1) acryloyloxyethyl trimethyl ammonium chloride
丙烯酰氧乙基三甲基氯化铵
1.
The triadic copolymer of starch,acrylamide,and acryloyloxyethyl trimethyl ammonium chloride was synthesized by aqueous solution polymerization and the initiator MT-1.
用自制的引发剂MT-1,通过溶液聚合反应,制备了淀粉、丙烯酰胺(AM)、丙烯酰氧乙基三甲基氯化铵(DAC)三元共聚物。
2.
A new polymer materials——cationic flocculant P(AM-DAC-DMDAAC) was synthesized by aqueous solution polymerization using acrylamide(AM) as the molecular backbone,acryloyloxyethyl trimethyl ammonium chloride(DAC) and dimethyl diallyl ammonium chloride(DMDAAC) as the cation group.
以丙烯酰胺(AM)为分子骨架,丙烯酰氧乙基三甲基氯化铵(DAC)和二烯丙基二甲基氯化铵(DMDAAC)为阳离子单体,通过水溶液共聚合的方法,合成了一种新型高分子材料——阳离子絮凝剂P(AM-DAC-DMDAAC)。
3.
In this article, a co-polymer of starch, acrylamide( AM) and acryloyloxyethyl trimethyl ammonium chloride( DAC) had been prepared in a inverse emulsion system using sodium sulphite anhydrous and ammonium persulfate as initiator.
以无水亚硫酸钠(Na2SO3)和过硫酸铵[(NH4)2S2O8]为引发剂,通过反相乳液聚合制备了淀粉/丙烯酰胺(AM)/丙烯酰氧乙基三甲基氯化铵(DAC)三元共聚物,讨论了乳化剂种类、引发剂用量、反应温度和反应时间对反应产物的影响,确定了最佳反应条件:选用OP-10与Span-80复配乳化剂,引发剂用量为0。
2) acryloxyethyl-trimethylammonium chloride
丙烯酰氧乙基三甲基氯化铵
1.
Copolymer P(AM-DAC) was produced from acrylamide(AM) and acryloxyethyl-trimethylammonium chloride(DAC) by aqueous solution polymerization.
在氧化还原引发剂作用下,通过水溶液聚合制备了丙烯酰胺(AM)与丙烯酰氧乙基三甲基氯化铵(DAC)的共聚物P(AM-DAC)。
3) acryloxyethyl trimethylammonium chloride
丙烯酰氧乙基三甲基氯化铵
1.
A cationic copolymer was synthesized with acryloxyethyl trimethylammonium chloride(DAC) and acrylamide(AM) by inverse emulsion polymerization.
以丙烯酰氧乙基三甲基氯化铵(DAC)和丙烯酰胺(AM)为原料,通过反相乳液聚合技术,合成阳离子高分子聚合物乳液。
2.
It is studied in the laboratory that a cationic copolymer was synthesized with acryloxyethyl trimethylammonium chloride(DAC) and acrylamide(AM) by inverse emulsion polymerization.
在实验室条件下,以丙烯酰氧乙基三甲基氯化铵(acryloxyethyl trimethylammonium chloride,DAC)和丙烯酰胺(acrylamide,AM)为原料,通过反相乳液聚合技术,合成阳离子高分子聚合物乳液。
4) methylacryloyloxyethyl trimethylammonium chloride
甲基丙烯酰氧基乙基三甲基氯化铵
1.
0)G dendrimer was modified to polyamide-amine-methylacryloyloxyethyl trimethylammonium chloride(PAMAM(4.
通过M ichael加成反应,用甲基丙烯酰氧基乙基三甲基氯化铵(DMC)对4。
5) methylacrylethyl trimethylammonium chloride
甲基丙烯酰氧基乙基三甲基氯化铵(DMC)
6) methacryloyloxyethyltrimethyl ammonium chloride
甲基丙烯酰氧乙基三甲基氯化铵
1.
Cationic polyacrylamide was synthesized by aqueous solution polymerization with acrylamide(AM) and methacryloyloxyethyltrimethyl ammonium chloride(DMC) as monomers in compounded initiator system consisting of redox system and azo-compound.
采用氧化还原剂和偶氮类化合物组成的复合引发体系,通过水溶液聚合法制备丙烯酰胺(AM)和甲基丙烯酰氧乙基三甲基氯化铵(DMC)的共聚物。
2.
Inverse emulsion copolymerization of acrylamide(AM)and methacryloyloxyethyltrimethyl ammonium chloride(DMC) was studied using redox initiator.
采用氧化还原引发剂,反相乳液聚合法制备了丙烯酰胺(AM)和甲基丙烯酰氧乙基三甲基氯化铵(DMC)的共聚物。
补充资料:丙烯酰氧乙基三甲基氯化铵
分子式:CH2=CHCOOCH2CH2N(CH3)3Cl-
CAS号:
性质:是丙烯酸二甲氨基乙酯与氯甲烷反应后生成的季铵盐,可溶于水。主要用于均聚或与丙烯酰胺共聚制取阳离子型高分子絮凝剂。现倾向于由氯化甲基丙烯酰氧乙基三甲基铵代替。
CAS号:
性质:是丙烯酸二甲氨基乙酯与氯甲烷反应后生成的季铵盐,可溶于水。主要用于均聚或与丙烯酰胺共聚制取阳离子型高分子絮凝剂。现倾向于由氯化甲基丙烯酰氧乙基三甲基铵代替。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条