1) wear resistance
磨损性
1.
Influence of adding Mo on microstructure and wear resistance of TiC-based metal ceramic coatings;
添加Mo对TiC金属陶瓷涂层组织和磨损性能的影响
2.
The microstructure and wear resistance of SiC/Ni-based alloy coatings on 45 steel were analyzed by scanning electron microscope and friction machine.
采用扫描电子显微镜、盘销式摩擦磨损试验机等方法对45钢表面SiC/N i基合金激光熔覆层的组织和磨损性进行了试验分析。
3.
Optimum screw assemble can increase the proportion of long fibers in the resin, improve the reinforced effect; increase the wear resistance of CFRPA and lower the rub coefficien.
通过优化螺杆组合,研究了CFRPA复合材料中碳纤维的长度分布对其力学性能的影响,用MM—200磨损试验机测试了CFRPA复合材料的磨损性能。
2) abrasion
[英][ə'breɪʒn] [美][ə'breʒən]
磨损性
1.
The criteria for determination of viscosity,abrasion and explosiveness of coal are discussed in detail,and flowrate,temperature and pressure are determined as specified in the applicable design standards for design of powder conveyance pipelines.
阐述了煤质的粘结性、磨损性和爆炸性的判别条件,根据有关设计标准对送粉管道设计中设计流速、设计温度和设计压力进行了确定,强调送粉管道保温和油漆对送粉管道的保护作用,并确定其使用范围,从而有效地防止送粉管道运行时故障的发生,保证锅炉制粉系统安全经济运行。
3) abrasiveness
[英][ə'breisivnis] [美][ə'bresɪvnɪs]
磨损性
1.
Soot system of fluidized bed boiler has high density by 200~300g/nm3, high humidity and mixed components, so the abrasiveness to the decontamination system cannot be ignored.
沸腾炉烟尘含尘浓度高达 2 0 0～ 30 0 g/m3,并且温度高 ,成分杂 ,其对净化系统的磨损性不容忽视。
4) abrasiveness
[英][ə'breisivnis] [美][ə'bresɪvnɪs]
磨损性;磨损度
5) wear behavior
磨损性能
1.
Effect of laser treatment on wear behavior of 4Cr3Mo2NiVNb steel;
激光处理对4Cr3Mo2NiVNb钢磨损性能的影响
2.
Study on microstructure and wear behaviors of MoS_2/TiC/Ni composite wear-resistant coating by laser cladding;
激光熔覆MOS_2/TiC/Ni减摩耐磨复合涂层组织及磨损性能的研究
3.
Sliding friction and wear behavior of the plasma sprayed Cr_2O_3 coating by ion implantation were studied at ambient condition on a pin-on-disc tester.
采用离子注入技术对Cr2O3涂层表面进行氮离子注入处理,用俄歇电子能谱仪、微区X射线衍射仪及X射线光电子能谱仪分析氮离子注入改性层的相组成及其氮元素沿层深的浓度分布,用销-盘式摩擦磨损试验机考察了注入前后Cr2O3涂层的磨损性能,用扫描电子显微镜观察其磨痕表面形貌及摩擦界面间的物质转移。
6) wear characteristics
磨损特性
1.
The wear characteristics of SiC_P/ZrO_2MoSi_2 nanocomposite ceramic were analyzed through wear comparison tests under lubrication free conditions.
用磨损对比试验对无润滑条件下SiCP/ZrO2-MoSi2纳米复合陶瓷的磨损特性进行了分析。
2.
Experiment and field tests results obtained by the anthors as well as by other reseachers were cited to discuss the wear resistance and hardness of the bond,the wear characteristics of both the bond and the tool.
文中通过试验和引用若干试验、锯切数据,着重对结合剂的耐磨性和硬度、结合剂的磨损特性和工具的磨损特性、与工具性能相关的主要物理性能进行了讨论。
3.
Results of an experimental invstigestigation on the wear characteristics of three types of heat transfer tubes, i.
对光滑圆管 ( O-T管 )、高频焊螺旋翅片管 ( HF-T管 )及镍基渗层钎焊螺旋翅片管 ( HF-T-NL管 )的磨损特性进行了实验研究 ,确定了各种管子的磨损量及磨损部位 ,并对其抗磨损性能进行了比较。
补充资料：连续性与非连续性(见间断性与不间断性)
连续性与非连续性(见间断性与不间断性)
continuity and discontinuity
11an父ux泊g四f“山。麻以角g、.连续性与非连续性(c。nt，n琳t:nuity一)_见间断性与不间断性。and diseo红ti-
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条