1) shell and cover of alkaline storage battery
碱性蓄电池壳盖
1.
The effects of materials,forming tech- niques,design of injection-molded products,design of the mould are fully analyzed according to the thermoplas- tics such as E/P,ABS,PA,AS,MBS which are used for producing shell and cover of alkaline storage battery.
介绍了塑料冲击强度的概念,并针对碱性蓄电池壳盖所用的几种热塑性塑料如(乙烯-丙烯)共聚物、(丙烯腈-丁二烯-苯乙烯)共聚物、尼龙、(丙烯腈-苯乙烯)共聚物、(甲基丙烯酸甲酯-丁二烯-苯乙烯)共聚物具体分析了材料、成型工艺、制品设计、模具设计对冲击强度产生的影响,给出了提高冲击强度的方法。
2.
The effects of materials, forming techniques, design of the mould are fully analyzed according to the thermoplastics such as E P, ABS, PA, AS and MBS which are used for producing shell and cover of alkaline storage battery.
讨论注塑制品内应力的分类及产生机理,并针对碱性蓄电池壳盖所用的几种热塑性塑料如(乙烯/丙烯)共聚物、(丙烯腈/丁二烯/苯乙烯)共聚物、尼龙、(丙烯腈/苯乙烯)共聚物、(甲基丙烯酸酯/丁二烯/苯乙烯)共聚物具体分析了材料、成型工艺、模具设计对制品内应力的影响,给出了减小内应力的控制方法,提出了制品内应力的检验及消除方法。
2) alkaline battery case
碱性蓄电池钢壳
3) storage battery shell and cover
蓄电池壳盖
1.
Block copolymerization polypropylene (PP1340) was chosed to produce storage battery shell and cover by injection molding through product designing, mould designing, forming techniques etc.
采用国内批量生产的嵌段共聚聚丙烯(PP1340),通过制品设计、模具设计和工艺设计,采用注射成型工艺研制出PP蓄电池壳盖。
4) alkaline storage battery
碱性蓄电池
1.
Influence of ambient temperature on charge efficeiency of alkaline storage battery;
温度对碱性蓄电池充电接受能力的影响
2.
Combining the characteristics of the transparent plastic shell of alkaline storage battery the process and method of the product were analysed.
结合碱性蓄电池透明塑料壳的特点,分析了碱性蓄电池透明塑料壳制造的过程与方法,从成型工艺过程及成型工艺条件的选择与控制方面进行了讨论。
3.
The characteristics of particular engineering plastics polysulfone(PSU) are presented, and the PSU shell body and cover of alkaline storage battery are formed by injection molding.
介绍特种工程塑料聚砜(PSU)的特性,采用注射成型工艺制备了碱性蓄电池壳体、壳盖。
5) alkaline battery
碱性蓄电池
1.
Ni(OH)2 is widely used as an positive active material for rechargeable alkaline battery.
氢氧化镍是碱性蓄电池的正极活性物质,为了改善镍系列电池的性能,合成了掺杂α Ni(OH)2,它具有较高的放电平台,且放电曲线平坦,放电容量高,在碱性溶液中结构稳定。
2.
It was good for using as positive active material of alkaline battery.
适宜于碱性蓄电池的活性物质。
补充资料：蓄电池槽
分子式：
CAS号：
性质：又称蓄电池槽。为汽车、机车、叉车等车辆起动、照明提供直流电源的蓄电池的容器。一般由硬质橡胶或塑料制成。根据槽的个数可分为单槽型、三槽型和六槽型等。由胶壳、胶盖、胶垫和液孔帽四部分组成。
CAS号：
性质：又称蓄电池槽。为汽车、机车、叉车等车辆起动、照明提供直流电源的蓄电池的容器。一般由硬质橡胶或塑料制成。根据槽的个数可分为单槽型、三槽型和六槽型等。由胶壳、胶盖、胶垫和液孔帽四部分组成。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条