1) yttrium nitride
氮化钇
1.
Two steps of preparing yttrium nitride powder are adopted,temperature,time and vacuum which influences ratio of atom are studied,the most convenient technique for preparing yttrium nitride powder is determined,and yttrium nitride powder of 0.
采用两步法制备氮化钇(YN)粉末。
2) introduction of yttrium
氮化钛铝钇
3) yttria
[英]['itriə] [美]['ɪtrɪə]
氧化钇
1.
Solid State Synthesis of Nanometer-Yttria Powder Precursor and Dispersion Stability of Suspension;
纳米氧化钇粉体前驱体固相法合成及其悬浮液分散稳定性
2.
Structure and properties of polypyrrole/yttria nanocomposite material;
聚吡咯/纳米氧化钇复合材料的结构与性能研究
3.
Effects of yttria on structure and properties of CaO-BaO-Al_2O_3-SiO_2-GeO_2 glasses;
氧化钇对CaO-BaO-Al_2O_3-SiO_2-GeO_2系玻璃结构与性能的影响
4) yttrium lanthanum oxide
氧化镧钇
1.
A new kind of neodymium ion(Nd3 +)doped yttrium lanthanum oxide(Nd:Y 1.
用碳酸盐共沉淀法制备一种新的掺钕氧化镧钇(Nd:Y1。
2.
Highly transparent Yb3+-doped yttrium lanthanum oxide laser ceramics with Yb3+doping content up to 10% (in mole) were fabricated by conventional process and pressureless sintering at low temperatures in H2 .
采用传统陶瓷烧结工艺,在无压还原气氛中低温制备了Yb3+掺杂量高达10%(按摩尔计)的透明性良好的氧化镧钇激光陶瓷,研究了其在室温的吸收光谱、发射光谱以及荧光寿命。
3.
There has also been research progress recently in Nd:YAG and Yb/Nd doped yttrium lanthanum oxide transparent ceramics in China.
报道了中国近来在Nd:YAG和Yb/Nd掺杂的氧化镧钇透明陶瓷方面的研究进展,由中国科学院上海硅酸盐研究所制备的Nd:YAG陶瓷激光器最大激光输出斜率效率为23。
5) yttrium oxide
氧化钇
1.
Preparation of yttrium oxide nanopowders;
氧化钇纳米粉体材料的制备
2.
Determination of Trace Cerium in Yttrium Oxide at Fluorescence Grade by Inductively Coupled Plasma Atomic Emission Spectrometry and Ion Selective Electrode Method;
电感耦合等离子体原子发射光谱法及离子选择电极法测定荧光级氧化钇中痕量铈的研究
3.
Neural networks method for parameter determination of yttrium oxide ultrafine making;
确定氧化钇微细粉制备条件的神经网络方法
6) Y_2O_3:Eu
氧化钇铕
1.
In this paper,electrochemical deposition of red luminescent Y_2O_3∶Eu thin films on transparent conducting optically(ITO) glass substrates by cathodic reduction of yttrium nitric has been investigated.
本研究采用电沉积-烧结方法制备出了氧化钇铕红色荧光薄膜。
补充资料:氮化硅晶须补强氮化铝陶瓷基复合材料
分子式:
CAS号:
性质:以氧化铝陶瓷为基体,氮化硅晶须为增强体的复合材料,是一种性能优异的耐高温结构陶瓷。加入氮化硅晶须,可使氧化铝陶瓷的强度、韧性、抗热震性等得到明显的改善。在氧化铝基体中,加入20%(质量)氮化铝晶须制得的复合材料基强度提高了约50%,断裂韧性KIC达到氧化铝基体的1.5倍。这种材料可用于机械受力及耐磨部件以及作为耐热、耐腐蚀部件。
CAS号:
性质:以氧化铝陶瓷为基体,氮化硅晶须为增强体的复合材料,是一种性能优异的耐高温结构陶瓷。加入氮化硅晶须,可使氧化铝陶瓷的强度、韧性、抗热震性等得到明显的改善。在氧化铝基体中,加入20%(质量)氮化铝晶须制得的复合材料基强度提高了约50%,断裂韧性KIC达到氧化铝基体的1.5倍。这种材料可用于机械受力及耐磨部件以及作为耐热、耐腐蚀部件。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条