说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 分形复合油藏
1)  fractal composite reservoir
分形复合油藏
1.
This paper proposes mathematical model for well test analysis of perfectly describing the fractal composite reservoir with the well-hole storage and the skin effects and the three kinds of external boundary conditions (infinite boundary, constant pressure outer boundary and closed boundary).
针对分形复合油藏,建立了考虑井筒储集和表皮效应和三种外边界(无穷大、定压、封闭)条件下的试井分析模型;利用Laplace变换,在Laplace空间中得到了储层压力和井底压力分布的精确解;经全面和深入的分析,发现了描述该类油藏在三种外边界条件下的渗流特征的解式之间具有的相似结构,并作了进一步的讨论。
2.
The Theories and model of well testing analysis for a fractal composite reservoir have been discussed with non-Newtonian power law fluid flow.
 对不稳定渗流的数学模型进行了推导并建立了分形复合油藏不稳定渗流模型。
2)  fractal multilayer reservoir
分形合采油藏
1.
This paper established mathematic model for well test analysis of perfectly describing the fractal multilayer reservoir with the bottom-hole storage and the skin effects and the three kinds of outer boundary conditions (infinite boundary, constant pressure outer boundary, closed boundary).
针对分形合采油藏,建立了考虑井筒储集、表皮效应和三种外边界(无穷大、定压、封闭)条件下的试井分析模型;利用Laplace变换,在Laplace空间中得到了储层压力和井底压力分布的精确解;经深入分析,发现描述该类油藏在三种外边界条件下的渗流特征的解式之间具有的相似结构,并作了进一步的讨论。
3)  composite reservoir
复合油藏
1.
Pressure transient analysis of composite reservoir using the boundary element method;
任意形状复合油藏压力动态的边界元分析
2.
Productivity analysis of fractured wells in two-area composite reservoir by finite element method;
复合油藏压裂井产能的有限元分析
3.
This paper proposes mathematic model for well test analysis of perfectly describing the composite reservoir with the bottom-hole storage and the skin effects and the three kinds of outer boundary conditions(infinite boundary,constant pressure outer boundary and closed boundary).
针对复合油藏,建立了考虑井筒储集和表皮效应和三种外边界(无穷大、定压、封闭)条件下的试井分析模型;利用Laplace变换,在Laplace空间中得到了储层压力和井底压力分布的精确解;经全面和深入的分析,发现了描述该类油藏在三种外边界条件下的渗流特征的解式之间具有的相似结构,并作了进一步的讨论。
4)  compound reservoir
复合油藏
1.
Aimed at Gravity Override in a steam- injection processes, a well test analysis model of wedge - shaped compound reservoir is set up to simulate to slant steam front.
针对蒸汽驱中的重力超覆现象,提出采用楔状复合油藏模型来模拟倾斜蒸汽前缘建立考虑热损失的数学模型,通过拉普拉斯变换,得到两区复合油藏井底压力在拉氏空间的解。
2.
The compound reservoir model is used abroad in testing data interpreted.
实践表明,流体在复合油藏交接面间的流动存在着一定的附加阻力,尤其是渗透率低于5×10-3μm2的油藏,这种附加阻力的影响表现得更加明显。
3.
For the thermal recovery well test with steam injection,the compound reservoir model should be used to replace the actual reservoir,at the same time the heat losses to the surrounding formation must be considered.
对于注蒸汽热采试井必须采用复合油藏模型来代表实际油藏 ,同时还要考虑蒸汽在地层中的热损失。
5)  complex reservoir
复合油藏
1.
New calculation method of Fetkovich production - time standard curve for complex reservoir;
复合油藏Fetkovich产量-时间标准曲线计算的新方法
6)  composite reservoirs
复合油藏
1.
Study of pressure-transient characteristic for triple-medium composite reservoirs;
三重介质复合油藏压力动态特征研究
2.
The flow model of the triple-medium composite reservoirs and the type curves;
三孔均质径向复合油藏模型与试井样版曲线
补充资料:复合形法
分子式:
CAS号:

性质:求解最优化问题的一种算法。该法较为适合解决有约束优化问题。使用该法仅需比较目标函数值即可决定搜索方向,算法较简单,对目标函数的要求不苛刻。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条