1) automobile sheet
汽车板
1.
Synopsis:This paper reviews the development of annealing technology of cold rolling sheet,analyzes band passing technology and high speed cooling technology for high temperature annealing of automobile sheet,and briefly summarizes the production of cold rolling automobile sheet in Baosteel.
回顾了冷轧板退火技术的发展 ,对汽车板高温退火中的通板技术、高速冷却技术进行了分析和对比 ,简要总结了宝钢冷轧汽车板的生产情况。
2.
The development trends of automobile sheets abroad is reviewed from viewpoints of regulations and marketing.
从法规限制、市场需求以及钢厂的对策等方面阐述了近年来国外汽车板的发展趋势,简要介绍了国内汽车工业的发展及对汽车板的要求。
3.
OAbstract:This paper describes the development history of high-strength automobile sheet via the definition of high-strength sheet.
由高强度板的定义,叙述了高强度汽车板的发展历程,阐述了冷轧高强度汽车板IF钢和普通高强度钢板、冷轧TRIP钢、高强度DP钢、BH钢的研究状况和全球最大6家企业冷轧高强度汽车板品种的生产情况,对未来冷轧高强度汽车板的发展趋势进行了探讨。
2) Automobile steel sheet
汽车板
1.
The writers have introduced the global stratagem on automobile steel sheet of four iron & steel companies in Japan from technical collaborate, joint venture and materials supply.
从技术合作、合资建厂、原材料供应等方面介绍日本四大钢铁公司在汽车板领域的发展战
3) auto sheet
汽车板
1.
Under the condition of instant apparatus in WIS-CO, a kind of corrosion resistant deep-drawing auto sheet with higher strength has been developed in the performance of ene.
通过理论分析与生产实践,研究超低碳钢中Cu对<111>/ND织构的作用机制,探索铜含量与轧钢生产工艺对耐候型深冲汽车板强度及深冲性能的影响规律,在武钢现有设备条件下进行节能型工艺设计,研制开发出同时兼具深冲性、耐蚀性及高强度的汽车覆盖件用钢板,冲制车身表面美观、经久耐用,并通过减小板厚减轻车重与降低汽车能耗,以高效、节能的环境友好型特点而受到用户欢迎,具有广阔的应用前景。
2.
Nowadays the auto sheets are exposed to a threatening chanllenge of competition aroused by the light Al-Mg alloys and other substitutes.
当前汽车用钢正受到轻质铝镁合金及其他代用材的激烈挑战,本文结合理论分析与生产实践,研究轧钢生产工艺对烘烤硬化型深冲汽车板抗凹性能及深冲性能的影响规律,在武钢现有设备条件下,进行节能型工艺设计,研制开发出低成本、低碳耐候型烘烤硬化汽车板,使车身美观、耐用,并可减小板厚,减轻车重与降低汽车能耗,具有高效、节能的环境友好型特点。
4) automotive steel sheet
汽车板
1.
It is believed that the production of cold rolled flat products can nd the market demand only when the following measures are taken, such as attaching the importance to the automotive steel sheet, silicon steel sheet and tinned stee sheet, abiding by the priciple.
主张以汽车板、硅钢片和镀锡板为重点，按工艺质量一贯制的原则，产、销、研一体，科学管理，挖潜革新，合理布局，以期在现有水平的基础上更好地满足市场的要求。
5) automotive body sheets
汽车板
1.
Pre-aging and microstructures properties on 6000 series aluminium alloys for automotive body sheets;
6000系铝合金汽车板预时效及组织性能
2.
By means of SEM/energy spectrum,XRD and metallographic analysis,the effects of different alloying compositions on the constituents of some 6000-series aluminium alloys for automotive body sheets were investigated.
通过扫描电镜/能谱、X射线衍射以及金相分析,针对几种6000系汽车板铝合金,研究了不同的合金成分对结晶相的影响。
6) automobile roof
汽车顶板
1.
The formula and technique of the special material PP for automobile roof, manufactured by twin-screw extruder, were discussed.
探讨了使用双螺杆挤出机研制PP汽车顶板专用料的配方和工艺,并分析了增韧剂、矿物填料对最终产品性能的影响。
补充资料：军用汽车储备里程(见军用汽车使用管理)
军用汽车储备里程(见军用汽车使用管理)
initial drive of military motors
lunyong qiche ehubei lieheng军用汽车储备里程(mileage reserVe Ofmi一itary motors)见军用汽车使用管理。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条