1) curvature
[英]['kɜ:və,tʃʊə, -tʃə] [美]['kəvə,tʃʊr, -tʃɚ]
弯曲度
1.
Study of canal curvatures in the roots of first mandibular molars;
下颌第一恒磨牙根管弯曲度的研究
2.
Effect of process parameters on curvature of PC bar has been investigated The results show that the cooling way,the straightening,the control of tension,the place and the number of the fixed position are the main factors in influence on curvature of PC bar According to the test,the present paper introduces the solution of keeping little curvature of PC ba
研究了工艺参数对国产ＰＣ钢棒弯曲度的影响。
3.
To improve the measuring precision of photoelectronic measurement system for curvature (important status parameter of cannon),a real-time distortion correction method with concentric circles as onsite standard is proposed and a set of measuring apparatus with self-center adaptation is designed.
为了提高光电测量系统对火炮重要静态参数——弯曲度的测量精度,提出了一种基于同心圆现场定标的实时畸变校正方法,并设计了一套自定中测量装置。
2) straightness
[英]['streitnis] [美]['stretnɪs]
弯曲度
1.
Measurement of cannon barrel straightness based on CCD;
基于CCD的身管弯曲度的测量
2.
The PSD method is presented to measure gun barrel straightness.
文中采用了PSD法测量身管弯曲度,阐述了测量原理和弯曲度检测仪的整体研制方案,该系统经过样机测试,表明该系统测量精度高,误差在0。
3.
The principle of the testing the straightness of straight tubes is introduced in this paper, and the theoretic straightness model of straight tube is set up, whose spectrum is provided.
简要介绍ＰＳＤ法测量直管弯曲度的原理，建立了直管弯曲度模型，并利用频谱分析的方法给出了该模型的频谱分析，并根据误差限确定了优化步长，为简单有效地测量提供了依据。
3) bending
[英][bend] [美][bɛnd]
弯曲度
1.
A Digital Demonstrator for the Measuring of the Degrees of Bending and Twisting of An Engine Connecting Rod;
发动机连杆弯曲度和扭曲度的数字检测装置
2.
The hardware configuration of the bending test system based on PSD(position sensing detec- tor)is presented in the paper.
给出了基于 PSD(position sensing detector)传感器的弯曲度测量系统的基本硬件结构。
4) camber
[英]['kæmbə(r)] [美]['kæmbɚ]
弯曲度
1.
An axle camber measure device is developed based on AVR microcontroller and raster sensor.
车轴的弯曲度是决定产品质量的一个重要指标,利用AVR ATmega系列单片机和光栅传感器设计了一种车轴弯曲度检测装置。
5) degree of curvature
弯曲度;曲度
6) bending rigidity
弯曲刚度
1.
Discussion on bending rigidity anisotropy of fabrics;
织物弯曲刚度各向异性探讨
2.
Bending deformation and bending rigidity of mechanical components;
机械构件的弯曲变形与弯曲刚度
3.
Approach to calculating bending rigidity of rubber-reinforced track of tractors and its experimental verification;
拖拉机橡胶钢筋履带弯曲刚度计算方法与试验验证
补充资料：弯曲度
弯曲度
curvature
wanqudu弯曲度(eurvature)长条轧件(型、棒、管材)在长度方向上的弯曲程度。每米长度上弯曲的弦高为每米弯曲度;总长度弯曲的总弦高同总长度的比为总弯曲度。各类轧件的弯曲度规定在产品标准中。造成金属材弯曲的原因是热加工或热处理时冷却速度不均，收缩不一致;冷却前轧件未放平直，运送过程中弄弯等.防止或纠正的方法主要是改进冷床结构和吊运工具，改善包装方式。出现弯曲后最有效的纠正办法是通过矫直机矫直。 (崔峰)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条