1) New type inoculated liquid
新型孕育剂
2) inoculant
[英][i'nɔkjulənt] [美][ɪn'ɑkjələnt]
孕育剂
1.
Determination of barium in steel-making inoculant by plasma atomic emission spectrometry;
ICP-AES法测定炼钢孕育剂中的钡
2.
By controlling the composition of molten iron and temperature, controlling amount of ferro-chromium, choosing appropriate orts and amount of inoculants and using Te-coating, the leakage rate could be reduced effectively.
通过控制铁液成分、浇注温度、Cr加入量,选择合适的孕育剂,使用碲涂料等综合控制手段,能有效降低缩松缺陷,防止气缸体渗漏现象。
3) inoculants
孕育剂
1.
Comparison Study on the Stabilization of Inoculants for Gray Iron;
灰铸铁稳定化孕育剂对比试验
2.
Effect of inoculants Ti and Zr on microstructure and mechanical properties of 2219 Al-Cu alloy welding
孕育剂Ti和Zr元素对2219铝铜合金焊缝组织和性能的影响
3.
Important measures to eliminate casting defects and improve cutting performance of castings can be done by adding suitable inoculants.
用合适的孕育剂进行孕育是消除铸件铸造缺陷和改善铸件切削性能的重要措施。
4) inoculation
[英][i'nɔkju'leiʃən] [美][ɪn,ɑkjə'leʃən]
孕育剂
1.
Determination of Total Amount of Rare Earth in the New Rare Earth-Chromium-Manganese-Silicon Inoculation by Spectrophotometry
分光光度法测定新型稀土铬锰硅孕育剂中稀土总量
2.
The influence of sulphur content on inoculation efficiency and the fading resistance of the inoculant No.
研究了铁水含硫量对孕育剂Ⅵ孕育效果的影响和孕育剂Ⅵ的抗孕育衰退特性。
3.
It is of great important significance that the application of inoculation.
扩大和推广孕育剂的应用具有十分重要的意义。
5) RECaBa inoculant
RECaBa孕育剂
1.
The influence of different addition amounts of RECaBa inoculant and Mo,Cu,Cr on the microstructure and mechanical properties was investigated by adopting main frequency induction furnace for iron melting and furan resin sand for making mould.
采用工频感应电炉熔炼和呋喃树脂自硬砂造型,研究了不同加入量的RECaBa孕育剂和Mo、Cu、Cr对高强度灰铸铁金相组织和力学性能的影响。
6) in-mold inoculation
型内孕育
1.
The effect of technical factors on melting process of ferrosilicon block used for in-mold inoculation was studied by using numerical simulation.
用数值模拟方法研究了工艺因素对型内孕育硅铁块熔化过程的影响 ,结果表明 ,硅铁块的几何尺寸、孕育块的安放位置、阻流浇道的位置及孕育块的成分等因素都影响孕育块的熔化过程 ,孕育块的几何尺寸影响最大 ;硅铁孕育块的熔化存在滞后 ,通过改进工艺条件可以使熔化滞后减小。
2.
A mathematical model is developed to simulate melting processes of ferrosilicon block used for In-mold inoculation.
建立了描述硅铁块在型内熔化过程中传输现象的数学模型,在固相、液相和糊状区中的流体流动、热量和溶质传输用统一方程描述,用控制容积差分法耦合求解质量、动量、能量和溶质守恒方程,计算结果与试验结果进行了对比,两者基本一致,表明所建立的数学模型和采用的计算方法能够用于模拟型内孕育硅铁块的熔化过程,实现型内孕育工艺的优化设计。
补充资料:孕育剂
incubater,inoculant:浇注以前,在一定的条件下向液体合金中加入一定量的促进异质形核的固态物质,以改变铸造合金的凝固过程,改善结晶组织,从而提高铸造合金性能,该固态物质叫孕育剂。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条