1) solution mixing
溶液共混法
1.
Study on carbon canotubes /bisphenol a polycarbonate composites produced by solution mixing;
溶液共混法制备碳纳米管/双酚A型聚碳酸酯复合物的研究
2.
Polyurethane/carbon nanotube composites were prepared by solution mixing and their structures were characterized by FTIR.
采用溶液共混法制备了聚氨酯/碳纳米管复合材料,利用FTIR对其结构进行了分析,探讨了碳纳米管对复合材料力学性能、热稳定性能以及弹性回复率的影响。
3.
Carbon nanotubes(CNTs) were modified with acid,and polyurethane(PU)/CNTs composites were prepared by solution mixing or in-situ polymerization.
对碳纳米管(CNTs)进行酸改性,采用溶液共混法和原位聚合法制备了聚氨酯(PU)/CNTs复合材料,考察了CNTs对复合材料力学性能、热稳定性能和弹性回复率的影响。
2) solution blending
溶液共混法
1.
The surface of SiO2 nanocomposites was dispersed and modified by supersonic wave and silane coupling agent KH-570, and then blended with PET by solution blending to prepare PET/nano-SiO2 composites.
利用超声波、偶联剂KH-570对纳米SiO2进行了分散和表面改性,用溶液共混法制备了PET树脂/纳米SiO2复合材料。
3) solution co-blending method
溶液共混法
1.
Themechanism and main technology of directdispersing method, solution co-blending method and sol-gel method for preparing polymer/ inorganic nanoparticle composite were outlined.
概述了直接分散法、溶液共混法、溶胶-凝胶法等制备聚合物/纳米无机粒子复合材料的原理和主要工艺,重点介绍用超重力法和微乳液法制备纳米无机粒子。
2.
In this paper,solution co-blending method and different coupling agents were discussed to understand them how to effect the crystallization of PET.
文章探讨了溶液共混法和不同偶联剂对PET结晶能力的影响。
4) solution blended process
溶液共混法
1.
PZN-PZT particles were incorporated into PI polymer matrix homogeneously through solution blended process to form PZN-PZT/PI 0-3 composite thin films.
采用溶液共混法将PZN-PZT粒子均匀分散于PI基体中,制备了PZN-PZT/PI0-3型压电复合材料。
5) blend solution
共混溶液
1.
Study on rheological behavior of sodium alginate and its blend solution;
海藻酸钠及其共混溶液的流变性研究
6) solution blending
溶液共混
1.
Poly(β-hydroxybutyrate-co-β-hydroxyvalerate)(PHBV) biodegradable films were prepared by solution blending with different materials.
采用溶液共混方法来制备聚羟基丁酸戊酸酯(PHBV)生物降解薄膜,通过与不同材料共混,实现对PHBV薄膜的增韧改性。
2.
Ethyl cellulose(EC)/cellulose acetate(CA) blends were prepared by solution blending.
本文以冰醋酸为共溶剂,蒸馏水为共沉淀剂,通过溶液共混法制得EC /CA共混物,并对其共混相容性和热稳定性进行了研究。
3.
The polyvinyl alcohol/ethyl cellulose (PVA/EC) alloy was prepared by means of solution blending and liquid-solid phase inversion method.
采用溶液共混和液-固相转变法制备出聚乙烯醇/乙基纤维素(PVA/EC)合金和EC均质膜材料作为高效液相色谱柱填料。
补充资料：溶液共混
分子式：
CAS号：
性质：将各种原料聚合物组分加入共同溶剂中（或将原料聚合物分别溶解、再混合）或分别溶解，搅拌溶解混合均匀，然后加热蒸出溶剂或加入非溶剂共沉淀便获得聚合物共混物。它适用于易溶聚合物和某些液态聚合物的共混、或用于浇铸成型等聚合物共混物以溶液状态被应用（黏结剂、涂料等）的情况，也可作为机械共混的预备阶段。溶液共混在原则上是可行的，但实际上由于回收溶剂带来的麻烦和效率太低而未能在工业上采用。
CAS号：
性质：将各种原料聚合物组分加入共同溶剂中（或将原料聚合物分别溶解、再混合）或分别溶解，搅拌溶解混合均匀，然后加热蒸出溶剂或加入非溶剂共沉淀便获得聚合物共混物。它适用于易溶聚合物和某些液态聚合物的共混、或用于浇铸成型等聚合物共混物以溶液状态被应用（黏结剂、涂料等）的情况，也可作为机械共混的预备阶段。溶液共混在原则上是可行的，但实际上由于回收溶剂带来的麻烦和效率太低而未能在工业上采用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条