1) MnAl15 intermediate alloy
MnAl15中间合金
1.
While the best process conditions to produce MnAl15 intermediate alloy are as followed: the pressing pressure is 650Mpa,the use level of binding admixture is 0.
介绍了利用粉末冶金工艺生产MnAl25和MnAl15中间合金的过程及方法。
2) master alloys
中间合金
1.
Rapidly Solidified AlSr Master Alloys and Its Modifying Effect;
快速凝固Al-Sr中间合金及其变质效果
2.
The paper introduces the master alloys ,the sorts and the producing methods of master alloys and alsoanalyses the research status and prospect of master alloys.
介绍了用于铝合金的中间合金及其分类 ,中间合金的生产方法 ;分析了中间合金的研究现状及其前景。
3.
Al-Ti-C master alloys have been prepared by thermal explosion mode of self-propagating high-temperature synthesis (SHS ) using Al,Ti and C powder.
本文采用自蔓延高温合成中的热爆法,以Al粉、Ti粉、C粉为原料合成Al-Ti-C中间合金。
3) intermediate alloy
中间合金
1.
The method of intermediate alloy-vacuum distil lation for preparing high-purity dysprosium metal has been studied The influences of raw material purity and impurity removal by vacuum distillation were discussed.
采用中间合金-真空蒸馏工艺制备了高纯金属镝,考察了原辅材料纯度对高纯镝中主要非稀土杂质含量的影响,讨论了真空蒸馏法对杂质的去除效果,制得的高纯镝中主要非稀土金属杂质总和为70。
2.
This paper discusses intermediate alloy to minishment of crystal grain and the present condition of aluminium alloy On basis of analysis theory of minishment,new AlTiBRe intermediate alloy is studied for the first step The result shows that AlTiBRe intermediate alloy is the first kind efficiently long-last additive,its result is better than importing A15Ti
本文讨论了用于铝合金晶粒细化的中间合金研究与应用现状 ,在分析细化机理的基础上对新型细化剂AlTiB Re中间合金进行了初步探讨 ,结果表明 ,该中间合金是一种高效长久的晶粒细化剂 ,其效果优于进口的Al5TiB细化
3.
The results show that it is applicable to adopt the process flowsheet of HF gas fluoridization-preparation of intermediate alloy-vacuum distillation-low temperature-high temperature vaccum distillation for commercial production of high-purity Dy.
表明 :采用氟化氢氟化-制备中间合金 -低温蒸馏 -高温蒸馏的工艺流程 ,是工业生产高纯金属镝较为适宜的方
4) master alloy
中间合金
1.
Effect of rare earths on the microstructure and refining of Al-Ti-B master alloys;
稀土对铝钛硼中间合金组织及细化性能的影响
2.
Analysis of the microstructure character of a new type of AlTiBRe master alloy refiner;
新型Al Ti BRE中间合金细化剂的微观组织特征分析
3.
Research on precipitation of second phases for Al-Ti-B master alloy refiner;
Al-Ti-B中间合金中第二相沉淀现象研究
5) AlTiC master alloys
AlTiC中间合金
1.
Al, Al3Ti and TiC in the form of AlTiC master alloys and ZrO_2 particles were incorporated into alumina matrix ceramic materials.
将金属Al、Al3Ti和TiC以AlTiC中间合金的形式以及ZrO2颗粒共同引入Al2O3基体材料中,热压制备了Al2O3/TiC/ZrO2/AlN复合材料。
6) Aluminium-titianium master(alloys
A-Ti中间合金
补充资料：16-Dioxa-8,9,10,11-tetrathia-4,15-disilaoctadecane, 4,4',15,15-tretraethoxy-3
CAS：40372-72-3
分子式：C18H42O6S4Si2
分子质量：538.94
中文名称：4,4',15,15-四乙氧基-3,16-二氧杂-8,9,10,11-四硫杂-4,15-二硅杂十八烷 硅烷偶联剂G-407 双[γ-(三乙氧基硅)丙基]-四硫化物
英文名称：16-Dioxa-8,9,10,11-tetrathia-4,15-disilaoctadecane, 4,4',15,15-tretraethoxy-3
Coupling agent G-407
9,10,11-tetrathia-4,15-disilaoctadecane, 4,4,15,15-tetraethoxy-16-dioxa-8
bis[3-(triethoxysilyl)propyl]tetrasulfide
3,16-Dioxa-8,9,10,11-tetrathia-4,15-disilaoctadecane,4,4',15,15-tretraethoxy-
分子式：C18H42O6S4Si2
分子质量：538.94
中文名称：4,4',15,15-四乙氧基-3,16-二氧杂-8,9,10,11-四硫杂-4,15-二硅杂十八烷 硅烷偶联剂G-407 双[γ-(三乙氧基硅)丙基]-四硫化物
英文名称：16-Dioxa-8,9,10,11-tetrathia-4,15-disilaoctadecane, 4,4',15,15-tretraethoxy-3
Coupling agent G-407
9,10,11-tetrathia-4,15-disilaoctadecane, 4,4,15,15-tetraethoxy-16-dioxa-8
bis[3-(triethoxysilyl)propyl]tetrasulfide
3,16-Dioxa-8,9,10,11-tetrathia-4,15-disilaoctadecane,4,4',15,15-tretraethoxy-
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条