1) acrylate-terninated polyurethane
丙烯酸封端聚氨酯
2) acrylate-teminated polyurethane
丙烯酸酯封端聚氨酯
3) acrylate terminated
丙烯酸酯封端
1.
Two kinds of acrylate terminated liquid polysulfide (AcryLP3, AcryLP2) with low and high molecular weight respectively have been synthesized by reacting EPLP with acrylic acid.
以ＥＰ－ＬＰ为原料，与丙烯酸加成反应，制备相应分子量丙烯酸酯封端的聚硫橡胶（Ａｃｒｙ－ＬＰ－３、Ａｃｒｙ－ＬＰ－２）。
4) polyurethane-acrylate
聚氨酯丙烯酸酯
1.
A new kind of polyurethane-acrylate macromonomer was synthesized by IPDI,HEMA,PEG and EG,then it was copolymerized with methyl methacrylate(MMA),forming a novel amphiphilic polymer which contained hydrophobic and hydrophilic chains.
利用异佛尔酮-二异氰酸酯(IPDI)、聚乙二醇(PEG)、甲基丙烯酸-β-羟乙酯(HEMA)和乙二醇(EG)合成了一种新型的聚氨酯丙烯酸酯大分子单体,并进一步与甲基丙烯酸甲酯(MMA)聚合,制备了一种既含有相对疏水链段、又含有相对亲水链段的两亲聚合物。
2.
The castor oil polyurethane-acrylate hybrid emulsion (PUA) was prepared by the emulsion co-polymerization of castor oil polyurethane dispersion and methyl methacrylate (MMA).
采用甲基丙烯酸甲酯 (MMA)与蓖麻油水性聚氨酯乳液共聚反应制备聚氨酯丙烯酸酯 (PUA)复合乳液 ,研究了蓖麻油水性聚氨酯性能、MMA添加量、引发剂种类和聚合温度对PUA复合乳液及涂膜性能的影响 ,并应用傅里叶红外光谱 (FTIR)测定反应产物的结构 。
3.
Hybrid emulsion of castor oil polyurethane-acrylate(CPUA) was prepared by co-polymerization of castor oil polyurethane with methylacrylate(MMA).
采用甲基丙烯酸甲酯(MMA)与蓖麻油水性聚氨酯共聚反应制备蓖麻油聚氨酯丙烯酸酯(CPUA)复合乳液,研究了蓖麻油添加量、MMA添加量和引发剂种类对合成CPUA复合乳液及涂膜性能的影响,并应用傅立叶红外光谱 (FT-IR)测定反应产物的结构。
5) polyurethane-acrylate
聚氨酯-丙烯酸酯
1.
Synthesis of waterborne polyurethane-acrylate modified with epoxy resin;
环氧树脂改性聚氨酯-丙烯酸酯乳液的合成
2.
Preparation of waterborne polyurethane-acrylate adhesive;
水性聚氨酯-丙烯酸酯粘合剂的研制
3.
Synthesis and characterization of UV-curable waterborne polyurethane-acrylate coatings;
紫外光固化水性聚氨酯-丙烯酸酯涂料研究
6) acrylate-polyurethane
丙烯酸酯-聚氨酯
补充资料：一封
1.古以十万平方里为"一封"。 2.指单峰(驼)。 3.表数量。用于书信等封缄之物。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条