1) simulation of molding
充模仿真
1.
Taking slide part as an example,the whole process of simulation of molding and mold opening for moul.
以滑动器模具为例,介绍了模具成型零件的充模仿真和开模仿真的过程。
2) imitation with expansion
扩充模仿
3) simulation models
仿真模型
1.
Parameter estimation new algorithms in static simulation models for urban traffic organization and optimization;
城市交通组织优化仿真模型的参数估计新方法
2.
The simulation models for axial vibration of rod string in directional wells were set up.
综合分析了复杂结构定向井井眼轨迹、杆管间摩擦力、抽油机悬点运动规律、抽油泵气体影响或供液不足的井下实际边界条件对抽油杆柱轴向振动的影响,建立了定向井抽油杆柱轴向振动仿真模型,利用该模型实现了悬点与泵示功图的自动快速仿真。
3.
Methods\ Dynamic simulation models of complex structure joints are established via equivalent simulation or equivalent replacement methods.
方法 通过当量模拟或等效置换建立复杂结构结合部动力学仿真模型 。
4) simulation
[英][,sɪmju'leɪʃn] [美]['sɪmjə'leʃən]
仿真模拟
1.
Numerical simulation for demolition of structures;
建(构)筑物控制爆破拆除的仿真模拟
2.
The whole simulation on bending-resistance of reinforced concrete beams;
钢筋混凝土梁抗弯性能的全仿真模拟
3.
Analysis of Typical Explosive Trains and its Computer Simulation;
典型传爆序列分析及其仿真模拟研究
5) Analog simulation
仿真模拟
1.
The theoretical analysis and analog simulation show that there is a critical value (λd)c in this model,and only when the product of spread efficiency and crowd density goes beyond the critical value(λd)c that the disease can spread continuously and steadily in a crowd.
理论分析和仿真模拟表明该疾病传播模型存在一个临界值(λd)c,只有当群体传播效率和群体密度的乘积λd大于(λd)c时,疾病才能在群体中持续稳定地传播。
2.
Based on the comparison of current way of stop and parking organization at three types of bus bay stop, and full consideration of the impact on road traffic, time for bus parking and comfort of passengers, an appropriate way of parking organization is proposed, and Visual Basic is used for its analog simulation.
通过比较现有的3种港湾式公交站的停靠组织方法,在全面考虑对路段交通影响、车辆停靠时间和乘客舒适度的基础上,提出了1种合理停靠组织方法并采用VisualBasic程序仿真模拟。
3.
Author points out that construction method and analog simulation of bridge should be paid more attention.
通过采用MIDAS软件分析了一座斜靠式钢拱桥的各阶段的受力特性,对该桥梁的实际施工过程进行了模拟,分析了施工时临时支撑的设置引起脱空现象的原因,通过分析该模型结构,说明了应重视桥梁的施工方法及对施工实际的仿真模拟。
6) simulation model
仿真模型
1.
Review on simulation model in the research of the remaining oil;
仿真模型在剩余油研究中的应用综述
2.
Establishment of system dynamic simulation model for environment of mining area;
矿区环境系统动力学仿真模型的建立
3.
Dynamic model of oil reservoir and simulation model of remaining oil;
油藏动态模型和剩余油仿真模型
补充资料：充炭黑充油丁苯橡胶
分子式：
分子量：
CAS号：
性质：同时含有炭黑和油的丁苯橡胶。性能和用途与充炭黑丁苯橡胶和充油丁苯橡胶相似。由冷聚丁苯胶乳与炭黑的水分散液和油乳液经混合、凝聚、洗涤、过滤、干燥等步骤制得。
分子量：
CAS号：
性质：同时含有炭黑和油的丁苯橡胶。性能和用途与充炭黑丁苯橡胶和充油丁苯橡胶相似。由冷聚丁苯胶乳与炭黑的水分散液和油乳液经混合、凝聚、洗涤、过滤、干燥等步骤制得。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条