1) activated carbon-fiber felt
活性碳毡
1.
Microwave absorbing properties of the composites containing activated carbon-fiber felt dipole arrays(ACFFDAs) were investigated.
研究了含活性碳毡对称振子阵列吸波复合材料的微波吸收特性。
2) Pt/active carbon fiber
Pt/活性碳毡
1.
Pt/active carbon fiber catalyst was prepared by an impregnation method, and its performance for transforming carbon tetrachloride to chloroform was investigated in a high pressure static reactor.
采用浸渍法制备了Pt/活性碳毡催化剂 ,并在自制的高压反应釜上考察了该催化剂对四氯化碳加氢制氯仿反应的性能。
3) active carbon-fiber felt screen
活性碳毡电路屏
1.
Microwave absorbing properties of active carbon-fiber felt screens (vertical-arranged carbon fibers)/epoxy resin composites;
活性碳毡电路屏(直立碳纤维)/树脂复合吸波材料
4) activated carbon fiber (felt)
活性碳纤维(毡)
5) activated carbon felt
活性炭毡
1.
Modified process of activated carbon felt and its influence on removing effect of formaldehyde;
活性炭毡改性工艺及其对净化甲醛效果的影响
2.
The PAN-based preoxidated felt as raw materials was carbonized in N2 atmosphere, then was activated by vapor of H2O to abtain the precursor (activated carbon felt) of CMS.
以PAN系预氧毡为原料，在惰性气体N2中炭化后，用水蒸气活化制取分子筛炭织物的前驱体活性炭毡。
3.
The typical redox mediator anthraquinonedisulphonate(AQDS) is used as doping anion,pyrrole(PPy)as carrier,and activated carbon felt(ACF) as electrode basic material for preparing polypyrrole(PPy) composites,ACF/PPy/AQDS.
以典型氧化还原介体蒽醌-2,6-二磺酸钠(AQDS)为掺杂剂,以吡咯为载体,以活性炭毡(ACF)为电极基体材料制备了聚吡咯(PPy)复合材料,ACF/PPy/AQDS,并使用元素分析对其进行了表征。
6) carbon felt
碳毡
1.
Study on the electrochemical properties of carbon felt modified by PB and oxalic acid VRB application;
全钒液流电池用碳毡电极的改性研究
2.
To study the different wreck mechanism and provide the evidence for the application of C/C composites in structure material, the properties of bend,cut and compressing are studied on the C/C composites which are reinforced by carbon felt and 2.
为研究两种不同预制体增强的碳/碳(C/C)复合材料的损伤破坏机制差别,将为该材料应用于结构件提供依据,对碳毡及2。
3.
It was found during research that graphitization process can raise intensity of carbon-fibre, while moving average graphitization degree of carbon felt was 24.
研究发现,碳毡经过2300℃高温石墨化后,加权平均石墨度可达24。
补充资料：碳毡
分子式：
CAS号：
性质：碳纤维制成的毡，简称碳毡。以聚丙烯腈基碳毡为例，定积重量500g/m2和1000g/m2，纵向和横向强度(N/mm2)各为0.12，0.16和0.10，0.12，断裂伸长各为3％、4％和18％、16％，电阻率(Ω·mm)各为4～6，3.5～5.5和7～9，6～8，导热系数各为0.06W/(m·K)(25℃)，比表面积均>1.5m2/g，灰分皆小于0.3％，含硫量皆<0.03％。制法有：(1)碳短丝气流成网后针刺；(2)预氧丝毡碳化；(3)聚丙烯腈纤维毡预氧化和碳化。用作真空炉和惰性气体炉绝热材料、热的气体或液体和熔融金属滤材、燃料电池多孔电极、催化剂载体、耐腐蚀容器复合材料衬里和复合材料。
CAS号：
性质：碳纤维制成的毡，简称碳毡。以聚丙烯腈基碳毡为例，定积重量500g/m2和1000g/m2，纵向和横向强度(N/mm2)各为0.12，0.16和0.10，0.12，断裂伸长各为3％、4％和18％、16％，电阻率(Ω·mm)各为4～6，3.5～5.5和7～9，6～8，导热系数各为0.06W/(m·K)(25℃)，比表面积均>1.5m2/g，灰分皆小于0.3％，含硫量皆<0.03％。制法有：(1)碳短丝气流成网后针刺；(2)预氧丝毡碳化；(3)聚丙烯腈纤维毡预氧化和碳化。用作真空炉和惰性气体炉绝热材料、热的气体或液体和熔融金属滤材、燃料电池多孔电极、催化剂载体、耐腐蚀容器复合材料衬里和复合材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条