1) liner board wastewater
箱纸板制浆废水
2) semi-bending chip
草浆纸板制纸箱
3) wastepaper pulp effluents
废纸制浆废水
1.
In this research,the treatment of wastepaper pulp effluents by photo-Fenton has been carried out under the irradiation of xenon,and the reaction kinetic model of TOC re- moval was investigated.
在氙灯照射下,采用光-Fenton工艺对废纸制浆废水进行了处理,并对其反应过程进行了动力学模型的研究。
2.
The efficiencies of treatment of wastepaper pulp effluents by different heterogeneous photo-catalytic oxidation processes were studied with experiments,and their efficiencies were compared and optimized.
研究了不同非均相光催化工艺去除废纸制浆废水总有机碳(TOC)的效果,并对其进行比较和优化。
4) boxboard paper production wastewater
箱板纸生产废水
1.
The design and operation of boxboard paper production wastewater treatment project were introduced.
介绍了箱板纸生产废水处理工程的设计及运行情况,采用物化预处理/生化处理/氧化塘/砂滤处理工艺,运行效果稳定,进水COD为1 500~2 500 mg/L,处理出水COD<300 mg/L,可全部回用到生产车间,实现了生产废水的零排放,污泥最终焚烧处置。
5) pulp and paper effluent
制浆造纸废水
1.
Tertiary decolorization treatment of pulp and paper effluent by using lignin-based flocculant
木质素基脱色絮凝剂深度处理制浆造纸废水
2.
The influence of the parameters on the efficiency of pulp and paper effluent treatment by using the technology is discussed.
介绍了SBR生化处理工艺的特点 ,讨论了以该工艺处理制浆造纸废水时各参数对处理效果的影响 ,并对部分关键设备的选型进行了比较和分析。
3.
According to the physical characteristics and fluid properties of pulp and paper effluent, the problems that need to pay attention to in pressurized long pipe system design and installations and their solutions were discussed from some aspects of establishing simplified Bernoulli equation, preventing system pressure impulse and water beating generation.
根据制浆造纸废水的物理特性和流体特性,从建立简化的伯诺里方程、防止系统压力脉动和水击产生等五个方面,论述有压长管系统设计施工中需要注意的问题和基本解决方法。
6) pulping and papermaking wastewater
制浆造纸废水
1.
The progress of bio-chemical treatment technology about pulping and papermaking wastewater is mainly summarized and some domestic and foreign instances of bio-chemical treatment are listed.
主要对制浆造纸废水的生化处理技术进展做了分析。
2.
In this paper,main treatment methods and new processes of pulping and papermaking wastewater treatment are introduced,some results and experiences of using the treatment techniques achieved in recent years are summarized.
列举了目前制浆造纸废水处理的主要方法及新方法,综述了近几年科研人员在各处理技术上取得的成果与经验,指出了清洁生产和零排放是最为理想的废水处理工艺和未来的研究重点。
补充资料：字型纸板
分子式：
CAS号：
性质：用于制作字型的专用纸板。通常分为三种。(1)湿字型纸板。即将木浆制造的薄页纸层在湿的状态下在母版面上模压成型。产品用于制作橡胶及塑料印版，现已不常用。(2)将含有酚醛树脂的纤维热压定性以制作字型。(3)铅版干纸型，用干纸板铸压成型以制造适应于铸造印刷版型。产品用于报纸和杂志及商业广告的印刷。通常使用化学木浆抄造，纸浆中配有滑石粉等填料。其重要性能是在制造铸模操作时，字型既要有一定的伸展性，又不能产生裂缝，不被压缩。还具有表面平滑、细腻，而且能够完全再现出原稿的细节。
CAS号：
性质：用于制作字型的专用纸板。通常分为三种。(1)湿字型纸板。即将木浆制造的薄页纸层在湿的状态下在母版面上模压成型。产品用于制作橡胶及塑料印版，现已不常用。(2)将含有酚醛树脂的纤维热压定性以制作字型。(3)铅版干纸型，用干纸板铸压成型以制造适应于铸造印刷版型。产品用于报纸和杂志及商业广告的印刷。通常使用化学木浆抄造，纸浆中配有滑石粉等填料。其重要性能是在制造铸模操作时，字型既要有一定的伸展性，又不能产生裂缝，不被压缩。还具有表面平滑、细腻，而且能够完全再现出原稿的细节。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条