说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 堆垛
1)  stacking [英][stæk]  [美][stæk]
堆垛
1.
The Design of Carbon block Stacking Crane;
碳块堆垛天车的夹具设计
2.
The full-scale experimental method is used to study the characteristics and behaviors of fire and flame development of the simulated standard component of electrical household appliance in different rack and stacking forms unprotected by sprinklers.
采用实尺实验的方法,针对模拟家电类商品的标准组件,就商品货架摆放和堆垛摆放的不同形式,研究在无水喷淋保护的条件下火灾发展和火焰传播的特性。
3.
To handle the separating, cutting and stacking problems in production of playing card in China, pipelining mode involving auto separation with discal blade, auto-stacking with stacking framework was adopted distinct from traditional mode of punching separating, manual neatening and stacking.
针对国内扑克牌生产中的印后分切、堆垛问题,大胆突破国内原有的冲压分切、人工整理堆垛的生产模式,改为圆盘刀自动分切、堆垛机构自动堆垛的流水线生产模式,研制了扑克牌自动分切机。
2)  Pile [英][paɪl]  [美][paɪl]
堆垛
1.
The temperature and humidity distributing conditions of ammunition depot on the ground is tested,initial research on the ammunition quality change of different pile positions in the long-term storage is conducted for the different temperature and humidity.
测试地面弹药库房环境温湿度分布情况,初步研究由于温湿度差异的影响,长期储存过程中不同堆垛位置弹药质量变化情况;研究所得结论对我军弹药储存管理工作提出了新方法。
2.
Based on the actual fire characteristics in home electrical appliances emporium,the full-size fire experimental study was carried out with simulated typical assemblies of home appliances in shelved and piled forms.
根据家电商场火灾的实际特点,对货架和堆垛两种摆放形式的模拟家电标准组件进行了全尺寸的火灾实验研究。
3.
This paper conceives a digitizing pile based on the analysis of the characteristics of pack ammunition storage and management.
通过对箱装弹药储存管理特点的分析,提出了堆积管理数字化的构想,给出了典型的弹药堆垛结构算法模型,进行了弹药堆积管理软件的初步设计。
3)  piling [英]['pailiŋ]  [美]['paɪlɪŋ]
堆垛
1.
Study and design on the piling model of section steel;
型钢堆垛型式的设计研究
2.
Temperature distribution during wheel piling is simulated using the thermal analysis module as well as "element birth and death" and contact features of finite element analysis software ANSYS (Ver 6.
0的热分析模块以及“单元生死”和接触功能,成功地模拟了车轮堆垛过程的温度场,为等温过程温度场的模拟奠定了基础。
4)  depository loading
堆垛
1.
Treated as the bin packing problem, the depository loading problem of cool steel coils is discussed for the annealing shop of a cool steel rolling factory.
讨论某冷轧厂热处理车间冷卷入库堆垛问题 ,并将其归结为装箱问题进行研究。
2.
The depository loading problem of cool steel coils is discussed for the annealing shop of cool steel rolling factory of an iron and steel corporation, which is treated as bin packing problem of combinatorial optimization.
本文主要讨论了某钢铁公司冷轧厂热处理车间前库的冷卷入库堆垛问题,通过将其归结为组合优化中的装箱问题来进行研究。
5)  To heap into a raised mass.
堆堆集成垛
6)  stacking fault
堆垛层错
1.
The formation of twin structure depends on the slip of stacking fault for nucleating and extending.
孪晶结构的形成依靠堆垛层错的滑移运动而形核和扩展。
2.
Moreover, the stacking faults penetrate the reinforcement.
利用透射电镜和高分辨率透射电镜研究了原位合成钛基复合材料增强体 Ti B的堆垛层错结构 。
3.
Based on slip line and stacking fault appeared on the silicon surface,the dislocation theory is used to analyze the reasons of causing dislocation and stacking fault during the bending process and study their influence on the laser bending,according to the experiment of thin silicon laser bending.
基于开展的薄硅片长脉冲激光弯曲成形实验,针对弯曲样品表面产生的滑移线和堆垛层错缺陷,结合实验所用规格硅片弯曲角度不超过35°的现象,运用位错理论分析在弯曲过程中硅晶体产生位错、层错现象的原因以及位错对激光弯曲成形的影响。
补充资料:堆垛场
1.又称垛场。宋代指储存商货的库场。寄存商货者,对官办堆垛场支付垛地官钱,民营堆垛场支付垛地户钱。参阅《文献通考.征榷六》﹑《宋史.食货志下八》。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条