1) ferromagnetic
铁磁性能
1.
02) ceramics were prepared by hot press and normal methods respectively and their ferromagnetic properties were analyzed systematically.
02)陶瓷样品并对其铁磁性能进行系统分析。
2) ferromagnetic
铁磁
1.
Kondo effect in double quantum dots coupled to ferromagnetic leads;
与铁磁电极耦合的双量子点中近藤效应的研究
2.
Multiferroic materials with two or three kinds of coupled ferroelectric, ferromagnetic, and ferroelastic properties attract more and more attentions both in academic and engineering societies because of their wide potential applications.
多重铁性材料是一类可以同时具有(反)铁电、(反)铁磁及铁弹中两者或两者以上耦合性质的多功能材料,其丰富的物理现象和颇大的应用潜力受到学术和工程领域的广泛关注。
3.
Multiferroic materials have not only single ferroelectric,ferromagnetic and ferroelastic properties,but also multiferroic coupling effects,which lead to new effects.
多铁性材料由于其不但具有单一的铁性(如铁电性、铁磁性和铁弹性),而且由于铁性的耦合协同作用,会产生一些新的效应,使其可广泛应用于换能器、传感器、敏感器、多态存储等高技术领域。
3) ferromagnet
铁磁
1.
Perpendicular and longitudinal exchange biasing inferromagnet/antiferromagnet multilayers;
铁磁/反铁磁多层膜中纵向和垂直交换偏置
2.
Taking into account the spin polarized and interface roughness scattering effect, within scattering formalism, we calculate the shot noise in the ferromagnet superconductor tunneling junction.
考虑到铁磁层中的自旋极化效应与粗糙界面散射效应 ,利用散射理论 ,讨论铁磁 超导隧道结中的散粒噪声 。
3.
And the interaction in Mn+4-O-Mn+4 increased the transitional temperature from antimagnetism to ferromagnetism.
结果表明:随着Li/Mn比例的增加,Mn+4数量增加,90°的Mn+4-O-Mn+4的铁磁相互作用使居里温度升高,样品由反铁磁性逐渐向铁磁性过渡。
4) FM/AFM
铁磁/反铁磁
1.
Monte Carlo method is used to study hysteresis loops of FM/AFM systems with FM core embedded in an AFM matrix in a classical Heisenberg model.
利用经典Heisenberg模型和Monte Carlo方法研究外磁场和反铁磁磁晶各向异性、交换相互作用对铁磁球均匀嵌入到反铁磁基体中的铁磁/反铁磁纳米体系磁滞回线的影响。
5) FM-AFM
铁磁-反铁磁
6) ferromagnetic-antiferromagnetic coupling
铁磁-反铁磁耦合
参考词条
补充资料:磁性材料2.薄膜磁性材料
磁性材料2.薄膜磁性材料
Magnetie Materials 2.Thin Film
在一定外加磁场作用下,其反磁化畴(磁矩取向与外磁场方向相反的畴)变为圆柱形磁畴。从膜面上看,这些柱形畴好像浮着的一群圆泡,故称磁泡或叫泡踌(另见磁性材料2.昨晶态磁性材料)。在特定的电路图形、电流方向和一定磁场情况下,可做到控制材料中磁泡的产生、传翰和消失,实现信息的储存和逻辑运算的功能。磁泡的直径在微米量级(0 .5~5协m),每个磁泡的迁移率在1 .26~12.6em八s·A/m)〔 102一i03cm八s·oe)〕,因而可制成存储密度为兆位/cmZ(Mbit/cmZ)和数据处理速率为兆位/s(M肠t/s)的运算器件。磁泡器件经过近20年研究和开发,已取得广泛的实际应用。 对磁泡材料的主要要求是:(l)各向异性常数凡>粤斌,磁化强度从>外磁场强度H;(2)杂质缺陷小,2一~”~’.J泌~-一‘产’~~一~一’、~尹一~~~’J”均匀性好。目前研究得比较清楚的有铁氧体单晶薄膜和稀土一过渡金属薄膜。从制备工艺和性能稳定、器件开发等情况看,以铁氧体磁泡材料比较成熟,早期是用钙钦石型铁氧体单晶片来作磁泡材料,后为YIG单晶薄膜所取代。它是用液相外延法在Gd3Ga5OI:(简称GGO)基片上生成的单晶薄膜,其厚为微米量级。表4为稀土石榴石R3FesolZ的磁性;表5为一些磁泡材料的基本特性数值。农4稀土石抽石R.Fe‘ol,的磁性┌───────────┬────┬────┬────┬────┬────┬────┬────┬────┬─────┬────┬────┐│R │Y │Sm │EU │Gd │Tb │Dy │、Ho │Er │T】11 │Yb │Lu │├───────────┼────┼────┼────┼────┼────┼────┼────┼────┼─────┼────┼────┤│补偿温度,~p,K │ 560 │ 560 │ 570 │ 290 │ 246 │ 220 │ 136 │ 84│4
说明:补充资料仅用于学习参考,请勿用于其它任何用途。