1)  bond parameter function
键参数函数
1.
Through select elemental ionization power I and number of effective nuclear electricity Z~ as bond parameter to definite acid and alkali of oxide,Established bond parameter function of oxide f=I+4.
通过选用元素的电离势I及有效核电核数Z*为键参数来标度氧化物的酸碱性,建立了氧化物键参数函数f=I+4。
2)  bond parameters
键参数
1.
Y=a+bHs,where a and b are coefficients and constant for the physicoehemieal property the topological index of bond parameters,Hs,used to characterize the size,branching and shape of aliphafic amine.
采用改进键参数拓扑指数Hs,建立了脂肪胺的物化性质Y的定量式:Y=a+bHs,式中a,b是系数,对于某一物理化学性质为一定值。
2.
A model related the enthalpy was presented on the basis of the enthalpy of formation and com-ponent, bond parameters of Mg-Ni-M system.
在研究了Mg-Ni-M系三元合金生成焓与组成、键参数之间的关系上,建立了生成焓的数学模型,给出了影响生成焓的主要因素及影响程度的大小。
3.
A semi-empirical model related to enthalpy change is presented on the basis of the enthalpy change,component and bond parameters of V-based solid solution alloys.
在研究钒基固溶体贮氢合金的焓变、组成和键参数之间关系的基础上,建立了合金氢化反应焓变的半经验数学模型,得出影响生成焓的主要因素和影响程度。
3)  key parameters
关键参数
1.
The effects of key parameters on the performance of internal-circulation three-phase bio-fluidised bed (ITFB), a newly developed wastewater treatment technology, were discussed.
为了提高反应器的处理效率,综述了内循环生物流化床反应器在运行过程中关键参数对其处理效果的影响,指导实际处理过程中如何选择水力停留时间、载体和接种污泥投加量以使反应器快速启动,以及如何控制气含率、载体投加量和生物膜特性等参数。
2.
The property of activated carbon, content of H 2O and O 2,working temperature and space speed are proposed as the key parameters and an optimal working range for these key parameters is recommended, which provided an important reference to the actual industry design.
在工业中间试验的实测数据的基础上 ,分析了影响活性炭脱硫技术中脱硫效率的多种因素 ,并提出活性炭特性、H2 O与O2 含量工作温度以及空塔速度 4个参数 ,是控制活性炭烟气脱硫工艺的关键参数。
3.
In this paper the classification of corrosion factors and the selection of key parameters in corrosion modeling were studied.
研究了腐蚀因素的分类以及腐蚀模型中关键参数的选择等问题。
4)  bond parameter
键参数
1.
In this paper, atomic structure radius ni and bond parameter Xij based on atomic valence shell were defined.
在原子价电子层结构的基础上提出了原子结构半径和键参数的概念,并利用键参数研究碱金属卤化物晶格焓。
2.
Atomic structure radius i and bond parameter X ij based on atomic valence shell were defined, i=(n-3.
在原子价电子层结构的基础上提出了原子结构半径和键参数的概念 ,并将其引入分子连接性指数中 ,重新定义了顶点原子的连接性值 ,设计了适用于有机体系和无机体系的系列连接性指数 。
3.
The standard electrode potentials of the elements in the 1st, 2nd and 7th major groups and the transition elements in the 4th period have been related with the topological indices of element bond parameters and inorganic compound parameters respectively.
采用元素键参数拓扑指数关联了第一 ,二和七主族元素的标准电极电位 ;采用无机化合物键参数拓扑指数关联了第四周期过渡元素的标准电极电位 ,结果显示 ,键参数拓扑指数与元素的标准电极电位之间有较好的线性相关性 。
5)  key parameter
关键参数
1.
Point at AC solid-state relay,the method of reasonable selection solid-state relay,some problems that the applied circuit should be paid attention to the design and relevant interface circuit with a com pater barge is given is brought forward according to its several key parameters.
阐述了固态继电器的原理、结构、特点及交流直流固态继电器的适用范围 ,并针对交流固态继电器 ,提出了根据它的几个关键参数来合理选择固态继电器的方法、应用电路在设计上需要注意的一些问题以及给出了相应与计算机驳接的接口电路。
2.
Several key parameters affecting the traffic capacity are re demarcated,and the basic model is presented.
运用模拟的方法,对主路优先交叉口的通行能力进行了研究,从微观的角度对影响通行能力的各关键参数进行了新的标定,并建立了基本模型。
3.
This paper emphatically analyze the key parameters of X-ray real time image test,such as magnify multiple,sensitivity,image grey,resolution,source-object distance,tube-voltage,tube-current,dispersing X-ray,defect/damage size and position,etc,which will help to obtain the high quality image and provide the basic quality control items.
本文着重分析了复合材料X射线实时成像检测中的放大倍数、灵敏度、灰度、分辨率、射线源至被测件的距离、管电压和管电流、散射线、缺陷/损伤尺寸与位置等关键参数,为获得优质的图像提供了基本的质量控制指标。
6)  bond parameter
键参量
参考词条
补充资料:单叶函数的参数表示


单叶函数的参数表示
alent functions parametric representation of urn-

  单叶函数的参数表示1 parametric rePrese川tat咖of画、val以丘.rd佣s;napaMeTP“叨ecKOe npe八cTal明e““el 实现平面域到典型域(例如具有同心裂纹的圆盘)的共形映射的单叶函数(u州川enti切犯tion)的一种表示;通常以如下方式出现.选定单参数区域族Q‘,O(t0很小.当参数t连续变化时,可由此引出一些微分方程.最著名的是l为脚讹r方程(助wner eqUa石on)与L加汇哈r一Ky中apeB方程.在离散的情形—对格域Q:和自然数t—从f。到了r+‘,。=l,的转换由递推公式给出.这些公式与方程通常源于sch场arz公式(见tll)及其推广(见〔21).参数表示的另一个具有同样重要性的源泉是关于上述提到的区域族的Green函数G:(:,“‘)(“,z‘任Q,)的Hadamard变分(见[31,!4]).对于椭圆微分方程,Hada在团心方法亦称为不变嵌入法(Tnethod of mvariant如bedding)(见【5」).下面就最简单的(离散)情形展示参数表示、H往da几四rd变分及不变嵌入之间的联系, 设Q是复整数的一个集合(格域(btticedo-翅in))且设Green函数g。(:,:‘)是关于Q上所有实值函数“(z)组成的类R。上的D州c比t一伪u幽、泛函(Djric比t一伪u乡as ftm ctional) I Ir(。)二29(:‘)+艺艺p*(。)iv*。(z)l’ k,02‘Qo的一个极端点,此处 Q。二{“:z,:一l,:一i,Z一l一i‘Q}, V。g(z)=g(z)一g(:一l一i), V,g(:)“g(:一l)一g(:一i), p*(0)三1,p*(t+l)“p*(t)+Nj;:,N是自然数,占;是Kfoneeker记号,心‘二(k,,::),t二0,…。T一1,是某个数偶集合;毛:,二:=1,…,T}是Q:的边界,k‘=o或1.寻求泛函I,(g)的极值是一个二次规划问题.对于t和t+1的解的比较给出不变嵌人(HadaJ爪ard变分)基本公式(bas元for-m往巨of川、,ariantjmbedding(Hadamard城tr以泳刀1)): G,+l(:,z‘)二 一G!‘一”一告v*G!‘一,v*G!‘一”, (2)其中e,=N一’一v*,v*,G,(z。,z,)>o,记号v*,表示关于该Green函数第二变量的微分算子(1).已知G。(:,:‘)即可从(2)式逐步(递推)得到所有的函数G。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。