1) Ratio
注料比例
2) shot
注料
3) Castables
浇注料
1.
The effects of the grain size of fused corundum and amounts of magnesia,cement and silica micropowder as additives on the behavior of linear expansion of the corundum-spinel castables in sintering process were studied.
在750~1450℃的温度下测量了试样的线膨胀率,研究了电熔刚玉粒度、氧化镁、水泥及硅微粉加入量对刚玉-尖晶石质浇注料烧成过程中线膨胀率的影响。
2.
CO resistance of sol-gel bonded castables was studied together with the CO resistance of cement bonded castables.
研究了新型溶胶-凝胶结合耐火浇注料的抗CO侵蚀性能,同时也与传统的水泥结合耐火浇注料进行了对比试验,并从侵蚀前后的表观特征、理化性能和微观结构等多方面探讨了其CO侵蚀作用机理。
3.
Based on the Problems of heat shack rupturing and desquamating of firebricks on trolley of heat treatment furnaces,the technology measures were put forward irrigating trolley liner using castables with high resisting heat shack performance.
针对台车式热处理炉台车衬砖热震断裂脱落问题,提出了采用高抗热震性浇注料进行台车工作衬整体浇注的技术措施,根据热处理炉的实际工作条件,完成了浇注料的研制,并在实际应用中,取得了良好的应用效果。
4) castable refractory
浇注料
1.
The application of the castable refractory in the carbon kiln lining and the way of improving lining service life;
浇注料在炭素回转窑内衬施工中的应用及提高内衬使用寿命的途径
2.
The characteristic of castable refractory was advanced by analyzing the service conditions on Water-cooled Beam of heating furnace in this paper.
通过对加热炉水冷梁使用条件的分析,提出了该类浇注料应具有的特点。
3.
By the concrete index and using request of 1 375 ℃ high strength castable refractory, 1 204 ℃ heat insulating refractory, 1 260 ℃ heat insulating refracrory,1 09 3℃ heat insulating refractory and 1 316 ℃ Si castable, the castable refractory for CSP billet soaking furnace is researched, which is acquired the good using effect.
根据CSP薄板坯均热炉用1375℃高强度浇注料、1204℃隔热浇注料、1260℃隔热浇注料、1093℃隔热浇注料和1316℃熔合硅浇注料的具体指标和使用要求,结合国内耐火原料的特点,研制出了满足CSP薄板坯均热炉使用需要的耐火浇注料,达到了预期效果。
5) casting material
浇注料
1.
Research and application of the casting material reinforced by steel fibre;
钢纤维增强浇注料的研究与应用
2.
The synthesis of low relative molecular weight of poly(acrylate sodium)and application of them as dispersant on bauxite-based low-cement casting material were studied.
研究了低相对分子质量的聚丙烯酸钠合成及其作为分散剂在矾土基低水泥浇注料上的应用。
3.
The experience of successful application of new early-strengthening high-aluminium casting material to 650 rolling mill continuous oil combusting pusher-type heating furnace is described in this paper.
阐述了新型早强高铝质浇注料在６５０轧机燃油推钢连续式加热炉上应用的经验。
6) Injection Dosage
注料量
1.
The Application of Different Ratio of Insufficient Injection Dosage in Household Refrigerator;
介绍了家用电冰箱注料量的初始估算方法和不同比例注料技术在家用电冰箱发泡上的应用。
参考词条
补充资料：注道残料井
分子式：
CAS号：
性质：注塑成型用模具中设在主流道下端或分流道末端用以收集注口冷料用的孔穴。
CAS号：
性质：注塑成型用模具中设在主流道下端或分流道末端用以收集注口冷料用的孔穴。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。