1) damping agent
阻尼剂
1.
Damping silicone rubber was prepared from damping agent.
以阻尼剂制备了阻尼硅橡胶,研究了阻尼剂的量、水解条件和生胶的苯基含量对阻尼硅橡胶性能的影响,结果表明:阻尼剂的量在一定范围内(不超过20份),随着量的增加,阻尼硅橡胶的性能不断提高;混炼胶以210℃×4 h水解处理得到的阻尼硅橡胶综合性能为好;低苯基生胶(LPVMQ)比甲基乙烯基生胶(VMQ)制备的阻尼硅橡胶阻尼系数显著提高,但中苯基生胶(MPVMQ)比LPVMQ制备的阻尼硅橡胶阻尼系数提高较小。
2.
The high damping silicone rubber was prepared from low phenyl silicone rubber,fumed silica,and self-synthesized damping agent.
以低苯基硅橡胶、气相法白炭黑、自制阻尼剂为原料,制备了高阻尼硅橡胶,并测试了高阻尼硅橡胶的阻尼系数、损耗模量和储能模量。
3.
The silicone rubber and the surface of fumed silica were modification by different damping agent,which can improve damping property of the silicone rubber.
以不同阻尼剂分别对硅橡胶主链和填料表面进行改性的途径制备了阻尼硅橡胶,分别通过DMTA和应力应变法对制备的阻尼硅橡胶进行了研究,结果表明:采用阻尼剂DA-1/DA-3=15/5并用的配方,硅橡胶的阻尼性能最优,综合性能最好。
2) damping imparting agent
阻尼赋予剂
1.
In this paper, the lastest research of damping materials are introduced, including the damping imparting agent, the piezoelectricity damping materials and the rare earths magnetic damping materials.
介绍了复合阻尼材料研究的最新进展,包括阻尼赋予剂、压电阻尼材料和稀土永磁阻尼材料等3种新型复合阻尼材料,同时评述了相关阻尼机理及阻尼性能的评价方法等。
3) damping solvent extraction method
阻尼溶剂抽取法
4) damping
[英]['dæmpiŋ] [美]['dæmpɪŋ]
阻尼
1.
Influence of damping layer to free damping processing structure;
阻尼层对自由阻尼处理结构的影响
2.
The conjugate gradient algorithm of variational damping and its capability analysis;
变阻尼共轭梯度算法及其性能分析
3.
The study on the resin matrix for winding the damping composite structural component;
适于缠绕阻尼复合材料结构件的树脂基体配方
5) Damp
[英][dæmp] [美][dæmp]
阻尼
1.
Finite Element Analysis on Viscoelastic Damped Control of Column Structure of a Machine Tool;
机床立柱的粘弹性阻尼控制有限元分析及研究
2.
Design for return oil damping of height - regulating hydraulic system;
调高液压系统回油阻尼设计
3.
The optimum design of active vibrat ion absorbers of the magnetic rheology damp;
主动式磁流变液阻尼动力吸振器的优化设计
6) damping capacity
阻尼
1.
The effect of small amounts Ca on mechanical properties and damping capacity of Mg-0.
6Zr合金力学性能和阻尼行为的影响。
2.
The internal friction measurements show that the introduction of interface layer not only improves the mechanical strength,but also significantly enhances the damping capacity that can be an order increase relative to the corresponding porous aluminum matrix in the temperature range of room temperature to 80℃.
内耗测量表明,引入该界面层以后,多孔铝的阻尼能力有了非常显著的提高,甚至有了量级的变化。
3.
It was indicated that the damping capacity of magnesium matrix composites was less than that of pure magnesium due to the addition of TiC, but .
阻尼研究表明,由于TiC的加入,复合材料的阻尼相对纯镁有所下降,但是热处理可以提高复合材料的阻尼性能。
补充资料：8105涂料印花黏合剂、HF自交型涂料印花黏合剂、印染黏合剂DE、SC-183涂料印花黏合剂、黏合剂7601
分子式：
CAS号：
性质：又称8105涂料印花黏合剂、HF自交型涂料印花黏合剂、印染黏合剂DE、SC-183涂料印花黏合剂、黏合剂7601或7601自交型黏合剂T/C。外观为带蓝色荧光的白色乳液。pH值5～6。含固量38%～40%。主要成分是丙烯酸丁酯、丙烯腈和N-羟甲基丙烯酰胺的共聚物。适用于棉及涤/棉混纺织物的涂料印花，高温熔烘(180℃下，15min)不泛黄。
CAS号：
性质：又称8105涂料印花黏合剂、HF自交型涂料印花黏合剂、印染黏合剂DE、SC-183涂料印花黏合剂、黏合剂7601或7601自交型黏合剂T/C。外观为带蓝色荧光的白色乳液。pH值5～6。含固量38%～40%。主要成分是丙烯酸丁酯、丙烯腈和N-羟甲基丙烯酰胺的共聚物。适用于棉及涤/棉混纺织物的涂料印花，高温熔烘(180℃下，15min)不泛黄。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条