说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 均匀-重复设计优化法
1)  UI-DOS
均匀-重复设计优化法
1.
In the chromatography separation process of fourteen aromatic compounds, a method of UI-DOS was adopted to optimize the chromatographic conditions.
在14种芳香族化合物的色谱分离过程中,采用了均匀-重复设计优化法优化分离条件,并将量子粒子群算法应用到搜索最佳分离条件的过程中。
2)  Uniform design optimization
均匀设计优化
3)  uniform design method
均匀设计法
1.
Application of the uniform design method in developing A-TIG activating fluxes for aluminium alloy;
均匀设计法在铝合金A-TIG活性剂配方研制中的应用
2.
Application of uniform design method in preparation of powdered polychloroprene rubber;
均匀设计法在粉末氯丁橡胶制备中的应用
3.
Uniform design method used in the preparation of liposomal 5-FU and the stabilities;
均匀设计法制备5-氟尿嘧啶脂质体及其稳定性
4)  uniform design
均匀设计法
1.
Optimization of the Components and Dose Proportion of WEIDEJIAN with Orthogonal t Design and Uniform Design;
正交t值法结合均匀设计法优化胃得健药味组成和剂量配比
2.
Choice of Condition of ABS Resin Surface Metallization by Uniform Design;
均匀设计法对ABS树脂表面金属化条件的选择
3.
Optimization of matrix formulation and preparation procedure of Bitongxiao cataplasm by uniform design
均匀设计法优选痹痛消巴布剂基质配方研究
5)  homogeneous design method
均匀设计法
1.
Study on recipe of high gloss PP with homogeneous design method;
均匀设计法用于高光泽聚丙烯的配方研究
2.
Choosing content of steroidal glycoside and yield of dry extract as indexes,the homogeneous design method was applied to optimize the semi-bionic extraction of steroidal glycoside from Geshanxiao.
以总甾苷含量和干浸膏得率为指标,采用均匀设计法确定隔山牛皮消中总甾苷的半仿生提取的最佳工艺条件为:3次煎水pH值分别为5。
3.
The SPE conditions were optimized by a homogeneous design method and a computer regress technology.
借助均匀设计法及计算机回归技术优化了固相萃取试验条件,得到了最佳固相萃取条件洗脱剂配比(正己烷与丙酮的体积比)为30∶1,洗脱体积为2mL,洗脱速率为4mL/min,上样速率为8mL/min。
6)  homogeneous design
均匀设计法
1.
The recipe optimization of thiourea curing system for chlorinated polyethylene(CPE) was conducted by homogeneous design and regression analysis.
应用均匀设计法和回归分析进行了氯化聚乙烯(CPE)的硫脲硫化体系配方优化研究。
2.
The optimum SPE conditions of the 4 PAEs were obtained by homogeneous design and computer regression modeling method,which are:the volume ratio of hexane to acetone 30 ∶1,eluent volume 2mL,eluent rate 4mL/min and sample rate 8mL/min.
借助均匀设计法及计算机回归建模优化技术对4种PAEs的固相萃取条件进行了设计与优化,得到的最佳固相萃取条件:洗脱剂配比(正己烷与丙酮的体积比)30∶1,洗脱体积2mL,洗脱速率4mL/m in,上样速率8mL/m in。
补充资料:均匀试验设计
分子式:
CAS号:

性质:用规格化的均匀设计表来安排试验。均匀设计表是中国数学家方开泰应用数论方法构造出来的。均匀试验设计最突出的优点是,实验点均衡地分布在整个试验区内,试验工作量比正交试验设计少的多。均匀设计表中各列的地位是不等的,试验数据失去了整齐可比性,因此,不能像正交试验设计那样用方差分析来处理数据,可用回归分析来处理数据。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条