1) lateral pressure
侧压力
1.
Computation of lateral pressure in sizing press;
调宽压力机的侧压力计算
2.
The estimation of the plastic deformation destabilization area and the lateral pressure in large H-section straightening;
大型“H”型钢压力矫直塑性变形失稳区域及侧压力的估算
3.
Experimental study of lateral pressure produced by grass silage on silo walls;
青贮饲料对青贮池墙体侧压力的试验研究
2) side pressure
侧压力
1.
Based on the side pressure and buoyancy produced during constructing and shaking concrete,the characteristic and effect factors about the above were discussed in this paper.
针对砼浇筑和振捣过程中产生的模板侧压力和上浮力,分析了侧压力的特点和影响因素,在此基础上开展空心板试验梁侧压力和上浮力现场试验,测试结果与现行公式作比较,结果吻合良好。
2.
We have demonstrated Faraday longitudinal tension and side pressure with some examples and briefly introduced its application.
对法拉第纵张力和侧压力作出了证明,通过例子进行了验证,并简要阐述了它的应用。
3.
It workes out the uplift force,side pressure,down force and horizontal force of bridge structure in practice by means of the theory of computation,compares them with test results of models,and draws the practical conclusion for engineering design.
阐述波浪力对桥梁结构受力的计算理论,引入工程实例,运用计算理论得出实际工程中桥梁结构所受的上托力、侧压力、下压力和水平力,将其与模型试验结果进行对比,得出对工程设计较为实用的结论。
3) Wall pressure
侧压力
1.
Study of calculation methods for wall pressure of granular materials in squat silos;
浅圆仓散料侧压力计算方法研究
2.
The structure of grain storehouse is created as elastic structure using parallel bond model provided by DEM, the wall pressure is analyzed when filled with specific granular material under gravity loading.
采用离散元方法模拟平房仓结构模型,并计算了平房仓结构侧压力,讨论了对侧压力的各种影响因素主要是散体的重力密度,以供类似结构参考借鉴。
3.
Rankine theory and Coulomb theory are not suitable for the calculation of wall pressure by bulk materials, so this paper studies the actual distribution and calculation methods for the wall pressure in squat silos.
ankine理论和Coulomb理论均不适合用于浅圆仓的侧压力计算 。
4) Compression side
压力侧
1.
Biomechanical study of the long bone fracture fixation with the compression side defect;
骨干骨折压力侧皮质缺损钢板内固定的生物力学研究
5) confining pressure
侧向压力
1.
An equipment for dynamic direct tension tests of rock material under confining pressure;
有侧向压力的岩石材料动态直接拉伸试验装置
6) lateral pressure instrument
侧压力仪
补充资料：锅炉、压力容器、压力管道及特种设备定期检验
锅炉、压力容器、压力管道及特种设备定期检验
periodic inspection of boilers, pressure vessels, pressure piping and special equipment
guolu YOli侧飞扣1 YOli gLJal对印ji tez陌叩劝以拍1 dingqi】，on四n锅炉、压力容器、压力管道及特种设备定期检验(peri诫c inspectionof城le。，p~切reves-Sels，p~二piPing ands衅过闪uiplr屺nt)为保证设备的安全使用，规定设备必须按一定周期进行法定的、强制性的检验。定期检验由政府设立的检验所、使用单位或行业检验站进行。检验单位及检验人员必须具有与所检设备相适应的资格。设备使用单位应该建立定期检验制度，做好检验计划，按时向检验单位提出申请。检验单位应该保证及时进行检验，检验按有关检验规则进行。检验时，设备使用单位应做好配合工作，提供必要的运行资料。检验完毕，检验单位要出具检验报告，对设备能否使用，要作出明确结论。如设备有缺陷，要提出是否修理、监护使用和报废的处理意见。锅炉压力容器安全监察机构根据检验机构的报告，发使用许可证书。有缺陷的，责令使用单位修理，修理后检验仍不符合安全要求的，则通知报废。使用单位逾期不进行定期检验，锅炉压力容器安全监察机构有权停止其设备运行。(陈亦惠)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条