1) Severe Cold Plastic Deformation
大冷变形
1.
Effects of Aging on Mechanical Properties of 2024 Aluminum Alloy by Severe Cold Plastic Deformation;
时效制度对大冷变形2024铝合金力学性能的影响
2.
The effects of severe cold plastic deformation of three testing process on the microstructure and elongation of the 2024 aluminum alloy were investigated by means of mechanical tensile test,SEM and TEM observations.
通过力学性能检测、扫描电镜和透射电镜观察,研究了3种工艺下大冷变形对2024铝合金组织和性能的影响。
2) cold large strain processing
大变形冷加工
3) cold-drawing deformation
冷拉形变
1.
The compound strengthening and toughening of sub-critical quenching and cold-drawing deformation on 20CrMnMo steel was studied.
对20CrMnMo进行亚温淬火热处理和冷拉形变的复合强韧化研究。
4) cold deformation
冷变形
1.
Investigation on cold deformation and dynamic recrystallization of Cu-Ni-Si-Ag alloy;
Cu-Ni-Si-Ag合金冷变形及动态再结晶研究
2.
Effect of cold deformation and tempering on ductility of low carbon martensite steel;
冷变形低碳马氏体钢的回火塑性
3.
Effects of Cold Deformation on Super-elasticity and Microstructure of TiNiCr Shape Memory Alloys;
冷变形对TiNiCr形状记忆合金超弹性和组织的影响
5) cold rolling
冷轧变形
1.
The effect of cold rolling deformation prior to aging on the strengthening of a maraging steel was investigated.
系统研究了预先冷轧变形对马氏体时效钢强化的影响,研究结果表明:510℃×3 h时效引起的强度净增加值恒定,与冷轧变形量无关,最终的强度为:σ=σ0+ΔσCR+ΔσAge,即初始强度、冷加工强化和时效强化的叠加,其中只有冷加工强化ΔσCR随变形量变化。
2.
The article introduces microstructure evolution and mechanical hardening of three different kind steels during cold rolling.
本文介绍了三种钢在冷轧变形过程中的组织演变和形变强化规律，发现三种钢具有不同的形变强化规律。
6) cold upsetting deformation
冷压形变
补充资料：高纯铝(LO_(3))冷变形和再结晶过程显微组织
高纯铝(LO_(3))冷变形和再结晶过程显微组织
历史·金属材料高纯铝(L【】。)冷变形卸再结晶过程显缴细甥玲 轧制 样黑 明放大倍数260。c保温30分钟后组织280。c保温30分钟后组织3sO。c保温30分钟后组妇480。c保温30分钟后组织5s0。c保温30分钟后组蛔再结晶刚开始再结晶晶粒增多再碧晶基本完威晶粒开始长走晶粒急刷长大 # 凄 b 极‘阴两牝量拙光形解振∞变电煸×
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条