1) zinc-plating steel
镀锌钢材
1.
The production process ot zinc-plating steels and coating film system in common use were introduced.
介绍了镀锌钢材的生产过程及常用的涂层体系,重点介绍了涂漆前表面前处理的方法。
2) galvanized steel
热镀锌钢材
1.
Corrosion inhibition and quantum chemistry studies of hot dip galvanized steels in diluted HCl solutions;
热镀锌钢材在稀盐酸中的缓蚀和量子化学研究
3) Hot-dip galvanized steel
热镀锌钢
1.
Electrochemical corrosion behaviors of hot-dip galvanized steel in simulated concrete pore solutions;
热镀锌钢在模拟混凝土孔隙液中电化学腐蚀行为
2.
Corrosion resistance of silane/silicate composite films on hot-dip galvanized steel
热镀锌钢表面硅烷/硅酸盐复合膜的耐蚀性能研究
4) Galvanized steel
镀锌钢
1.
A cerium conversion coating was prepared on zinc and galvanized steel by chemical conversion treatment of specimens in an aqueous solution of 0.
通过在Ce(NO_3)_3水溶液中对锌和电镀锌钢进行化学转化(钝化)处理,在试样表面形成了铈转化膜。
2.
By analyzing the performance and comparing the minimum section area of grounding electrode of copper with galvanized steel,the connection method with exothermic fireclay fusion splicing of copper grounding electrode with good performance is introduced.
对铜与镀锌钢的性能和接地体最小截面进行比较分析;介绍了效果良好的铜接地体的放热火泥熔接的连接方式;提出铜材接地网实施的优化措施,并结合工程实践,对铜材接网及镀锌钢接地网进行了技术经济比较。
3.
Aim to application of aluminium alloy and galvanized steel for automobile industry, the dissimilar joint between aluminium alloy and galvanized steel sheet during cold metal transfer brazing was analyzed.
本文针对汽车工业中铝合金和镀锌钢板的轻量化结构制造,对铝合金与镀锌钢薄板搭接件进行了异种材料冷金属过渡(CMT)钎焊,研究了工艺参数对焊缝表面成形、接头组织结构及力学性能的影响。
5) galvanizing steel wire
镀锌钢丝
1.
To introduce the production technology and process of galvanizing steel wire for bridge cable with homemade wire rod.
介绍国产盘条生产桥梁缆索用镀锌钢丝的工艺技术、制造过程,分析研究有关技术要点,指出国产82B盘条的化学成分、理化性能及夹杂物含量与进口盘条相差不大,通条性和稳定性有待进一步提高。
2.
To research the production process of low relaxation galvanizing steel wire for bridge cable.
研究桥索用低松弛镀锌钢丝生产工艺,从生产过程、张力控制、冷却特点、加热功率与延伸率、生产线的控制以及原材料选用等方面,详细阐述获得内在质量和外观品质均符合市场需求的桥索用镀锌钢丝的方法和途径。
6) galvanized sheet steel
镀锌钢板
1.
The commercial hot-dip galvanized sheet steel was investigated for its corrosion behavior in three different seawater zones in Qingdao with electrochemical measurement,weight loss test and SEM.
开展了热镀锌钢板在青岛不同海水区带的实海腐蚀测试,并利用电化学测试、失重腐蚀测试和扫描电镜研究了镀层的海水腐蚀行为。
2.
With the rapid development of Chinese economy, demands for galvanized sheet steels increased significantly because of the rapid development of construction and automotive industry during the last decade.
随着国内经济的持续稳定发展,在过去的10年中,由于建筑和汽车行业的快速发展,对镀锌钢板的需求持续旺盛。
3.
occured in forming and after coating of the prephosphating galvanized sheet steel,this paper demonstrates analyses on all kinds of influential factors happened in production and forming in detail,after that,provides some solutions on purpose.
为解决预磷化镀锌钢板加工成形、涂装后易出现的条影、针孔、粗糙等问题,对其生产及加工成形过程中的各种影响因素进行了详细分析,并有针对性地提出一般的解决办法。
补充资料：表面合金化镀锌钢板
表面合金化镀锌钢板
surface-alloyed galvanized steel sheet
裹面合金化镀锌钢板(surfaee一alloyedgalvanized steel sheet)由普通镀锌钢板经合金化处理而成的钢板。其镀层表面呈银白色，具有良好的耐蚀性、加工工艺性和涂装性，可焊性也比普通镀锌钢板好。其镀层结构主要受扩散、退火温度、时间、镀锌层厚‘望以及镀液中锌含量等因素的影响。不同的工艺条件，可使合金化层形成不同的相结构。合金化镀锌钢板的使用性能与镀层结构有密切关系。铁一锌合金化层中，铁的含量对合金化层的耐蚀性、涂装性及加工性有重要影响。从综合性能考虑，以镀层中含铁8%时为最佳。 合金化镀锌钢板可简化表面处理工序.省去酸洗、喷砂等工序，有较好的经济效益。在农业机械产品上的应用有:施肥机械、施肥播种机、中耕施肥机的肥料箱和种子箱:手扶拖拉机的带轮罩壳等薄板件;金属粮仓的仓体、仓盖等;种子加工机械的窝眼筒、筛板等;农用汽车的薄板件;谷物和茶叶烘干机的薄板件等。(王广扬)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条