1) high load
高负荷
1.
Experiences on operation with high load of 30 diaphragm electrolyzer;
30型隔膜电解槽高负荷运行的体会
2.
Technology optimization of DuPont polyester technical Plant high load production;
杜邦聚酯高负荷生产的工艺优化
3.
Comments on the operation of ammonia synthesis section with high load;
我公司氨合成工序高负荷运行浅析
2) heavy traffic
高负荷
1.
Cyclic transportation network model in heavy traffic;
高负荷循环交通网络模型
2.
under heavy traffic assumptions we obtain limit theorems for the netput process?idle time process and workload process.
为了寻求逼近解 ,本文用概率测度弱收敛理论对进行了研究 ,在高负荷的条件下 ,我们获得了网输入过程、闲时过程和负荷过程的极限定理 。
3.
The system was analyzed by adapting the Ornstein-Uhlenbeck process and Brownian motion process under heavy traffic assumptions.
在高负荷条件下,我们获得了系统中负荷过程和队长过程的收敛极限。
3) high loading
高负荷
1.
Through comparison of the high and low loading two stage bio-contact oxidation process, the paper showed the characteristics of high loading bio-contact oxidation process on organic removal efficiency and removal rate, effluent quality and stability, sludge producing and peeling off of thebiofilm, and the microorganism in the reaction.
通过高低负荷两级接触氧化法处理工艺的对比研究，揭示了高负荷接触氧化法在有机物去除率和去除速度，处理后出水水质及其稳定性、污泥的产生与生物膜的脱落过程、以及处理过程中的微生物的种类和活性等方面的特性，指出高负荷接触氧化法可以构成城市污水一级半处理过程的主体工艺。
2.
The characteristics of the treatment of municipal sewage by means ofactivated sludge at high loadings has been discussed in the present article.
本文论述了高负荷活性污泥法处理城市污水的特点。
4) high-load
高负荷
1.
Wih its high removal efficiency in the conventional items of BOD 5, COD and SS, AB process is an effective technique to treat high-load activated sludge and waste water.
AB工艺是高负荷活性污泥处理技术,作为处理高浓度城市污水的有效方法,在BOD5、 COD、SS等常规项目的去除上有着较好的效果,但对NH3-N、T-P的去除效果不大。
2.
A kind of phenomenon about high-load sludge are introduced, controlling of high-load sludge bulking were studied.
提出一类高负荷污泥膨胀现象,并对高负荷引起的污泥膨胀控制进行实验研究。
3.
Faced with the high-load and high-concurrency access visits,taking full account of multimedia material catalog information and system resources,this paper enhanced system performance by server cluster,database optimization and adding cach.
面对高负荷高并发的检索访问,在充分考虑了多媒体素材编目信息和系统资源的前提下,从服务器集群、数据库优化、缓存等方面提升系统性能,并给出了性能测试结果。
5) high load rate
高负荷率
1.
In recent years,under high load rate of the power,Nanjing Iron & Steel Group Company develops equipment potential,uses new technique,new process and new material,and strengthens management of operation and the equipment,which meet the needs of power consumption increasing gradually of the company.
近几年 ,南钢在高负荷率情况下 ,挖掘设备潜力 ,应用新技术、新工艺、新材料 ,加强运行和设备管理 ,同步满足了南钢不断增长的用电需求。
补充资料：高负荷滴滤池
分子式：
CAS号：
性质：一种好氧生物膜法,其构造和滤料与普通滴滤池相同,但水力负荷[10～30m3/(m3·d)]和有机负荷[BOD为0.8～1.0kg/(m3·d)]都比普通滴滤池高。运行时,将处理后的出水部分回流至滤池前,可提高滴滤池的处理效率,还有助于防止滴滤池积水,减少臭味与飞蝇的困扰。采用该法废水在滤池中停留时间短,有机物去除率达75％～90％,并较普通滴滤池占地少。
CAS号：
性质：一种好氧生物膜法,其构造和滤料与普通滴滤池相同,但水力负荷[10～30m3/(m3·d)]和有机负荷[BOD为0.8～1.0kg/(m3·d)]都比普通滴滤池高。运行时,将处理后的出水部分回流至滤池前,可提高滴滤池的处理效率,还有助于防止滴滤池积水,减少臭味与飞蝇的困扰。采用该法废水在滤池中停留时间短,有机物去除率达75％～90％,并较普通滴滤池占地少。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条