status of technical development for producing molybdenum oxide,application roastpressure oxidation process,pressure oxidationroast process and pressure oxidationsolvent extraction process were reviewed.
评介了焙烧氧压煮法、氧压煮-焙烧法和氧压煮-溶剂萃取法生产氧化钼技术的发展现状。
参考词条
补充资料：氧化钛压敏陶瓷
分子式：
CAS号：

性质：一种由二氧化钛晶粒和三氧化二铋的晶体组成的具有电压电流非线性现象(压敏效应)的半导体陶瓷。为低电压特征材料，压敏电压6.4～32V，特性非线性指数α=2.3～2.5。二氧化钛中添加五氧化二铌等半导体和氧化铋、氧化钙、氧化硅等改性剂在1100～1400℃烧结再被电极而成。用于微型马达的电火花消除、电触点保护、电路电压保护等方面，在家用电气设备中得到广泛应用。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。