说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 杀菌机
1)  sterilizer [英]['sterəlaɪzə(r)]  [美]['stɛrə'laɪzɚ]
杀菌机
1.
Application of industrial control computer in temperature control system of sterilizers;
工控机在杀菌机温度控制系统中的应用
2.
Electrochemical Sterilization of Cane Juice and the Juice Sterilizer;
压榨车间电化学杀菌及蔗汁杀菌机
2)  Sterilization mechanism
杀菌机理
1.
Study on the drying characteristics and sterilization mechanism in adsorption drying system;
吸附干燥系统干燥特性与杀菌机理研究
2.
In this paper,the recent progress in nano-TiO2 photocatalytic technique at home and abroad is introduced,including the mechanism of photocatalytic reaction,its sterilization mechanism and its toxicology.
主要介绍了关于半导体纳米TiO2光催化反应机制、杀菌机理及其毒理学的国内外研究进展,最后提出了其在今后发展过程中需要解决的一些问题。
3)  germicidal mechanism
杀菌机理
1.
Objective To study the germicidal mechanism of propolis-silver ion compound nanometer emulsion.
目的研究蜂胶-银离子复合纳米乳剂杀菌机理。
2.
Objective To study the germicidal mechanism of chlorine dioxide with Escherichia coli as the experimental object.
目的以大肠杆菌为对象,研究二氧化氯杀菌机理。
3.
In order to observe the killing effect of ortho-phthalaldehyde (OPA) on Candida albicans and to explore its germicidal mechanism, suspension quantitative germicidal test and transmission electronmicroscopic technique were used for the study.
为观察邻苯二甲醛对白色念珠菌的杀灭作用和杀菌机理 ,采用悬液定量杀菌试验和透射电镜技术进行了研究。
4)  sterilizing mechanism
杀菌机理
1.
Progress in preparation and sterilizing mechanism of electrolyzed oxidizing water;
酸性氧化电位水制备和杀菌机理的研究进展
5)  Bactericidal mechanism
杀菌机制
1.
Preparation of Cu~(2+)-loaded montmorillonite and its bactericidal mechanism against Escherichia coli;
Cu-MMT对细菌具有较强的杀灭活性,其杀菌机制:Cu-MMT与细菌发生吸附作用,使细菌细胞膜形态和通透性改变,胞内物外泄而死亡。
6)  bactericidal mechanism
杀菌机理
1.
niger and Staphylococcus aureus were carried out using as-synthesized nano-MgO samples and the bactericidal mechanism was also investigated.
subtilis的杀灭能力,进一步揭示了纳米MgO杀菌机理。
补充资料:RGTGH管式杀菌机系列普通型

 

应用:
应用于果汁,果浆等流体食品,物料在套管式热交换器中进行高温杀菌处理。该系列含有套管式杀菌机和列管杀菌机两种。

工作原理:
杀菌机是通过在高压下用循环热水30分钟来实现灭菌的,除菌后,系统逐步被降至生产温度,就可以进入生产阶段。
产品在经过前期处理后,进入杀菌机物料罐,输送泵将产品送入套管热交换单元进行预热。
最后在管式热交换器中进行加热,产品须在保温管中保温一定的要求时间以取得预定的杀菌效果。
产品在波纹管中利用热回收方式冷却至包装温度。
每个生产周期结束后,都要用碱液或酸对系统进行清洗。

设备组成及技术指标:
由物桶、套管式换热器、无级变速输送泵、保持器、密闭水桶、热水发生器、控制柜等组成。
采用镜面焊接技术,保持管道连接平滑,减少物料残留。
采用波纹管连接,减少热变形应力。
杀菌不足自动返回管路,确保系统无菌性。
无菌阀,冷却管路连接法蓝采用蒸汽保护。
采用热回收技术,提高热传输效率,节约能源。
液位,温度实时控制。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条