1) second cooling intensity
二冷水强度
2) intensity of secondary cooling
二冷强度
3) Forced Water cooling
强制水冷
1.
The forced water cooling can constrain efficiently the macrosegregation.
结果表明:自蔓延法合成的铜铬合金存在着富铜区、富铬区;合金由Cu,Cr两相组成,未形成新的共溶相;熔炼渣主要由Al2O3相组成;添加CaF2及提高铸模预热温度能够强化金渣分离效果,强制水冷能有效抑制合金的宏观偏析;当添加10%CaF2,铸模预热温度为500℃时,强制水冷条件下制备铜铬合金成分均匀、结构致密。
2.
Crystalline efficiency can be raised by forced water cooling.
在七水硫酸锌的生产过程中,循环水温度和氯离子影响七水硫酸锌的结晶效果,现通过强制水冷提高结晶效率。
4) forced oil and water cooling
强油水冷
1.
The underground 500 kV and 200 kV transformers and 66 kV and 220 kV reactors of the substation use forced oil and water cooling.
变电站地下的500、220kV变压器、66、220 kV电抗器采用强油水冷的冷却方式,设备的能量损耗发出的热量通过冷却塔排入大气中。
5) forced water cooling
强迫水冷
6) cooling strength
冷却强度
1.
The product properties such as tensile strength and electric conductivity effected by cooling strength and deformation were studied.
选择AZ31镁合金为原材料,在400℃下挤压散热片型材,就冷却强度及变形程度对制品的性能(抗拉强度和导电率)及组织结构的影响进行研究。
2.
Compounds in 7A52 alloy may not influence the processing property of product by means of three process parameters,such as,controlling the main element Mn in 7A52 alloy,and by aid of special moulding system and reasonably controlling cooling strength.
通过对7A52合金中的主要元素Mn等进行控制,辅以专门的供流系统,合理控制冷却强度等三大工艺参数,可以使7A52合金中的化合物不影响制品的加工性能,对提高制品的成材率有明显效果。
3.
Because taking some measures,such as selecting hot air valve with reasonable structure,improving cooling system of hot air valve and increasing cooling strength of hot air valve,etc,the service life of hot air valve is increased greatly in the practical process of vapourizing cooling of hot air valve in NO.
莱钢第二炼铁厂在热风阀汽化冷却实践中，通过采取选用结构合理的热风阀，改进冷却系统，提高冷却强度等措施，使热风阀寿命大幅度提高。
补充资料：表光合强度(见光合强度)
表光合强度(见光合强度)
forecast of sowing or transplanting time
b iaoguanghe qiangdu表光合强度见光合强度
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条