原位增韧,In-situ Toughening,音标,读音,翻译,英文例句,英语词典

您的位置：首页 -> 词典 -> 原位增韧

1) In-situ Toughening 点击朗读

原位增韧

2) in-situ blending toughness 点击朗读

原位共混增韧

3) toughening chemical mechanism 点击朗读

增韧化学原理

4) ex-situ toughening 点击朗读

"离位"增韧改性

5) In-situ Reinforcement 点击朗读

原位增强

In-situ Reinforcement of Silicone Rubber; 点击朗读

有机硅橡胶原位增强新工艺

As a novel technology,the in-situ reinforcement of silicone polymer via sol-gel process is effective in promoting the dispersion of various fillers in polymer matrix and avoiding the agglomeration of fillers.

基于溶胶-凝胶原理的有机硅橡胶原位增强新方法有效地解决了填料在聚合物基体中的分散和团聚问题,可得到具有更好机械性能和耐热性能的有机硅材料。

The effects of the contents of different regulators including D-sorbital, mannose, galactose, glucose, and fructors on the growth of hydroxyapaptite crystal seeds were studied, and the crystal seeds obtained were then applied to the in-situ reinforcement of calcium phosphate cement.

在此基础上，进一步将合成的晶种应用于磷酸钙骨水泥（简称ＣＰＣ）的原位增强中，使水化产物晶体之间定向生长和排列，从而达到对ＣＰＣ进行增强的目的。

更多例句>>

6) in situ compatibilization 点击朗读

原位增容

PS-g-PA6/PA6 polymer alloys were prepared via in situ polymerization and in situ compatibilization on a mixer based on PS-MMA/CL(50/50)blend system.

用原位聚合 /原位增容的方法 ,在密炼机上将PS MMA/CL共混并引发CL阴离子聚合制备PS g PA6 /PA6的共混物。

The results showed that they are uncompatible between PPO,PA6 and POE; PPO g MA and POE g MA have in situ compatibilization effect on PPO/PA6 blends; PPO and POE are dispersed in PA6 continuous phase within the studied composition; and brittle.

结果表明，ＰＰＯ、ＰＡ６、ＰＯＥ三组份间互不相容；ＰＰＯｇ ＭＡ和ＰＯＥｇ ＭＡ分别增强了ＰＰＯ与ＰＡ６、ＰＯＥ与ＰＡ６之间的相容性，起到了原位增容的作用；在本研究的组份范围内，ＰＰＯ和ＰＯＥ分散在ＰＡ６的连续相中；共混体系的脆—韧转变受控于相间的界面强度和弹性体的用

Reactive compatibilization, or in situ compatibilization can be adopted to efficiently improved the compatibility between the polymer components, reduce the size of the dispersed particles and thus enhance the properties of the materials.

通过反应性增容(或原位增容)可有效地改善聚合物组分间的相容性,减少分散相粒子的尺寸,从而提高材料的性能。

更多例句>>

补充资料：氧化锆相变增韧陶瓷

分子式：
CAS号：

性质：一种利用氧化锆马氏体相变效应来改善脆性的陶瓷。氧化锆在由四方相向单斜相转变时(即马氏体相变)，伴随体积和形状变化。能吸收能量，减缓裂纹尖端的应力集中，阻止裂纹扩展，从而提高材料韧性，包括应力诱导相变增韧、裂纹弯曲增韧和微裂纹增韧。分为稳定氧化锆陶瓷(PSZ)、四方氧化锆多晶体陶瓷(TZP)和氧化锆增韧陶瓷(ZTC)三种。用于增强陶瓷基和金属基复合材料韧性。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

参考词条

原位增殖韧相增韧增韧原位增长率增韧增粘增强增韧

说明：双击或选中下面任意单词，将显示该词的音标、读音、翻译等；选中中文或多个词，将显示翻译。
	您的位置：首页 -> 词典 -> 原位增韧 1) In-situ Toughening 原位增韧 2) in-situ blending toughness 原位共混增韧 3) toughening chemical mechanism 增韧化学原理 4) ex-situ toughening "离位"增韧改性 5) In-situ Reinforcement 原位增强 1. In-situ Reinforcement of Silicone Rubber; 有机硅橡胶原位增强新工艺 2. As a novel technology,the in-situ reinforcement of silicone polymer via sol-gel process is effective in promoting the dispersion of various fillers in polymer matrix and avoiding the agglomeration of fillers. 基于溶胶-凝胶原理的有机硅橡胶原位增强新方法有效地解决了填料在聚合物基体中的分散和团聚问题,可得到具有更好机械性能和耐热性能的有机硅材料。 3. The effects of the contents of different regulators including D-sorbital, mannose, galactose, glucose, and fructors on the growth of hydroxyapaptite crystal seeds were studied, and the crystal seeds obtained were then applied to the in-situ reinforcement of calcium phosphate cement. 在此基础上，进一步将合成的晶种应用于磷酸钙骨水泥（简称ＣＰＣ）的原位增强中，使水化产物晶体之间定向生长和排列，从而达到对ＣＰＣ进行增强的目的。更多例句>> 6) in situ compatibilization 原位增容 1. PS-g-PA6/PA6 polymer alloys were prepared via in situ polymerization and in situ compatibilization on a mixer based on PS-MMA/CL(50/50)blend system. 用原位聚合 /原位增容的方法 ,在密炼机上将PS MMA/CL共混并引发CL阴离子聚合制备PS g PA6 /PA6的共混物。 2. The results showed that they are uncompatible between PPO,PA6 and POE; PPO g MA and POE g MA have in situ compatibilization effect on PPO/PA6 blends; PPO and POE are dispersed in PA6 continuous phase within the studied composition; and brittle. 结果表明，ＰＰＯ、ＰＡ６、ＰＯＥ三组份间互不相容；ＰＰＯｇ ＭＡ和ＰＯＥｇ ＭＡ分别增强了ＰＰＯ与ＰＡ６、ＰＯＥ与ＰＡ６之间的相容性，起到了原位增容的作用；在本研究的组份范围内，ＰＰＯ和ＰＯＥ分散在ＰＡ６的连续相中；共混体系的脆—韧转变受控于相间的界面强度和弹性体的用 3. Reactive compatibilization, or in situ compatibilization can be adopted to efficiently improved the compatibility between the polymer components, reduce the size of the dispersed particles and thus enhance the properties of the materials. 通过反应性增容(或原位增容)可有效地改善聚合物组分间的相容性,减少分散相粒子的尺寸,从而提高材料的性能。更多例句>> 补充资料：氧化锆相变增韧陶瓷分子式： CAS号：性质：一种利用氧化锆马氏体相变效应来改善脆性的陶瓷。氧化锆在由四方相向单斜相转变时(即马氏体相变)，伴随体积和形状变化。能吸收能量，减缓裂纹尖端的应力集中，阻止裂纹扩展，从而提高材料韧性，包括应力诱导相变增韧、裂纹弯曲增韧和微裂纹增韧。分为稳定氧化锆陶瓷(PSZ)、四方氧化锆多晶体陶瓷(TZP)和氧化锆增韧陶瓷(ZTC)三种。用于增强陶瓷基和金属基复合材料韧性。说明：补充资料仅用于学习参考，请勿用于其它任何用途。参考词条

©2011 dictall.com